AWA MHDV3720-O3 User Manual

USER MANUAL

Thank you for purchasing this LCD TV. Before connection and operation of this

product please read the manual carefully and completely.

Please keep this manual for future reference.

N294

MHDV3720-O3

37" 94cm Full HD LCD Television

Version 1.0

Contents

-2-

INTRODUCTION..............................................................................1

SAFETY AND WARNINGS.............................................................3-5

BASE STAND ......................................... 6

INSTALLATION........................................................................... 8-11

REMOTE CONTROL.................................................................12-13

OPERATION.............................................................................14-18

TROUBLE SHOOTING...................................................................19

TECHNICAL SPECIFICATIONS...................................................... 20

ASSEMBLY INSTRUCTION

WALL MOUNTING INSTALLATION GUIDELINES............................... 7

-3-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

CAUTION

This symbol indicates that dangerous
voltages, constituting a risk of electric
shock are present within this unit.

This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.

To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings,
install in accordance with the instructions.

8) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.

9) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

10) Only use attachments/accessories
specified by the manufacturer.

11) Unplug this apparatus during lightning
storms or when unused for long periods of
time.

12) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

13) Mains plug is used as the disconnect
device, the disconnect device shall remain
readily operable.

14) The ventilation should not be impeded
by covering the ventilation openings with
items, such as newspapers, table-cloth,
curtains, etc.

15) No naked flame sources, such as
lighted candles, should be placed on the
apparatus.

16) This device is not warranted for use in
unreasonably hot, cold, or humid

environments.

17) The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, shall be placed
on the apparatus.

This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only
identical replacement parts.

The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.

WARNING:

-4-

High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set.
Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not
expose the television receiver to rain or moisture.

Do not drop or push objects into the television
cabinet slots or openings. Never spill any kind
of liquid on the television receiver.

Do not block the ventilation holes in the back
cover.
Adequate ventilation is essential to prevent
failure of electrical components.

Do not trap the power supply cord under the
television receiver.

Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if it
falls.

Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an individual,
and damage to the television may result if it falls.

When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.

If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.

Dim:515*320mm(

SAFETY AND WARNINGS

-5-

SAFETY AND WARNINGS

CAUTION

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in
this manual.
All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD
PANEL or CABINET, the power cord should be physically removed from the mains outlet. You may
then wipe the TV with a dry soft cloth. During thunder and lightning, unplug the power cord and
antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by
qualified TV service personnel.

Warning: Change or modifications to this unit not expressly by the part responsible for compliance
could void the user 's authority to operate the Equipment.

a. Do not expose to dripping or splashing.
b. No objects filled with liquids, such as vases, shall be placed on the apparatus.
c. The mains plug of this device is used as the disconnect device and shall remain readily accessible
and operable.
d. No naked flame sources, such as lighted candles, should be placed on the apparatus.
e. Allow suitable distances around the apparatus for sufficient ventilation. Ventilation should not be
impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and
such like.

The display panel is a very sensitive high technology product, giving you finely detailed pictures.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of black, blue,
green or red. Please note that this does not affect the performance of your product.

About After- Image
The extended use of fixed image programme material can cause a permanent after - image on
the screen.
This background image is viewable on normal programs in the form of a stationary fixed image.
This type of irreversible screen deterioration can be limited by:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.

Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed
Image Displays.
Do not allow a still picture to be displayed for an extended period, as this can cause a
permanent after-image to remain on the screen.

Examples of still pictures include logos, video games, computer images, teletext and images
displayed in 4:3 mode.

CAUTION:
The permanent after-image on the screen resulting from fixed image use is not an operating
defect and as such is not covered by the warranty.
This product is not designed to display fixed images for extended periods of time.

-6-

This STAND INSTALLATION GUIDE is provided to help you easily install the stand. Please carefully follow
Step 1 through Step 3.

STAND INSTALLATION GUIDE

Open the box and find the parts

Open the box and find the following parts.

- Stand x1 pc

- Screws x 4 pcs

Packing

Stand

Packing

TV

Screws

Stand

Place the Stand on the TV

1. Place the TV with the display side down
on a table or desk (flat, totally clean surface).
Use a cloth or soft towel between the face of
the TV and the table to protect the TV's screen.

2. Place the Stand on the TV as shown below.
Align the holes in the stand with the holes in
the TV.

Stand

Secure the Stand to the TV

Secure the Stand to the TV by using the 4 supplied screws.

1 2

43

For wall mounting with an optional bracket, please read the following instruction and the
bracket's instructions. Make sure qualified service personnel perform the operation.
AWA bears no responsibility for improper mounting that results in accident or injury.

