AWA MSDV2611-O3-D0 User Manual

MSDV2611-O3-D0

26" 66cm HD LCD Television

with Built in DVD Player

USER MANUAL

Thank you for purchasing this LCD TV. Before connection and operation of this

product please read the manual carefully and completely.

Please keep this manual for future reference.

N294

Version 1.1

Contents

-1-

INTRODUCTION..............................................................................1

SAFETY AND WARNINGS............................................................. 2-4

BASE STAND ASSEMBLY INSTRUCTION..........................................5

WALL MOUNTING INSTALLATION GUIDELINES................................6

INSTALLATION...........................................................................7-12

REMOTE CONTROL.................................................................13-14

OPERATION.............................................................................15-19

ELECTRONIC PROGRAM GUIDE (EPG MENU)................................20

PERSONAL VIDEO RECORDER (PVR)............................................21

DIGITALMEDIA PLAYER (DMP)...................................................... 24

DVD OPERATION......................................................................25-28

DVD TROUBLE SHOOTING............................................................ 29

TROUBLE SHOOTING................................................................... 30

TECHNICAL SPECIFICATIONS.......................................................31

-2-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

CAUTION

This symbol indicates that dangerous
voltages, constituting a risk of electric
shock are present within this unit.

This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.

To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings,
install in accordance with the instructions.

8) Do not install near any heat sources such
as radiators, air conditioners, stoves, or
other apparatus (including amplifiers) that
produce heat.

9) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

10) Only use attachments/accessories
specified by the manufacturer.

11) Unplug this apparatus before lightning
storms or when unused for long periods of
time.

12) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

13) The Mains plug is used as the power
disconnect device, and the disconnect
device shall remain readily accessible and
operable.

14) The ventilation should not be impeded
by covering the ventilation openings with
items such as newspapers, table-cloth,
curtains, etc.

15) No naked flame sources, such as
lighted candles, should be placed on or
near the apparatus.

16) This device is not warranted for use in
unreasonably hot, cold, or humid

environments.

17) The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, shall be placed
on or near the apparatus.

This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only

identical replacement parts.

The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.

WARNING:

-3-

High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set.
Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not
expose the television receiver to rain or moisture.

Do not drop or push objects into the television
cabinet slots or openings. Never spill any kind
of liquid on the television receiver.

Do not block the ventilation holes in the back
cover.
Adequate ventilation is essential to prevent
failure of electrical components.

Do not trap the power supply cord under the
television receiver.

Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if it
falls.

Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an individual,
and damage to the television may result if it falls.

When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the from theAC outlet.AC power cord

Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.

If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.

Dim:515*320mm(）

SAFETY AND WARNINGS

-4-

SAFETY AND WARNINGS

CAUTION
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in

this manual.
All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD
PANEL or CABINET, the power cord should be physically removed from the mains outlet. You may
then wipe the TV with a dry soft cloth. Before thunder and lightning events arrive, unplug the power
cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be
performed by qualified TV service personnel.

Warning: Change or modifications to this unit not expressly by the part responsible for compliance
could void the user 's authority to operate the Equipment.

a. Do not expose to dripping or splashing.
b. No objects filled with liquids, such as vases, shall be placed on or near the apparatus.
C. is used as the power disconnect device and shall remain readily
accessible and operable.
d. No naked flame sources, such as lighted candles, should be placed on or near the apparatus.
e. Allow suitable distances around the apparatus for sufficient ventilation. Ventilation should not be
impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and
such like.

The mains plug of this device

The display panel is a very sensitive high technology product, giving you finely detailed
pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of
black, blue, green or red. Please note that this does not affect the performance of your product.

About After- Image:
The extended use of fixed image programme material can cause a permanent after - image on
the screen. This background image is viewable on normal programs in the form of a stationary
fixed image. This type of irreversible screen deterioration can be limited by:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display any fixed image for extended periods of time.
C. Turn the power off when not in actual use.

Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed
Image Displays.
Do not allow a still picture to be displayed for an extended period, as this can cause a
permanent after-image to remain on the screen.

Examples of still pictures include logos, video games, computer images, teletext and images
displayed in 4:3 mode.

CAUTION:
The permanent after-image on the screen resulting from fixed image use is not an operating
defect. This product is not designed to display fixed images for extended periods of time.

-5-

This STAND INSTALLATION GUIDE is provided to help you easily install the stand. Please carefully follow
Step 1 through Step 3.

STAND INSTALLATION GUIDE

Open the b ox and find t he pa rts

Open the box and find the following parts.

- Stand x1 p c

- Screws x 4 p cs

Packing

Stand

Packing

TV

Screws

Stand

Place th e Stand on th e TV

1. Place the TV with the display side down
on a table or desk (flat, totally clean surface).

2. Place the Stand on the TV as shown below.

Stand

Secure t he Stand to t he TV

Secure the Stand to the TV by using the 4 supplied screws.

12

43

For wall mounting with the optional bracket, please read the following instruction and the
bracket instruction. Make sure qualified service personnel perform the operation.
AWAbears no responsibility for improper mounting that results in accident or injury.

Wall Mounting Holes Spacing and Location

Base Stand Disassemble Illustration

How to remove t he st and from the TV

(The LCD Display is very fragile, and must be protected at all times when removing the
base stand. Be sure that no hard or sharp object, or anything that could scratch or
damage the LCD display, comes into contact with it. DO NOT exert pressure on the front
of the unit at any time because the screen could crack.)

1.Use the screwdriver to remove 4 screws from the screw location.

2.Remove the base stand from the Main body.

