AWA MHDV3703-F4 User's Manual

Download

Page 1

MHDV3703-F4

37" (94cm) FULL HD LCD Television

USER MANUAL

Please read this User Manual carefully to ensure use of this product and keep this

manual for future reference

N294

Page 2

Page 3

CONTENTS

SAFETY INSTRUCTIONS.................................................................................................2

INSTALLATION................................................................................................................3

Wall Mounting Installation Guidelines................................................................................4

ACCESSORIES................................................................................................................5

FRONT PANEL.................................................................................................................5

KEY BOARD(RIGHT SIDE)..............................................................................................5

REAR PANEL...................................................................................................................5

ANTENNA CONNECTION................................................................................................6

CONNECTING TO PC.......................................................................................................7

PC PRESET.......................................................................................................................7

CONNECTING TO AV EQUIPMENT..................................................................................8

REMOTE CONTROL................................................................ ........................................9

BATTERY INSTALLATION..............................................................................................9

KEYS FUNCTION............................................................................................................9

OPERATION..................................................................................................................... 10

BASIC OPERATION.........................................................................................................1 0

TELETEXT.......................................................................................................................11

EPG..................................................................................................................................12

MENU OPERATION......................................................................................................... 12

TROUBLESHOOTINGS....................................................................................................15

TECHNICAL SPECIFICATION........................................................................................ 16

-1-

Page 4

IMPORTANT SAFETY INSTRUCTION

1.Read these safety instructions.

2.Keep these safety instructions.

3.Heed all warnings.

4.Follow all safety instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8.Do not install near any heat sources such as radiators , stoves, or other apparatus (including amplifiers)that produce heat.

9.Protect the power cord from being walked on or pinched particularly at power outlets, and the point where they exit from the apparatus.

10.Only use attachments/accessories specified by the manufacturer.

11.Unplug this apparatus during lightning storms or when unused for long periods of time.

12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally, or has been dropped.

13.Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

SAFETY INSTRUCTIONS

INSTALLATION

Locate the TV in the room where light does not strike the screen .

directly Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation. Avoid extremely warm locations to prevent possible damage to the cabinet or premature component failure. This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other power supply. Do not cover the ventilation openings when using the TV.

CAUTION

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel.

Warning: Change or modifications to this unit not expressly by the part responsible for compliance could void the user 's authority to operate the Equipment.

a. Do not expose to dripping or splashing. b. No objects filled with liquids, such as vases, shall be placed on the apparatus. c. The mains plug of this device is used as the disconnect device and shall remain readily accessible and operable. d. No naked flame sources, such as lighted candles, should be placed on the apparatus. e. Allow suitable distances around the apparatus for sufficient ventilation. Ventilation should not be impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and such like.

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING:

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this manual carefully and keep it handy for easy reference.

This symbol indicates that this productincorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or cords.

The display panel is a very sensitive and high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of black, blue, green or red. Please note that this does not affect the performance of your product. These pixels shall not be regarded as a failure.

-2-

Page 5

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

INSTALLATION

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it falls.

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television.

Do not trap the power supply cord under the television receiver.

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

Dim:515*320mm(

-3-

Page 6

INSTALLATION

For wall mounting with the optional bracket, please read the following instruction and the bracket instruction. Make sure qualified service personnel perform the operation. AWA bears no responsibility for improper mounting that results in accident or injury.

Wall Mounting Holes Spacing and Location

400 mm

200 mm

4 Wall mount M8 Screws

Base Stand Disassemble Illustration

How to remove the stand from the TV (The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the unit at any time because the screen could crack.)

1.Use the screwdriver to remove 8 screws from the screw location.

2.Remove the base stand from the Main body.

-4-

Page 7

INSTALLATION

ACCESSORIES

AC Power Cord.........................

Infrared Remote Control............

User s M anual ........................

Battery(AAA)........................... 2

Front panel

30 30

1: Remote control sensor.