Wall Mounting Holes Spacing and Locations

Base Stand Disassembly Instructions

How to remove the stand from the TV
(The LCD Display is very fragile, and must be protected at all times when removing the
base stand. Be sure that no hard or sharp object, or anything that could scratch or
damage the LCD display, comes into contact with it. DO NOT exert pressure on the front
of the unit at any time because the screen could crack.)

1.Use the screwdriver to remove 4 screws from the screw location.

2.Remove the base stand from the Main body, and store it and the screws somewhere safe
for future use.

-7-

INSTALLATION

400 mm

200 mm

1) Remove the base stand by following
the instructions below.

2) Use the four M4 screws provided to
fix the TV onto a suitably strong wall
mounting bracket (not included).
The M4 screws are tightened into the
four VESA-standard holes on the back
of the television.

INSTALLATION

-8-

Front panel

KEYBOARD

SOURCE

MENU

CH+

CH-

VOL+

VOL-

STANDBY

1: Remote control sensor.
2: Indicator LED:
BLUE = POWER ON.
RED = STANDBY.
3: Key board (on side of TV).

4: Main power switch (on bottom rear of TV)

The remote control needs to be pointed directly,
within +/- 30 , of the sensor on the front of the
TV for reliable operation.

30 30

1

3

2
4

1. SOURCE:
Displays the input source Menu.

2. MENU:
Displays the main MENU.

3. CH+/CH-

In TV mode, press "CH+" or "CH-" to change the channel up and down.
In MENU mode, press "CH+" or "CH-" to select items.

4. VOL+/VOL-

Adjusts the sound level.
In MENU mode, press "VOL+" or "VOL-" to adjust the item that you have selected.

5. STANDBY
Once the TV's main power switch has been activated, press this button to turn the

unit ON from STANDBY mode.
Press it again to return the set back to STANDBY.

INSTALLATION

-9-

STEPS:

PC

Be sure both the TV and computer are
set to Power off.

1.Connect a VGA and audio cable.

2.Connect the power cord.

3.Power on the TV, switch to PC mode.

4.Power on the PC.
This connection and power-up sequence
is very important.

ANTENNA

Note:
Aerial connections: IEC (female).
Input impedance: 75 unbalanced.

REAR AV Connections

All the terminals are (from left to right):
AC Power input, Antenna socket, VGA input, AV output, PC AUDIO input, Rear Audio input,
YPbPr , AV1 input, HDMI1 input, HDMI2 input.

Note: 1. AV1 and YPbPr share the Rear Audio input channel.

2. When HDMI1 port receives a DVI signal, the matching audio signal is received by
the PC Audio input.

(component video) input

Plug (not supplied)

Outdoor antenna (not supplied)

For optimum digital TV reception,
the use of high quality shielded 75
coax cable is recommended.

RF INPUT

VGA INPUT

AV

L

R

AV OUTPUT

PC

AUDIO INPUT

HDMI2 INPUT

HDMI1 INPUT

100-240V~ 50/60Hz

AC-INPUT

RF INPUT

VGA INPUT

AV

L

R

AV OUTPUT

PC

AUDIO INPUT

HDMI2 INPUT

HDMI1 INPUT

100-240V~ 50/60Hz

AC-INPUT

VGA and audio cable

not supplied

-10-

INSTALLATION

PRESET MODE

PC

1

2

3

4

5

6

7

720*400

640*480

800*600

800*600

800*600

1024*768

1024*768

70

60

56

60

72

60

70

31.47

31.47

35.156

37.88

48.08

48.36

56.48

RESOLUTION V.Freq.(Hz) H.Freq.(kHz)

INSTALLATION

-11-

CONNECTING TO AV EQUIPMENT

Your TV can be connected to the following appliances: VCR,
multi disc player, DVD, camcorder, video game or stereo

system, etc.....

YPbPr can support these video formats:
480i,576i,480p,576p,720p,1080i.

Side panel inputs:
The side panel inputs provide one composite video input,
and one pair (stereo) of Audio inputs.

(component video)

This TV provides two group of AV, one group of YPbPr (component video) inputs for convenient
connection to VCR, DVD or other video equipment. Please refer to the owner's manual of the
equipment to be connected as well.

You can use the input terminals on TV set rear as follows.