4 Wall mount M4 Screws

-6-

INSTALLATION

200 mm

100 mm

FRONT PANEL

AC Power Cord.........................1

Infrared Remote Control............1

User's Manual ........................ 1

Battery (AAA).......................... 2

ACCESSORIES

INSTALLATION

-7-

Stand mounting screws.........................4

Wall mounting M4 screws......................4

3

1 2 3

4 5 6

7 8 9 0

+

CH

_

+

_

VOL

30 30

1
2

(on side of TV).

4: Main power switch (on bottom rear of TV)

1: Remote control sensor.

2: Indicator LED:

GREEN = POWER ON.

RED = STANDBY.

3: Key board

4

INSTALLATION

KEY BOARD

REAR PANEL

-8-

All the terminals are (from left to right):
AC Power input, HDMI2 input, HDMI1 input, YPbPr , AV1 input,
Rear Audio input, PC AUDIO input, AV output, VGA input, Antenna socket.

Note: 1. AV1 and YPbPr share the Rear Audio input channel.

2. When HDMI1 port receives a DVI signal, the matching audio signal is received by
the PC Audio input.

(component video) input

1. SOURCE:

2. MENU:

3. CH+/CH-

4. VOL+/VOL-

5. STANDBY

Displays the input source Menu.

Displays the main MENU.

In TV mode, press "CH+" or "CH-" to change the channel up and down.
In MENU mode, press "CH+" or "CH-" to select items.

Adjusts the sound level.
In MENU mode, press "VOL+" or "VOL-" to adjust the item that you have selected.

Once the TV's main power switch has been activated, press this button to turn the
unit ON from STANDBY mode.
Press it again to return the set back to STANDBY.

SOURCE

MENU

CH+

CH-

VOL+

VOL-

STANDBY

VGAINPUT

RF INPUT

PC

AUDIO INPUT

100-240V~ 50/60Hz

AC-INPUT

HDMI1INPUT

HDMI2 INPUT

AV

L

R

AV OUTPU T

ANTENNA CONNECTION

INSTALLATION

Note:
Aerial connections: IEC(female).
Input impedance: 75 unbalanced.

-9-

STEPS:

CONNECTING TO PC

Be sure both the TV and computer are set to Power off.

1.Connect VGA and audio cable.

2.Connect the power cord.

3.Power on the TV, switch the input source to VGAmode.

4.Power on the PC.

This sequence is very important.

INSTALLATION

-10-

VGAINPUT

RF INPUT

PC

AUDIO INPUT

100-240V~ 50/60Hz

AC-INPUT

HDMI1INPUT

HDMI2 INPUT

AV

L

R

AV OUTPUT

VGA and audio cable

not supplied

PRESET MODE

INSTALLATION

PC PRESET

-11-

1

2

3

4

5

6

7

720*400

640*480

800*600

800*600

800*600

1024*768

1024*768

70

60

56

60

72

60

70

31.47

31.47

35.156

37.88

48.08

48.36

56.48

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

The above resolutions are the only ones guaranteed to be supported. Other resolutions up to
1920 x 1080 may also be supported, but this must be assessed by the user on a case-by-case
basis. This is also subject to the limitiations of the computer ’s video card.

INSTALLATION

CONNECTING TO AV EQUIPMENT

-12-

It can be connected to the following appliances: VCR,
multi disc player, DVD, camcorder, video game or

stereo system, etc.....

YPbPr can support these video
formats: 480i,576i,480p,576p,720p,1080i.

Side panel inputs:
The side panel inputs provide one composite video
input, and one pair (stereo) of Audio inputs.

(component video)

This TV provides two group of AV, one group of YPbPr (component video) inputs for convenient
connection to VCR, DVD or other video equipment. Please refer to the owner's manual of the
equipment to be connected as well.

You can use the input terminals on TV set rear as follows.

W

R

To audio outputs

VIDEO EQUIPMENT with Composite output

TO VIDEO output

W R

W R

GBR

G

B

R

Yellow (video)

White(audio L)

Red(audio R or Pr)

Y

W

R

Blue(Pb)

Green(Y)

B

G

HDMI

VIDEO EQUIPMENT with YPbPr (component) output

W

R

W

R

W R

TOAUDIO INPUTS

VIDEO EQUIPMENT

TO VIDEO
INPUTS

VGAINPUT

RF INPUT

PC

AUDIO INPUT

100-240V~ 50/60Hz

AC-INPUT

HDMI1INPUT

HDMI2 INPUT

AV

L

R

AV OUTPU T

USB

VIDEO

L

R

AV2

-13-

REMOTE CONTROL

Remote Control - TV section

1: :Press to turn the unit on or off.
2: :Press for direct access to channels.
3: :Press to display TV Main Menu.
4: :Press to scroll through the Menu.
6: :Press to adjust the sound level.
7: :Press to switch between picture modes.
8: :Press to set Sleep Timer.
9: :Press to record the TV program you are watching in
DTV mode,
10: :Press to switch between TV and Radio modes.
11: :Press to display the 7 Day Electronic Program Guide
For information on the show you are watching.
12: :Press to access your favourite channels list in TV or
DTV mode.
15: :Press to rewind play in USB Mode .
16: :Press to Fast Forward play in USB mode .
17: :Press the Play Button in USB Mode to begin or
continue Playback.
18: :Press the Pause Button to pause play in USB Mode .
19: :Refer to page 14.
20: :Press to disable or enable the sound output.
21: :To select the available audio language of TV
programs.
22: :Press to return to the previously viewed
channel.
23: :Press to display the Input Source List.
24: :Press to confirm Menu selections.
25: :To exit the main menu, press the Exit Button or to
cancel setting selections.
26: :Press to switch between the sound modes.
27: :Press to scroll through your Channel List.
28: :Press to change the picture aspect ratio.
29: :Press to enter or exit TELETEXT mode.
30: :To display the program information of the show you
are watching, press the Info Button.
33: :Press to skip the next file or track in
USB Mode.
34: :Press to skip the previous file or
Track in USB Mode.
35: :To turn on Subtitles press the Subtitle Button
in DTV mode.
36: :
37: :Press to freeze the picture you are watching.