1 2 3

4 5 6

7 8 9 0

2: Indicator LED: GREEN POWER ON.

VOL

_+_

RED STANDBY.

3: Key board

4: Power: Press this button to turn the unit

ON from STANDBY mode.

Press it again to turn the set back to

STANDBY.

5: ON/OFF Switch: Press this button to turn

ON/OFF TV.

6: Side AV/S-Video/Headphone.

KEYBOARD

1 1

5 4

2 1

1 SOURCE Display the input source menu. 2 MENU Display main MENU. 3 CH+/CH-

In TV mode press CH+ or CH- to change the channel up and down. In MENU mode, press items . In standby mode, turn on the TV.

4 VOL+/VOL-

Adjust sound level. In MENU mode,

adjust the item that you selected.

SOURCE

CH+

CH-

VOL+

VOL-

CH+ or CH- to select

press CH+ or CH- to

press VOL+ or VOL- to

REAR AV Connection

Pr L

AC INPUT 100-240V~50/60Hz

Note:

1.AV1 and YPbPr share one audio channel.

2.When HDMI1/HDMI2 port get DVI signal, the PC Audio channel will change to receive the audio from HDMI1/HDMI2 port

3.AV OUTPUT : When the source are AV1,AV2(side) ,S-VIDEO(side),ATV,the AV OUTPUT Channel reproduce the input signals accordingly

4.Coaxial: SPDIF out in DTV mode.

HDMI 2 INPUT

HDMI 1 INPUT

VGA INPUT

AV1

RF INPUT

AUDIO INPUT

AV OUTPUT

COAXIAL

AUDIO

OUTPUT

-5-

Page 8

ANTENNA CONNECTION

INSTALLATION

Note: Aerial connections:IEC(female). Input impendance:75 unbalanced.

-6-

Page 9

STEPS:

Be sure both the TV and computer are set to Power off.

1.Connect VGA and audio cable.

2.Connect the power cord.

3.Power on the TV, switch to VGA mode.

4.Power on the VGA.

This sequence is very important.

Pr L

AC INPUT 100-240V~50/60Hz

HDMI 2 INPUT

HDMI 1 INPUT

PRESET MODE

AV1

RF INPUT

VGA INPUT

AUDIO INPUT

RESOLUTION

720*400

640*480

800*600

1024*768

1280*1024

AV OUTPUT

AUDIO OUTPUT

COAXIAL

INSTALLATION

PC Audio

V.Freq.(Hz) H.Freq.(KHz)

31.47

37.86

37.50

35.156

37.88

48.08

46.88

48.36

56.48

60.02

63.98

80.00

-7-

Page 10

INSTALLATION

HEAD PHONE

S-VIDEO

VIDEO

AV2

AV EQUIPMENT

This TV provides two groups of AV ,one S-Video,one group of YPbPr for convenient connection to VCR,DVD or other video equipment,two group of HDMI for HD signal input Please refer to the owner s manual of the equipment to be connected as well.

You can use the input terminals on TV set rear as follows.

Rear connections

AC INPUT 100-240V~50/60Hz

VIDEO EQUIPMENT with YPbPr

HDMI 2 INPUT

HDMI 1 INPUT

VGA INPUT

To video

Input

Pr L

AV1

with VIDEO Input terminal

To audio Output

AUDIO

OUTPUT

VIDEO RECORDER

with SPDIF Input terminal

To audio Input

AUDIO INPUT

To video

output

RF INPUT

AV OUTPUT

COAXIAL

From Coaxial SPDIF output

AV Amplifier

With VIDEO terminal

HDMI

VIDEO EQUIPMENT

Side connections

S-VIDEO

HEAD PHONE

AV2

VIDEO

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo

system, etc.....

YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.

NOTE: AV2 and S-VIDEO share the audio input channel.