W

R

G

B

R

G

B

R

Yellow (video)

White(audio L)

Red(audio R or Pr)

Y

W

R

Blue(Pb)

Green(Y)

B

G

HDMI

VIDEO EQUIPMENT with YPbPr (component) output

W

R

W

R

W R

TO AUDIO INPUTS

VIDEO EQUIPMENT

TO VIDEO
INPUTS

Y

To audio outputs

VIDEO EQUIPMENT with
Composite output

TO VIDEO output

W R

W R

Y

RF INPUT

VGA INPUT

AV

L

R

AV OUTPUT

PC

AUDIO INPUT

HDMI2 INPUT

HDMI1 INPUT

100-240V~ 50/60Hz

AC-INPUT

USB

VIDEO

L

R

AV2

Y

Y

TV Rear Panel

TV Side Panel

-12-

REMOTE CONTROL

1OK2 3

4 5 6

7 8 9 0

+

CH

_

+

_

VOL

POWER

MUTE

AUDIO

RECALL

TV MENU SOURCE

CH.LIST

SOUND

EXIT

PIC

SLEEP ASPECT

TEXTTV/RADIOFREEZE

INFOFAVEPG

REVEAL

HOLD

LIST

INDEX

SUBPAGE SIZE MIX SUBTITLE

REP

25

14

15

20

18

16

13

17

19

21

23

24

22

8

2

3

4

5

7

12

1

6

9

10

11

26

27

28

29

30

31

32

33

1:POWER:Press to turn the unit on or off.
2:NUMERIC KEY:Press for direct access to channels.
3:TV MENU:Press to display TV Main Menu.
4:CURSOR:Press to scroll through the Menu.
5:CH.LIST:Press to display the channel list.
6:VOL+/- :Press to adjust the sound level.
7:PIC:Press to switch between picture modes.
8:SLEEP:Press to set Sleep Timer.
9:FREEZE :Press to freeze the picture you are
watching.
10:EPG:Press to display the Electronic Program Guide
for information on the show you are watching and what's
on next in DTV mode.
11: FAV:Press to access your favourite channels list
in ATV or DTV mode
12:TELETEXT KEYS:Refer to next page.
13:MUTE:Press to disable or enable the sound output.
14: AUDIO:Press to change the available audio
/language for the program you are watching.
15: RECALL:Press to return to the previously viewed
channel.
16: SOURCE:Press to display the Input Source List.
17: OK:Press to confirm Menu selections.
18: EXIT:To exit the main menu, press the Exit Button
or to cancel setting selections.
19: SOUND:Press to switch between the sound modes.
20: CH+/CH-:Press to scroll through your Channel List.
21: ASPECT:Press to change the picture aspect ratio.
22:TV/RADIO:Press to switch between TV and Radio
modes.
23: TEXT:Press to enter or exit TELETEXT mode.
24: INFO:To display the program information of the
show you are watching, press the Info Button.
25: SUBTITLE:To turn on Subtitles press the Subtitle
Button in DTV mode.

26: SKIP FORWARD:Press to skip to the next file or
track in USB Mode.
27: SKIP BACKWARD:Press to skip to the previous
file or track in USB Mode
28: REP:
29: STOP:Press to Stop play in USB Mode.
30: REWIND:Fast Reverse Search in USB Mode.
31: FAST FORWARD:Fast Forward search in USB mode.
32:PLAY:Press in USB Mode to begin or continue
playback.
33: PAUSE:Press in USB Playback Mode to pause
playback.

In USB mode, select Repeat mode.

REMOTE CONTROL

ATV = Analogue TV DTV = Digital TV

-13-

REMOTE CONTROL

TELETEXT

T

EXT

SELECTING A PAGE

DIRECT ACCESS
TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press:

You will obtain :

LIST

Enter the number of the page required using the 0 to 9 up/down.
Example: page 120, enter 120. The number is displayed top left, the
counter turns and then the page is displayed. Repeat this operation to
view another page. If the counter continues to search, this means
that the page is not transmitted. Select another number.

Coloured buttons correspond to the colours at the bottom of the
screen. The 4 coloured keys are used to access the items or
corresponding pages. The coloured areas flash when the item or the
page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume sub­page acquisition. The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

The user can set four favourite pages to be directly linked to the four
color keys. While list mode is activated, it is not possibility to use TOP
or FLOF navigation with the colourkeys. The favourite page numbers
should be stored and restored to/from nonvolatile memory for each
channel by the system software.

This is used to call or exit teletext modes. The summary appears with
a list of items that can be accessed. Each item has a corresponding
3 digit page number. If the channel selected does not broadcast
teletext, the indication 100 will be displayed and the screen will
remain blank (in this case, exit teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be
consulted like a newspaper. It also offers access to subtitles for viewers with hearing
problems or who are not familiar with the transmission language (cable networks,
satellite channels, etc.)