POWER
NUMERIC KEY
TV MENU
CURSOR
VOL+/­PIC
SLEEP
REC

TV/RADIO

EPG

FAV

REWIND

FAST FORWARD

PLAY

PAUSE
TELETEXT KEYS
MUTE
TV/AUDIO

RECALL/GOTO

SOURCE
OK
EXIT

SOUND
CH+/CH­ASPECT
TEXT
INFO

SKIP FORWARD

SKIP BACKWARD

SUBTITLE

FREEZE

Press to stop playing in USB mode.

DVD/USB

NOTE: For the function of DVD button, please

refer to t he DVD part a t the b ack of t his
instruction book. ( )Page 25-28

-14-

REMOTE CONTROL

TELETEXT

T

EXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press:

You will obtain:

LIST

Enter the number of the page required using the 0 to 9 up/down.
Example: pa ge 12 0, enter 120. Th e number is d isp lay ed top left , the
counter turns and then the page is displayed. Repeat this operation to
view another page. If the counter continues to search, this means
that the page is not transmitted. Select another number.

Coloured buttons correspond to the colours at the bottom of the
screen. The 4 coloured keys are used to access the items or
corresponding pages. The coloured areas flash when the item or the
page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume sub­page acquisition. The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

The user can set four favourite pages to be directly linked to the four
color keys. While list mode is activated, it is not possibility to use TOP
or FLOF navigation with the colourkeys. The favourite page numbers
should be stored and restored to/from nonvolatile memory for each
channel by the system software.

This is used to call or exit teletext modes. The summary appears with
a list of items that can be accessed. Each item has a corresponding
3 digit page number. If the channel selected does not broadcast
teletext, the indication 100 will be displayed and the screen will
remain blank (in this case, exit teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be
consulted like a newspaper. It also offers access to subtitles for viewers with hearing
problems or who are not familiar with the transmission language (cable networks,
satellite channels, etc.)

-15-

OPERATION

Installation Guide

Press to select search type, then press to select country (eg. Australia), then press the OK
button to start auto tuning.

This screen only appears when the TV is turned on for the first time, or reset to factory settings. You can
choose language, country and auto tuning programs.After tuning, the screen will skip to the first DTV program.

1.CHANNEL MENU

The first item of the MENU is channel menu (for ATV or DTV source only). ATV = Analogue TV, DTV = Digital TV.

You can search channels and edit programs here.

1).Auto Tuning:

Search all the channels automatically (you can select ATV, DTV, or DTV+ATV searching).

ATV ManualTuning
Programme Edit
Signal Information

< >

CHANNEL

Auto Tuning

DTV ManualTuning

Software Update(USB)

Software Update(OAD)Off

Dansk

Deutsch

Hrvatski

Italiano

Please select an OSD Language

OK

Magyar

Nederlands

Norsk

PolskiEnglish

Cesky

E ka

Espanol

~

Fra n ais

Portugues

Pycck

Austria

Belgium

Country

OK

Australia

Croatia Finland Greece

Luxembourg

Czech France Hungary

Netherlands

Bulgaria Denmark Germany Italy

Tune Ty pe DTV+ ATV

MENU

Austria

Belgium

Australia

Croatia

Czech

Bulgaria

Finland

France

Denmark

NOTE:

All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type is set to DTV+ATV.

Any previously stored channels will be deleted after auto tuning is carried out.

After auto tuning, the receiver will skip to the first DTV channel.

The radio channels are the ones provided by some TV stations. This unit does not receive
DAB+Digital Radio broadcasts.

Channel Tuning

TV : 0 Pr ogram me(s)
DTV : 0 P rogra mme(s )
Radio : 0 Programme(s)

96% U HF CH 68 DT V

To select the MENU mode, press the menu button on the side keyboard of the TV, or press the TV/menu button
on the remote control.

2).DTV Manual tuning:

You can select a DTV channel then find the program in this channel.

Press to select the channel, then press OK to search the programs .

OPERATION

NOTE:

The Bad Normal Good bar graph on this screen shows signal intensity during DTV reception only.

3). ATV Manual tuning :

You can change the sound system, search the analog TV channels and fine tune them, then store the
channels you selected. InAustralia, select the BG sound system.

""

ATV ManualTuning

Storage To 1

System BG

Current CH 1

Search

Fine-Tune

Frequency 255.25 MHz

Sav e MENU

_

+

DTV Manual Tuning

VHF C H 5

_

+

Bad Nomal

Good

Press OK to search

NOTE:

Press the teletext red button on the remote control to store the channels after manual tuning.

4).
You can Delete, Rename, Move, Skip, or FAV most TV programs.

Program edit:

-16-

Rename:

You can only rename ATV programs.
Move the cursor to the program, press t he telete xt green bu tton to ren ame the program.
Press to choose the character. Press to move the cursor .
Press MENU button to exit edit, Press EXIT to ex it the menu.
Note: ATV program names can only be 5 characters long, DTV program names can be up to 25 characters.

Press to choose the program, press the teletext blue button to skip this program, the symbol will
show on the right side of the program.
Choose the skipped program, press the blue button again, you can cancel the skip and the symbol will
disappear.

Delete

Press t he teletext red button, the program in the cursor will be deleted.