-8-

Page 11

REMOTE CONTROL

KEYS FUNCTION

SOUND

MUTE

AUDIO

RECALL

EXIT

PIC

TEXTTV/RADIOFREEZE

INDEX

LIST

TV MENU SOURCE

CH.LIST

SUBPAGE SIZE MIX SUBTITLE

POWER

2 3

4 5 6

7 8 9 0

VOL

SLEEP ASPECT

EPG FAV INFO

REVEAL

HOLD

Insert Batteries Into the Remote Control

1 2

1:POWER:To set the TV to standby or power on. 2:NUMERIC KEY:

For direct access to Channels.

3:TV MENU:To display TV menu.

4:CURSOR:To move within the menu. 5:CH.LIST:To display the channels list. 6:VOL+/- :To adjust sound level. 7:PIC:To switch picture mode. 8:SLEEP:S

et timer to turn off the TV.

9:FREEZE : To freeze the picture.

program being viewed and what's on Next inDTV mode.

11:FAV :T

10:EPG:T

o display information about the

o access your favourite channels list in TV or DTV mode.

12:TELETEXT KEYS: See page 10.

13:MUTE:To disable or enable the sound Output. 14: AUDIO:To select the available audio language of TV programs

or select sound channel.

15: RECALL: To access the previously viewed channel.

16: SOURCE: To select input source. 17: OK:To confirm selection. 18: EXIT:

To exit the menu.

19: SOUND:To switch sound mode. 20: CH+/CH-:To access the next or previous channels. 21: ASPECT: To change picture aspect ratio. 22:TV/RADIO:In DTV mode, it is u

switch between digital TV channels and radio stations.

sed to

23: TEXT:To enter or exit TELETEXT. 24: INFO:T

o display information about the channel being viewed or further information about the program when in small EPG screen in DTV mode.

25: SUBTITLE:T

o switch betweend

ifferent subtitles in DTV mode.

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.

3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.

Remark:

1) Alkaline Battery Recommended.

2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.

-9-

Page 12

OPERATION

BASIC OPERATION

TURN ON THE UINT

Press the ON/OFF Switch then press the POWER button on the remote control to switch on the power. The power indicator will light up in green colour, press the POWER button again to switch off the power, and the indicator will change to red.

CHANNEL SEARCH

Press the SOURCE button on the remote control to select the TV or DTV input mode, and press the OK button to confirm.If you are using the unit for the first time, an Installation Guide menu will be displayed to guide you

the channel scan,Use the remote control to finish channel scan (you can also refer to CHANNEL MENU

through

(page 11) in this manual for the channel scan operation).

NEW INSTALLATION

Menu Language English

Auto Tuning

EXIT

WATCH TV PROGRAM

Press the CH- or CH+ button to select the previous or next channels or press the 0-9 buttons to enter a channel number directly.Press CH.LIST button to view the channels list and press the buttons to select the desired TV programmes.

CHANGE VOLUME

Press the VOL - or VOL + button to adjust the volume level. Press the VOL - button repeatedly to decrease the volume; press the VOL + button repeatedly to increase the volume from 0 to 100.

CHANGE PICTURE MODE

Press the PIC button repeatedly to cycle through the available video picture modes.

CHANGE SOUND MODE Press the SOUND button repeatedly to cycle through the available sound modes.

VIEW CHANNEL INFORMATION

Press the INFO button to display the preset channel information.

MUTE Press the MUTE button to cut off the sound output, press this button again to resume sound output.

CHANGE INPUT SOURCE

Press the SOURCE button then press the buttons to select the input source and press the OK button to confirm.

-10-

Page 13

OPERATION

TELETEXT

Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.)

Press

EXT

SELECTING A PAGE

This is used to enter or exit teletext mode. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number. If the channel selected does not broadcast teletext, the indication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel).

Enter the number of the page required using the 0 to 9 up/down. Example: page 120, enter 120. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number.

You Will obtain:

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

SIZE

LIST

MIX

Coloured icons are displayed at the bottom of the screen. The 4 coloured buttons on the remote control are used to access the items or corresponding pages. The coloured icons flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain subpages which are automatically displayed successively. This key is used to stop or resume sub-page acquisition. The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

To zoom the page.

