AWA MSDV1911-O3-D0 User Manual

MSDV1911-O3-D0
19" 47cm LCD Television with
Built in DVD Player
USER MANUAL
Thank you for purchasing this LCD TV. Before connection and operation of this
product please read the manual carefully and completely.
Please keep this manual for future reference.
Version 1.0
Contents
-1-
INTRODUCTION..............................................................................1
SAFETY AND WARNINGS.............................................................2-4
WALL MOUNTING INSTALLATION GUIDLINES................................. 5
INSTALLATION.......................................................................... 6 -11
REMOTE CONTROL.................................................................12-13
OPERATION.............................................................................14-18
DVD OPERATION......................................................................19-22
DVD TROUBLE SHOOTING............................................................ 23
TROUBLE SHOOTING....................................................................24
TECHNICAL SPECIFICATIONS.......................................................25
-2-
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.
The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WARNING:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in accordance with the instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Unplug this apparatus during lightning storms or when unused for long periods of time.
12) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
13) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
14) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.
15) No naked flame sources, such as lighted candles, should be placed on the apparatus.
16) This device is not warranted for use in unreasonably hot, cold, or humid
environments.
17) The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.
The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING:
-3-
High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.
Do not trap the power supply cord under the television receiver.
Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.
Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it falls.
When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television.
If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.
Dim:515*320mm(
SAFETY AND WARNINGS
-4-
CAUTION
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lightning, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel.
Warning: Change or modifications to this unit not expressly by the part responsible for compliance could void the user 's authority to operate the Equipment.
a. Do not expose to dripping or splashing. b. No objects filled with liquids, such as vases, shall be placed on the apparatus. c. The mains plug of this device is used as the disconnect device and shall remain readily accessible and operable. d. No naked flame sources, such as lighted candles, should be placed on the apparatus. e. Allow suitable distances around the apparatus for sufficient ventilation. Ventilation should not be impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and such like.
The display panel is a very sensitive and high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of black, blue, green or red. Please note that this does not affect the performance of your product.
About After- Image The extended use of fixed image programme material can cause a permanent after - image on the screen. This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible screen deterioration can be limited by: A. Reduce the brightness/contrast setting to a minimum viewing level. B. Do not display the fixed image for extended periods of time. C. Turn the power off when not in actual use.
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays. Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the screen.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
CAUTIONS: The permanent after-image on the screen resulting from fixed image use is not an operating defect and as such is not covered by the warranty. This product is not designed to display fixed images for extended periods of time.
SAFETY AND WARNINGS
-5-
For wall mounting with the optional bracket, please read the following instruction and the bracket instruction. Make sure qualified service personnel perform the operation. AWA bears no responsibility for improper mounting that results in accident or injury.
Wall Mounting Holes Spacing and Location
Base Stand Disassemble Illustration
How to remove the stand from the TV (The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the unit at any time because the screen could crack.)
1.Use the screwdriver to remove 3 screws from the screw location.
2.Remove the base stand from the Main body.
4 Wall mount M4 Screws
INSTALLATION
100 mm
100 mm
FRONT PANEL
AC Power Cord.........................1
Infrared Remote Control............1
User's M anual ........................ 1
Battery (AAA).......................... 2
ACCESSORIES
INSTALLATION
-6-
1: Remote control sensor.
2: Indicator LED: GREEN POWER ON.
RED STANDBY.
3: Key board (on side of TV)
3
1 2 3
4 5 6
7 8 9 0
+
CH
_+_
VOL
30 30
1
2
Stand mounting screws.........................3
Wall mounting M4 screws......................4
INSTALLATION
KEY BOARD
REAR PANEL
-7-
100-240V~ 50/60Hz
AC-INPUT
HDMI INPUT
VGA INPUT
RF INPUT
AUDIO INPUT
PC
AV
L
R
AV OUTPUT
All the terminals are (from left to right): AC Power input, Antenna socket, VGA input, AV output , PC Audio input, Audio input, YPbPr , AV composite video input, HDMI input.
(composite video and audio)
(component video) input
1 SOURCE Display the input source menu.
CH+ or CH- to
select items.
press VOL+
or VOL- to
STANDBY
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
6. USB The USB memory stick should be plugged into the unit directly. USB extension cables should not be used to avoid failing of data transferring and interference caused.
To access or play the files on your USB memory stick using this USB socket on your TV, please refer to use of the Applications Menu on page 17 of this manual.
2 MENU Display main MENU. 3 CH+/CH-
In TV mode press CH+ or CH- to change the channel up and down. In MENU mode, press
4 VOL+/VOL-
Adjust sound level. In MENU mode,
adjust the item that you selected.
5.
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
USB
Note: 1. AV and YPbPr inputs share the Rear Audio input channel.
2. When the HDMI port receives a DVI signal, the matching audio signal is received by the PC Audio input.
Loading...
+ 19 hidden pages