Favourite

Press to choose the program, press the FAV button and it will show on the right side of the program.
Choose the FAV program, press FAV button again, you can cancel the FAV and will disappear .

Once your favorite group is created, you can press the FAV key to quickly access your favourite channel.

-17-

OPERATION

The second item of the MENU is PICTURE MENU.You can adjust picture effects here, such as contrast,
brightness, etc.
Press to move, press OK to adjust.

2. PICTURE MENU

Color Temperature

Aspect Ratio

Noise Reduction
Screen

Picture Mode Standard

< >

PICTURE

MENU

Picture Mode Standard

Contrast 50

Brightness 50

Color 50

Sharpness 50

Tint 50

Color Temperature Medium

Red 50

Green 50

Blue 30

MENU

NOTE:

1).Tint is available in NTSC system only.

2).There are four color temperature modes that can be selected: medium, warm, cool, user.

3).The Screen opti on is only available once the Input Source is set to PC , which allows you to adjust
Horizontal position, vertical position, size and phase or select an AutoAdjust mode.

""

TV default mode seting is standard mode and it is recommended for end used watch at home.""

3.SOUND MENU

The third item of the MENU is the SOUND MEN U.
You can adjust the sound effect here such as treble, bass, balance etc.
Press to move, press OK to adjust.

< >

Balance

Auto Volume

Sound Mode Standard

SOUND

Note:

Auto volume: only available when the input signal volume is too large or there is distortion.

4.TIME MENU

The fourth item of the menu is the TIME MENU. You can adjust the clock, power on/off time, sleep time etc
Press to move, press OK to adjust.

NOTE:

The clock time is automatically set by the Digital TV transmissions.

Off Time
On Time
Sleep Timer
Auto Sleep
Time Zone

Clock -- -- -- --

TIME

< >

Displays the signal information in DTV (digital TV) mode only.

Do not attempt to use this option unless you have a valid software program for the

TV stored on a compatible USB drive, an d the drive i s connect ed to the TV. Pleas e
remove the antenna cable from the TV RF port, go to the channel Menu, select Software Update (USB)
and press OK to run the software update.

5). Signal Information:

6). Software Update:
WARNING:

""

MSDV2611-O3-D0

< >

PVR File System

OSD Language English

OPTION

Audio Languages
Subtitle Languages
Country

Australia

Restore Factory Default

Check PVR File System Start

USB Disk

Format

Time Shift Size
Speed

Fre e Recor d Limit 6 H r.

Select Disk C:

In PVR File System Sub-menu you will be asked to format your USB 2.0 drive or Hard Disc for PVR
Operation. If you are not familiar with the various drive or partition options for storage devices, start this
process using a blank (ie. unused storage device), or one which does not hold sensitive or required data.

Select Disc
To view and select the USB file or the allocated space on your Hard Disc that you would like to record to,
press OK button to enter the Select Disk sub-menu and then press or buttons on your remote control
to select the particular partition/file for recording.
Press the Menu Button to return to the Main Menu.

Check PVR File System
Press the OK Button to start checking the file system of your USB storage or Hard Disk. Once SUCCESS
is shown after checking, you will then be able to begin recording or use the Time Shift function. If FAIL is
shown after checking, you then need to format your USB drive or Hard Disc before being able to record or
use Time Shift feature.

Format
When you format your USB drive or Hard Disc partition any saved data will be lost. Please ensure
that you start with a blank partition on your Hard Disc to ensure you don't lose any data.

PVR File System Type
There are two types of supported formats: FAT32 and Hi Speed Format. You can press or buttons to
choose the type of formatting. If FAT32 is selected, you will have to format the whole size of your USB
drive or the allocated partition for recording. If Hi Speed Format is selected, you will then be able to
press or buttons to select the size you wish to use (for example 1G, 10G, 20G... or All). Once a
particular size is booked for recording, you will be able to use the remaining space of your USB drive or
Hard Disc for other data storage.
WARNING: Please note no matter which size is booked for recording, all the data in the allocated partition
of the Hard Disc will be lost after formatting.

Speed
This will show the supported speed of recording, and whether your storage device can support HD DTV
recording.

Record Limit
This will show the approximate time you will be able to record on to your USB drive or Hard Disc.

the

File System Size

PVR F ile Sys tem Type FAT3 2

MENU

PVR File System Size All

SD 13 Mins

HD 3 Mins

-18-

OPERATION

5.OPTION MENU

To enter the Option Menu, press MENU button and then press or buttons to select the Option Menu.
Once in Option Menu, press or buttons to select the settings you wish to adjust. Press MENU button
to return to the Main Menu.

NOTE:
Restore Factory Default will clear all the programs and password.

OPERATION

Press the OK button to enter the basic DMP (Digital Media Player) Menu and then use the or buttons
on the remote control to select the file playback type (eg. Photo, Music, Movie, Text), then press OK.You
can preview a selected file by highlighting it using the cursor arrows and pressing OK. Press the Play
button on the Remote Control to show it in full-screen size. Press the MENU/INFO button to bring up a
controls tab at the bottom of the screen, allowing easier control of play, pause, stop and repeat modes.
Press the EXIT button repeatedly to progressively return back to the DMP menu.

PHOT O MUSIC M OVIE TEXT

6.LOCK MENU

To enter the LOCK Menu, press MENU button and then press or buttons to select the LOCK Menu.
The default password is 6666.
Please set a new password so it is easy to remember. Follow the on screen steps to set your new
password.

Set Password

Lock System

LOCK

< >

Block Program

Parental Guidance Off

7. APPLICATIONS MENU

To enter theApplications Menu, press MENU button and then press or buttons to select the
Applications Menu. This is where you will be able to view and play various low data-rate USB media files
or DTV programs recorded using your TV.