-14-

OPERATION

Installation Guide

Press to select country at first, then press the OK button to start auto tuning.

This screen only appears when the TV is turned on for the first time, or reset to factory settings.You can choose
language, country and auto tuning programs. After tuning, the screen will skip to the first DTV program.

1.CHANNEL MENU

The first item of the MENU is channel menu (for ATV or DTV source only). ATV = Analogue TV, DTV = Digital TV.

You can search channels and edit programs here.

1).Auto tuning:

Search all the channels automatically (you can select ATV and DTV)

ATV Manual Tuning
Programme Edit
Signal Information

< >< >

CHANNEL

Auto Tuning

DTV Manual Tuning

Software Update(USB)

Software Update(OAD)Off

Dansk

Deutsch

Hrvatski

Italiano

Please select an OSD Language

OK

Magyar

Nederlands

Norsk

PolskiEnglish

Cesky

E k

Espanol

~

Fran ais

Portugues

Pycck

Austria

Belgium

Country

OK

Australia

Croatia Finland Greece

Luxembourg

Czech France Hungary

Netherlands

Bulgaria Denmark Germany Italy

Tune Type DTV+ATV

MENU

Austria

Belgium

Australia

Croatia

Czech

Bulgaria

Finland

France

Denmark

NOTE:

All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type is DTV+ATV.
Any previously stored channels will be deleted after auto tuning is carried out.

After auto tuning, the receiver will skip to the first DTV channel.

Channel Tuning

TV : 0 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)

96% UHF CH 68 DTV

2).DTV Manual tuning:
You can select a DTV channel then find the program in this channel.

Press to select the channel, then press OK to search the programs .

OPERATION

NOTE:
The Bad Normal Good bar graph on this screen shows signal intensity.

3). ATV Manual tuning :

You can change the sound system, search the analog TV channels and fine tune them, then store the
channels you selected.

ATV Manual Tuning

Storage To 1

System BG

Current CH 1

Search

Fine-Tune

Frequency 255.25 MHz

Save MENU

__

++

DTV Manual Tuning

VHF CH 5

__

++

Bad Nomal

Good

Press OK to search

NOTE:

Press the teletext red button on the remote control to store the channels after manual tuning.

4). Program edit:
You can Delete, Rename, Move, Skip, or FAV any programs.

-15-

Rename:

You can only rename ATV programs.
Move the cursor to the program, press the teletext green button to rename the program.
Press to choose the character. Press to move the cursor .
Press MENU button to exit edit, Press EXIT to exit the menu.
Note: ATV program names can only be 5 characters long, DTV program names can be up to 25 characters.

Press to choose the program, press the teletext blue button to skip this program, the symbol will
show on the right side of the program.
Choose the skipped program, press the blue button again, you can cancel the skip and the symbol will
disappear.

Delete

Press t he teletext red button, the program in the cursor will be deleted.

-16-

OPERATION

Favourite

Press to choose the program, press the FAV button and it will show on the right side of the program.
Choose the FAV program, press FAV button again, you can cancel the FAV and will disappear .

Once your favorite group is created, you can press the FAV key to quickly access your favourite channel.

The second item of the MENU is PICTURE MENU.You can adjust picture effects here, such as contrast,
brightness, etc.
Press to move, press OK to adjust.

2. PICTURE MENU

Color Temperature

Aspect Ratio

Noise Reduction
Screen

Picture Mode Standard

< >< >

PICTURE

MENU

Picture Mode Standard

Contrast 50

Brightness 50

Color 50

Sharpness 50

Tint 50

Color Temperature Medium

Red 50

Green 50

Blue 30

MENU

NOTE:

1).Tint is available in NTSC system only.

2).There are four color temperature modes that can be selected: medium, warm, cool, user.

3).The Screen op ti on is only available in PC mode, which allows you to adjust Horizontal position, vertical
position, size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND MENU.
You can adjust the sound effect here such as treble, bass, balance etc.
Press to move, press OK to adjust.

< >< >

Balance

Auto Volume

Sound Mode Standard

SOUND

Note:

Auto volume: only available when the input signal volume is too large or there is distortion.

4.TIME MENU

The fourth item of the menu is the TIME MENU You can adjust the clock, power on/off time, sleep time etc
Press to move, press OK to adjust.

NOTE:

If within 15 minutes there is no signal, the TV will auto sleep, if Auto Sleep is set ON. The clock time can be
set from the DTV system.