To save and display your favourite pages.

To mix teletext with video pictures.

-11-

Page 14

OPERATION

EPG (Electronic Programme Guide)

The EPG (Electronic Programme Guide) menu is used to look at what is being broadcast on a DTV or Radio channel at a later point in time.

EPG button to access the EPG menu, t

programme information of the channel currently being viewed will be displayed.

PROGRAMME GUIDE

20 Feb 2006 16:07

DTV 800 France 2

801 France 4

802 France 5 803 ARTE 804 LCP 805 France 3

EXIT

To see what is going to be broadcast after the current programme, press the button to view future programmes and press the button to return towards the programmes televised at the current time. To view a different channel, press the or button. To book a wanted programme for later watching, press the blue button to enter Reminder menu. Press the green button to enter the schedule list. To exit the EPG menu and watch the selected channel, press the EPG or EXIT button.

Last Exit

INFO

DTV 801 France 4

1555.1625 Last Exit

20 Feb

16:00 17:00

Information Movie 1 Programme 2 Programme 3 Programme 4 Programme 5

Schedule

DATE

Press the

he detailed

Reminder

MENU OPERATION

1.CHANNEL MENU

The first item of the menu is CHANNEL menu( for TV source only).

CHANNEL

Auto Tuning

DTV Manual Tuning

ATV Manual Tuning

Programme Edit

EXIT

You can search channels and edit programs here.

1).Auto Tuning: Search all the channels automatically (ATV, DTV & Radio)

Please select country first then select Start to update info

Country selection

Australia

Start Cancel

Press the buttons to select country then press the buttons to select start or cancel. Press the OK button to start or exit auto tuning .

NOTE: All the channels including ATV, DTV and Radio can be tuned at the one time .

2).DTV Manual Tuning: You can select a DTV channel then find the program in this channel

DTV Manual Tuning

UHF CH 30

Please select channel then press OK to search

Bad Nomal Good

EXIT

Pls press the buttons to select the channel , then press the OK button to search the programs .

NOTE: Bad Normal Good refers to the signal intensity.

3). ATV Manual Tuning :You can change the sound system to search the analog TV channels and fine tune the channels, then store the channels you selected.

ATV Manual Tuning

Storage To

System BG Current CH 1 Search Fine-Tune Skip Yes Frequency 255.25MHz

-12-

EXIT

SAVE

Page 15

OPERATION

Storage To: To select the channel number you want to save to.

System: To select the TV sound system. Current CH: To select the current channel. Search: To search backward/forward. Fine-Tune: To fine tuning when the signal level of

current channel is weak. Skip: When it set to Yes, the current channel will be skipped while you are changing channels by pressing the CH+ or CH- buttons.

Press the red button to store the channel after manual tuning .

4). Programme Edit: You can edit programs in the following items.

Delete

Press the red button, it will shows a red delete cursor. Press the buttons to choose the program.

Press the red button again, the program will be deleted.

Rename

You can only rename ATV programs. Move the cursor to the program, press the green button to rename the program. Press the TV MENU button to exit edit , Press the EXIT button to exit the menu.

Move

Move the cursor to the program, press the yellow button, it will show a yellow cursor, Press the buttons to move the program.

Skip

Press the buttons to choose the program, then press the blue button to skip this program,

SKIP

the icon will show on the right side of the program.

Choose the skipped program and press the blue button again to cancel skip, the icon will disappear.

SKIP

FAV

Press the buttons to choose the program, press the FAV button, it will show on the right side of the program.Choose the FAV program and press the FAV button again to cancel FAV, the icon will disappear .

Once your favourite group is created,you can press the FAV button to quickly access your favourite channel list.

2. PICTURE MENU

The second item of the menu is PICTURE menu. You can adjust picture effect here, including contrast, brightness and colour as well as other picture functions. Press the buttons to select items and press the buttons to adjust.