< >

APPLICATIONS

DMP

The supported formats are as below:
Photo: JPEG
Music: MP3
Movie: SmallAVI files (Not all .AVI formats are supported).
Text: TXT (eg. Windows Notepad).

Once the Parental Guidance mode is turned on, you can set viewing restrictions during DTV TV reception
based on the programs classification (eg. G, PG, M, MA etc).
NB. The viewing restrictions do not apply to the DVD player or ATV reception.

FACTORY RESET NOTE:

If you wish to reset your TV, please select the Restore Factory Default option, this will clear all settings.

-19-

OPERATION

-20-

Schedule List 04:55 28th Apr Delete

Time Date

Programme Title

Channel Name

3.
Press the Blue Button to book a DTV program for future viewing and add to the Schedule List.

Remind

802 SZTVM03

08 Minute

05 Hour

Apr Month

28 Date

Once Mode

Reminder setting

BACK

OK

_

+

8.EPG Menu (Electronic Program Guide).

The EPG Menu is used to look at what is being broadcast by DTV stations. After you turn the TV on
and select the DTV input, your TV will commence receiving EPG data progressively over a period of
time (typically up to half an hour, depending on the number of stations being received). Press the
EPG Button to access the EPG Menu. You will receive detailed program information of the channel
you are currently watching as well as programs in the near future. Press the cursor to move to the
top of the EPG screen to the Programme Guide tab, then press the cursor to select either Time or
Channel listings.

In the Time mode, move the highlighted tab down to the date line using the cursor keys, then press
the cursor keys to select the desired reception date. Use the down cursor to move thru the
available programs for the selected date and time.

In the Channel mode, use the cursor keys to select the desired DTV channel, then scroll thru the
available programs into the near future. Once the selected program is chosen you can select to tag
it for either Remider or Record activity using the Blue or Red buttons, and then view the planned
activity in the Schedule List.

2.

Press the Yellow button to list all the stored reminder schedule, press to choose the list, press red key

to delete the schedule list, Press EPG to return to EPG menu.

Schedule

DELETE

1.
Use to select a program and then press the Green Button or INFO key on the Remote to display the
highlighted program's information (if transmitted by the TV station).

INFO

4.
Press the Red button to book a DTV program for future recording and add it to the Schedule List.

Record

28 Apr

04:39

800 SZTVM01 No Information

801 SZTVM02

802 SZTVM03

803 SZTVM04

804 Date

No Information

No Information

No Information

No Information

PROGRAMME GUIDE TIME

Schedule

INFO

Remind

OK

INDEX

Record

OPERATION

9. PVR function

1). Prepare to record the program

From OPTION MENU enter into the PVR File System and choose "check PVR File System". Click "OK",
and wait until "checking" changes into "Success".
Note: please check the result marked "Speed". If it is "HD support", that means the speed of your USB
device is suitable for time shift and record functions. If not, please format the device, to make sure the USB
device is capable of handling the recording functions. The default "Free Record Limit" is 6 hours, if the
space on the disk is big enough. If the space is not big enough, the record time will be shorter, depending on
the capacity of the device. During the "check PVR File System" checking, please do not take any other
operation until it is finished.

The recordings have to be done from within the TV PVR system. The recordings can only be played in
the same TV, and generally not in any other kind of devices (computer, DVD, etc...) which are not
compatible with the .TS file format.

In order to carry out any kind of recording, the TV will oblige you to format the connected USB device
to store the recording. The High Speed format option is recommended for better HDTV recording results.

WARNING. WHENYOU FORMATTHE EXTERNAL USB DEVICE YOU WILL LOSEALL THE FILESAND
INFORMATION STORED ON THE DEVICE.

From the OPTION MENU, enter into the PVR File System as below:

Select Disk: select which disc to save the record file onto, then press OK to return to the PVR menu.

Check PVR File System: check if the PVR File System set up will work with your USB device or not.

Format: Refer to the details on formatting on before using this option for the first
time. Once you have selected the type of formatting of your USB storage device, your TV
will show various progress screens (see next page).

page 18

< >

PVR File System

OSD Language English

OPTION

Audio Languages
Subtitle Languages
Country

Australia

Restore Factory Default

MENU

Check PVR File System Start

USB Disk

Format

Time Shift Size

Speed

Fre e Recor d Limit 6 H r.

Select Disk C:

Select Disk

USB 0

Dis k C:

-21-

OPERATION

When the Format process has finishe d, you can th en run the “C heck PVR Fi le System” option to show the
speed ability of your USB storage device. Press EXIT to return to TV mode.

If you selected the "Hi Speed FS" format mode, you can then change the time shift memory size:

When viewing a DTV program, click the "record" button on the remote control and the record control tab will
pop up and the PVR will commence recording. Click the "record" button again and the record control tab will
disappear while the "REC" icon will remain on the top left of the screen. It will disappear when you click "stop",
and the PVR will finish recording.

PVR recording of DTV programs can also be accessed thru the EPG, and future recordings can be accessed
using the Schedule List option. Refer to the EPG Menu section on .

In the USB drive, the recorded program will be saved in the folder "_MSTPVR" on the device. To play back the
.TS format files, use the DMP (Digital Media Player) function as shown on , and select Movie as the
type of file to play back. Alternatively, press theAngle button repeatedly on the Remote Control to display the
Recorded List in Program, Channel or Time order.

2. The USB PVR function relies on the use of high quality USB drives, and as such may not be compatible with
some specific USB devices.