Off Time
On Time
Sleep Timer

Auto Sleep
Time Zone

Clock -- -- -- --

TIME

< >< >

-17-

OPERATION

5.OPTION MENU

To enter the Option Menu, press MENU button and the press or buttons to select the Option Menu.
Once in Option Menu, press or buttons to select the settings you wish to adjust. Press MENU button
to return to the Main Menu.

< >< >

OSD Language English

OPTION

Audio Languages
Subtitle Languages
Country Australia
Restore Factory Default

NOTE:
Restore Factory Default will clear all the programs and password.

Press the OK button to enter the DMP Menu.

PHOTO MUSIC MOVIE TEXT

6.LOCK MENU

To enter the LOCK Menu, press MENU button and then press or buttons to select the LOCK Menu.
The default password is 6666.
Please set a new password so it is easy to remember. Follow the on screen steps to set.

Set Password

Lock System

LOCK

< >< >

Block Program

Parental Guidance Off

7. APPLICATIONS MENU

To enter the Applications Menu, press MENU button and then press or buttons to select the
Applications Menu. This is where you will be able to view and play various low bit - rate USB files.

< >< >

APPLICATIONS

DMP

The supported formats are as below:
Photo: JPEG
Music: MP3, WMA
Movie: MP4
Text: TXT

OPERATION

-18-

Schedule List 04:55 28th Apr Delete

Time Date

Programme Title

Channel Name

3.
Press the Blue Button to book a program for future viewing and add to the schedule list.

Remind

802 SZTVM03

08 Minute

05 Hour

Apr Month

28 Date

Once Mode

Reminder setting

BACK

OK

__

++

8.EPG Menu (Electronic Program Guide).

The EPG Menu is used to look at what is being broadcasted in DTV or Radio modes. Press the EPG
Button to access the EPG Menu. You will receive detailed program information of the channel you
are currently watching as well as programs in the near future.

28 Apr 04:39

800 SZTVM01 No Information

801 SZTVM02

802 SZTVM03

803 SZTVM04

804 Date

No Information

No Information

No Information

No Information

PROGRAMME GUIDE TIME

ScheduleINFO

Remind

OK

INDEX

2.

Press the teletext yellow key to list all the reminder schedule, press to choose the list, press red key
to delete the schedule list, Press EPG to return to EPG menu.

Schedule

DELETE

1.
Use to select a program and then press the Green Button or INFO key on the Remote to display the
highlighted program's information.

INFO

Sample1.ts

Resolution: 720x576

Subtitle: 1/1

Size: 30574 KBytes

Close

AudioTrack: 1/2 ½

Program: 1/1

-19-

TROUBLE SHOOTING

Picture Audio

Snow Noise

antenna position, direction
or connection

Inspection Check

Interference

Noise

electronic equipment, car/
motorcycle, fluorescent light

Normal Picture

Mute

Volume (check if mute is
activated or if the audio system
connections are not correct)

No picture Mute

Power cord is not inserted
Power switch is not activated
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting

No colour Normal audio Colour control

Picture
breaking up

Normal audio
or weak

retune channel

No colour

Noise

TV system

Normal audio

antenna position, direction
or connection

Trouble phenomenon Symptom

Ghost

Mosaic

Unnormal

Antenna Loose

Please press the main power switch at the rear or bottom of the TV before
attempting to turn on the TV via the Standby button or the Remote Control.

SPECIFICATIONS

-20-

Resolution

Aspect Ratio

37" (94cm)

1920x1080

16:9

HDMI Input

Composite Video Input

USB Input

1

2

Composite Video Output

1

2

1

1

1

LCD :

Display colours

Brightness

Contrast ratio

Response time

View angle

16.7M

450 cd/m

4000:1

6.5 ms

TV:

DVB-T decode

DVB-T de-modulation

Terminals:

Others:

TV system

Y PbPr (Component video) Input

2

VGA Input
Audio Input

178(H)/178(V)

Digital TV: DVB-T
Analog TV: PAL/SECAM

Audio: MPEG2 Audio Layer I&II
Video: MPEG2 Transport MP@HL

Demodulator : COFDM
OFDM Mod.: 2K, 8K FFT, SFN and MFN
Packed Carriers: 2K/8K
Guard Interval: 1/4, 1/8, 1/16, 1/32

Viewing Picture Size (diagonal)

Power consumption

100V-240V~ 50/60Hz

170W

2x8W

Input Power Voltage

Audio Output Power (THD 7%)

PC Audio Input

1

Audio Output

1