2). Recording a DTV program

3). Playing back the recording:

page 20

page 24

1. Video may become pixelated if the video bit rate is too high for the USB drive. If this occurs, try using a
faster USB drive, or re-format it using the High Speed Format option. Note:This may make the drive un­readable in other USB devices.

Warning! All data will be lost.

Start Exit

Format disk

Format disk

Do not unplug USB device.

Formatting,please wait

Format disk

MENU

Check PVR File System Checking

Fre e Recor d Limit 6 H r.

Select Disk C:

USB D isk Pas s

For mat Pas s

Time Shift Size All

Speed Checking

MENU

Check PVR File System SUCCESS

Fre e Recor d Limit 6 H r.

Select Disk C:

USB D isk Pas s

For mat Pas s

Time Shift Size All
Speed HD support 2048 KB/s

Time Shift Size

Time S hift Di sk Size 5 12 MB

SB 14 M ins

HD 4 Mi ns

-22-

OPERATION

FF Prev. NextFB

Pause

00:00:33/00:04:22

Play Stop

Record a paused DTV program to USB storage device

PAUSE

STOP

NOTE:

1. While in the DTV input source, insert USB storage device to the USB port on the side of your TV.

2. Select a DTV channel, then press to start the Time Shift function. The TV program will be
paused on screen; the Time Shift OSD appears and recording commences. Press play to playback the
time-paused material.

3. Press to stop the Time Shift function and stop recording program.

Please do not unplug the USB storage device when the Time Shift function is activated, as damage to the
recorded file or the USB storage device may occur.

Approximately 4GB of memory buffers about 30-40 minutes of DTV material.

-23-

10. Timeshift function

Prepare to record the program

NOTE:

USB Drive Storage Format

NOTE:

This TV allows you to pause and record the currently watched digital TV program to a USB storage device,
and to resume viewing at the point where it was paused.

Formatting a USB 2.0 storage device will be needed. Save the original data on your USB device before
formatting. All the data stored in the USB device will be erased after formatting.

Follow the Format instructions on of this Manual to format the USB device and allocate the
amount of space for theTime Shift function.

The format process will take at least 2 minutes depending on the capacity of your USB device. Please do
not turn off the power or remove the USB device during formatting. The High Speed format option is
recommended for better HDTV recording results.

During formatting, a speed test will be done on the USB device. If it fails, it means the USB device may
not support the Time Shift function.

page 18

OPERATION

Select the media file by pressing or , then press and the preview frame will pop up if the file
in playable. Press the play button to play the media file in full screen mode. When the media file
(Photo, Music, Movie, or Text type) is playing, press the or Info button to display the control bar at the
bottom of the screen.

OK

OK

Pause FF Prev. NextFB Stop

Repeat ALL

00:00:33/00:04:22

Set A

AB

In the control bar, press to select the function icon, then press the OK button to confirm the function.
Press or E XIT bu tto n to exit the c ontrol ba r.

-24-

OKPress the cursor buttons to select the correct disk and press to display the media files and folder
list or press EXIT to return to the media type selection menu. Once you have selected the required media
type and drive details, you can view the various files and folders on screen.

Retu rn C

1/1

Sample1.ts Sample2.ts

Return

Movies

1/1

Sample3.ts Sample4.ts

Resolution: 688x412
AudioTrack: 1/2
Sub title : 1/1
Pro gram: 1 /5
Size: 511457 KBytes

Sample1.ts

PHOT O MUSIC M OVIE TEXT

USB 2.0

Please make sure that the USB device is plugged in the slot. There are four media types that can be
selected, such as Photo, Music, Movie, and Text. Select the type of media item by pressing , press

button to enter the disk selection menu.OK

11. Digital Media Player (DMP)

To play and view low data-rate USB media files as well as DTV recordings made using this TV, use the
DMP function that is accessible from theApplications Menu. For playback of high data-rate media files
the use of an external Media Player is recommended.

-25-

DVD OPERATIONDVD OPERATION

This DVD Player has a Class 1 laser which
may be harmful to your eyes. Do not
attempt to disassemble the cabinet or make
any adjustments.
Refer all servicing to a qualified
prefessional.

Caution

DVD SIDE PANEL

USB

3 in 1 Card Reader

Caution:

In DVD mode when no disc is playing, insert
a USB drive (or an MP3 player with USB
interface) into the USB socket. Press the
DVD/USB button on the Remote Control unit,
and use the / keys to select USB mode for
playing MP3 or JPEG files.

In DVD mode when no disc is playing, insert
three kinds of card (SD ,MMC, MS). Press
DVD/USB button on the Remote control
and use the / key to select SD/MS/MMC
mode for playing MP3 or JPEG files. All the
function is the same to playing a disc.

When the disc is playing, please stop playing
first and insert a USB/CARD, enjoying
USB/CARD by press DVD/USB key on
the remote controller ,and then press /
key to select DISC/USB/CARD,and
press ENTER/OK to comfirm.

When using USB/3 in 1 Card Reader
function, please do not insert in the wrong
direction, or else it will damage the unit.

Features

Disc formats supported by this player:

Dolby Digital

32

Subtitle choices

KODAK pi ctur e CD

8

Audio choices

MP3 files on
CD-R/CD-RW

16:9

LB

TV Aspect
Ratio modes

DVD video

R

RESTRICTED

Parental Lock

This product incorporates copyright
protection technology that is protected
by method claims of certain
U.S.patents and other intellectual
property rights owned by ROVI
Corporation and other rights owners.
Use of this copyright protection
technology must be authorized by
ROVI Corporation, and is
intended for home and other limited
viewing uses only. Unless otherwise
authorized by ROVI Corporation.
Reverse engineering or disassembly is
prohibited.

The product complies with the KODAK
Picture CD format and will display
KODAK Picture CDs. The "KODAK
Picture CD Compatible" logo is a
trademark of Eastman Kodak Company
and is used with permission.

Manufactured under license from Dolby
Laboratories."Dolby" and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential Unpublished
Works. 1992-1997 Dolby Laboratories, Inc.
All rights reserved.

9

Multi-angle

OPEN/CLOSE

PLAY/PAUSE

STOP

PREV

NEXT

Disc data side

USB

Disc label sidefacing you

SD/MMC/MS

-26-

DVD OPERATION

Audio

DVD menu

MENU OPERATION

LANGUAGE SETUP

Press the SETUP button on the remote control,
the SETUP MENU will be displayed.After
accessing the setup menu, press the direction
buttons for up and down movement to select an
item desired, and press RIGHTdirection button
to select the SUBMENU item.Then press the
ENTER/OK button to confirm. Press LEFT
direction button return to the menu of upper
level. To exit the setup, press the SETUP button
again. In the SETUP MENU, you may choose
any of the following options as you like.

Select Language in the setup menu, and display
the Language submenu:

OSD Language

Subtitle

Audio

DVD Menu

VIDEO SE TUP

Video

Video

Use this item to select the language of the setup
menu and screen display.

This option provides the preset subtitle
language.

Select the built-in disc dubbing language
options.

This option provides the film's menu language
options.

Select in the setup menu, and display the

submenu:

SYSTEM SETUP

Aspect Ratio

TV System

Select the aspect ratio.

Select the different TV system.

For more information of
output format, refer to the instructions of your
TV set.

Notes:

RATING SETUP

RatingSelect in the setup menu, and

display the Rating submenu:

The image display ratio is related to the
recorded disc format. Some disc can not display
images in the aspect ratio you choose. If you
play a disc recorded in 4:3 format on a wide
screen TV, black bars will appear on the left and
right side of the screen.You must adjust the
screen setting depending on the type of the
television you have.

Note: The DVD player setting should be
matched to your TV set.

Parental Control

:

Set Pass word

ENTER

/Ok

Set the parental control feature of the player

Password is needed before setting

Parental Control.

Input four digits (password), then press

to confirm.

If you forget your password, please use

the universal password 6666 to unlock.

Note

Note:

MISC SETUP

Select in the setup menu, and
display the submenu:

MISC

Use Default Settings

Reset setup data to factory default value.

-27-

DVD OPERATION

MP3/WMA/JPEG PLAYBACK

The MP3/ WMA disc has s uch a d irec tor y
structure as shown picture above.

Press to choose the root directory
and then press ENTER/OK button to enter into
the sub directory. Press to
choose the desired track and then press

or to enjoy the music or
movie. If you want to return to the upper menu,
press to choose the icon and
press button.

Filter: Allows selecting the categories of files
displayed in the browser list.
Repeat: To switch different repeat playing mode
Mode: Select different playing mode as follows:
Normal: Shuffle mode is cancelled.
Shuffle: Shuffle mode enabled. When playback
reaches the end of the currentchapter/track,
playback jumps to a random chapter/track. As
the end of each chapter/track is reached,
another random chapter/track will be played
until all tracks/chapters have been played or the
Shuffle mode is cancelled by toggling to a
different Option.

To enable programmed playback
mode. When you select the mode, press
Direction to directory and press
to choose the desired track and press

and press and press
the to cancel the edit mode.At last
press to display program track and
press to start program playback.

Display program track.

: Display track directory.

Add to program: Choice the track press

to add the track of the program play
directory.

: In the complete stop
state(press the button twice), First press
Edit mode to enable the edit mode. Press Left
key to program track and press ENTER/OK to
cancel the desired track. press
to delete the track of the program play directory.

Direction key

Direction key

ENTER/OK PLAY

Direction key
ENTER/OK

Mode

Edit Mode:

LEFT

key ENTER/OK

Add to

program Program view

Edit mode

Left key

ENTER/OK
Program view:
Browser view

Add to

program

Clear program

STOP

Clear program

PICTURE CD PLAYBACK

The PICTURE CD disc has such a directory
structure as shown in the following picture.

Press to choose the root
directory and then press ENTER/OK
button to enter into the sub directory.
Press to choose the desired
picture and then press or

to enjoy the picture. If you want to

return to the upper menu, press

to choose the icon and press

button.

In picture play state, press
to rotate the picture.

If the player has a 3 in1 card jack and it's
NOT in “disc playing” status, you can
insert three kinds of card (MMC, SD , MS)
to play the mp3 music and JPEG files.All
the function is the same to playing a disc.

Direction key

Direction key

ENTER/OK

PLAY

Direction
key
ENTER/OK
Image rotation

Direction key

CARD READER ,USB

3 In 1 Card Reader

USB

If the player has a USB slot and it's NOT in “disc
playing” status, you can insert a USB device or a
Mp3 Player with USB Interface to play the MP3
music or and JPEG files.All the function is the
same to play a disc.

When the disc is playing, please stop playing
first and insert a USB/CARD, enjoying
USB/CARD by press

key on the remote controller ,and then
press / key to select DISC/USB/CARD,and
press ENTER/OK to confirm.
Not all USB/CARD device can be supported by
this system.

When using USB/3 in 1 Card Reader
function, please do not insert in the wrong
direction, or else it will damage the unit.

DVD/USB

Note:

-28-

DVD OPERATION

OPEN/CLOSE

SUBTITLE

GOTO

0-9 keys

MENU

PBC

SETUP

RETURN

To open the disc tray, press
OPEN/CLOSE; To close the disc tray,
press OPEN/CLOSE again.

Press the button to choose different
captions(Requires support from disc)

For DVD discs, press the button to
choose the desired title and chapter
andsearch the desired title time and
chapter time.For Super VCD,VCD,CD
discs, press this button to search the
desired disc time and track time and
choose the desired track.
Note: During VCD playback, the PBC
mode must be set to OFF.

These keys are used to input the
time, as well as title, chapter and
track numbers.When a numeric item
is displayed on the screen, press the
0-9 keys to select the desired entry,
and press ENTER/OK to confirm.
When a VCD is playing(with PBC off),
press the 0-9 keys to select a track
directly.

During DVD playback, press MENU to
display the disc menu of the current
title.

During VCD/SVCD playback, press
PBC to control PBC ON/OFF.

Press the button to enter the system
setting menu. Press the button again
to exit the menu.

When DVD/SVCD/VCD displaying,
press R ETURN butt on to the
menu(PBC ON only).

Function Buttons

DISPLAY

ENTER/OK

REV:

FWD

PREV

PREV

NEXT

NEXT

STOP

Play/Pause

ANGLE

ANGLE

Press t he button to s how the
information of the current playing
disc.

Press the button to confirm your
choice on screen.

During DVD, CD Mp3 or VCD
playback, press REV to scan in
reverse.
The player will review the disc at
different times speed. Press
PLAY/PAUSE
to resume normal playback.

During DVD, CD,MP3, or VCD
playback, press FWD to scan
forward.The player will cue the disc
at different speed. Press
PLAY/PAUSE to resume normal
playback.

During DVD, CD,MP3, or VCD
playback, press to play the
previous chapter, title or track.

During DVD,CD,MP3, or VCD
playback, press toplay the next
chapter, title or track.

Press the button once and the player
will be in memory stop state.
Continuously press this button twice
and the player will be in complete
stop state.

In pause state or stop state, press the
button, the player will be in playing
state.In play state, press the button
the player will be in pause state.

Press the button to view scenes shot
from DIFFERENCE
ANGLES.
(Disc support is required)

-29-

DVD Trouble shooting

Ensure you have set the player s AUDIO
settings correctly.

If you have any questions, please consult the troubleshooting guide below:

NO PICTURE OR SOUND

Ensure the power button is on.

Ensure the power outlet is operational.

Ensure the power cord is not damaged.

Ensure the power plug is connected

firmly to the outlet.

PICTURE BUT NO SOUND

Ensure the audio is not set to mute.

POOR PICTURE OR SOUND

Ensure you have set the player s AUDIO
settings correctly

Ensure the disc is not scratched or
stained.

“”BAD DISC DISPLAYED

Ensure the disc is not warped,
damaged or deformed.

Ensure the disc is not badly stained or
damaged.
Ensure the disc format is compatible
with the player.

Please check whether you have tried to
play a software CD. If so, please restart
the player.

REMOTE NOT WORKING

Make sure the Main unit s POWER button is on

Ensure the remote batteries are working.

Point the remote control directly at the player s

IRsensor.

Remove any obstacles between the remote

and theIR sensor.

UNIT NOT WORKING

Turn off the power, and then turn it on

again.

“”NO DISC DISPLAYED

Ensure you have put the disc on the tray.

Ensure the disc is not upside down.

Ensure the disc is not distorted, stained or

scratched.

,

-30-

TROUBLE SHOOTING

Picture Audio

Snow Noise

antenna position, direction
or connection

Inspection Check

Interference

Noise

electronic equipment, car/
motorcycle, fluorescent light

Normal Picture

Mute

Volume (check if mute is
activated or if the audio system
connections are not correct)

No picture Mute

Mains Power cord is not inserted
Mains Power switch is not
activated
Contrast and brightness/volume
setup
Press Power/Stand-by key on the
remote control

No colour Normal audio Colour control

Picture
breaking up

Normal audio

or weak

retune channel

No colour

Noise

TV system

Normal audio

antenna position, direction
or connection

Trouble phenomenon Symptom

Ghost

Mosaic

Unnormal

Antenna Loose

Please press the main power switch at the rear or bottom of the TV before
attempting to turn on the TV via the Standby button or the Remote Control.

INTRODUCTION

-31-

Power consumption

VGA Input (15 pin D-type)

Rear HDMI

Inputs

Rear Composite Video Input (RCA)

Rear

Audio Input (RCA sockets)

Side Composite Video Input (RCA)

Side USB (media play, HDTV record/play) i

nput

Rear Composite Video Output (RCA)

Audio Output

(RCA sockets)

1
2

1

(L+R)

2 (L+R)

1
1

(L+R)

1
1

1

(L+R)

Terminals:

Input Power Voltage

100V-240V~ 50/60Hz

80W

2x3W

Others:

Audio Output Power THD 7%

)

Y PbPr (Component video) Input

)

Viewing Picture Size(diagonal)

Resolution

Aspect Ratio

Digital TV: DVB-T
Analog TV: PAL

26"(66cm)

1366x768

16:9

LCD :

Display colours

Brightness

Contrast ratio

Response time

View angle

16.7M

450 cd/m

800:1

5 ms

160 (H)/150 (V)

TV:

DVB-T decode

DVB-T de-modulation

Audio: MPEG2Audio Layer I&II
Video: MPEG2 Transport MP@HL

Demodulator : COFDM
OFDM Mod.: 2K, 8K FFT, SFN and MFN
Packed Carries: 2K/8K
Guard Interval: 1/4, 1/8, 1/16, 1/32

TV system

2

Dimensions (approx):

660 x x mm (W.H.D) with stand fitted500 215