PICTURE

Picture Mode Dynamic

Contrast

Brightness

Colour

Sharpness

Tint

EXIT

(1)

PICTURE

Colour Temp Normal

Red

Green

Blue

Aspect Ratio 16:9

Noise Reduction ON

EXIT

70 70 70

(2)

PICTURE

PC Setup

EXIT

(3)

PICTURE

Auto Adjust

H-Position

V-Position

Clock

Phase

70 70 70

EXIT

NOTE:

1).Tint is available in NTSC system only.

2).PC Setup is available in VGA mode only.

(4)

-13-

Page 16

3.SOUND MENU

The third item of the menu is the SOUND menu. You can adjust the sound effect here, including treble, bass and balance as well as other sound functions. Press the buttons to select and press the buttons to adjust.

SOUND

Sound Mode Standard

Treble

Bass

Balance

Surround Sound Off

EXIT

50 50 0

4.TIME MENU

The forth item of the menu is the TIME menu. You can adjust the clock, power on/off time, sleep timer and time zone as well as other time clock functions. Press the buttons to select and press the buttons to adjust.

TIME

Clock

Off Time Off

On Time Off

Sleep Timer Off

Auto Sleep Off

Time Zone New South Wales GMT +10

EXIT

Time Zone:

Press the buttons to adjust the Time Zone.

NOTE: When the Auto Sleep is set to ON, the unit will turn to standby mode automatically if there is no signal input for a period of about 15 minutes.

5.DEFAULT MENU

The fifth item of the MENU is the DEFAULT menu.

Note:

1). Audio Language, Subtitle Language are optional under DTV source.

DEFAULT

Menu Language English

Audio Language English

Subtitle Language English

Hearing impaired Off

Country Australia

EXIT

OPERATION

6.LOCK MENU

The sixth item of the menu is the LOCK menu. You can lock system, set password, block program, set parental guidance, restore factory default and set maximum volume control.

LOCK

Lock System Off

Change Password

Block Programme

Parental Guidance Off

Restore Factory Default

Max Volume 100

EXIT

To enter the LOCK menu, password will be requested, the default password is 6666. The master password is 9527 and may be entered if the user set password is lost or forgotten (in order to program a new password). Please note this master over-ride password does not change and therefore should not be given to people you do not wish to allow access to your locked settings.

1. The super password cannot be erased, it will always remain operational

2. If you forget the password, enter the super password. And then modify your password, enter the new password twice to confirm that success.

LOCK System:

Press the buttons to turn ON or OFF. If it is set to ON, you will be asked to enter password when searching the channels .

Change Password:

Press the or OK button and enter the new password.

Block Programme:

Press the or OK button to enter the program list. Press the buttons to select the channel you want to lock then press the green button to lock, the lock icon will appear behind the locked channel. To unlock the channel, select the locked channel and press the green button again,the lock icon will disappear.

Parental Guidance:

Press the buttons to set the program rating to block some programs. Note:

1). Parental Guidance is optional.

Restore Factory Default:

Press the or OK button to restore, this operation will reset the unit to factory default and all the settings and stored channels will be cleared.

Max Volume:

Press the buttons to set the maximum volume. Note:

1). Max Volume is optional.

-14-

Page 17

TROUBLESHOOTING

Problem

Picture Audio

Snow Noise

Ghost

Interference

Normal Picture

No picture Mute

Normal audio

Noise

Mute

Check

antenna position, direction or connection

electronic equipment,car/ motorcycle,fluorescent light

Volume(check if mute is activated or if the audio system connections are not correct)

Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press standby key on the remote control for inspecting Antenna Loose.

No colour Normal audio Colour control

Picture breaking up

No colour

Mosaic

Normal audio or weak

Noise

Unnormal

Retune channel

TV system

Antenna Loose

-15-

Page 18

LCD :

ViewingPicture Size(diagonal)

Resolution

Aspect Ratio

Display colours

Brightness

Contrast ratio

Response time

Viewing angle

TV:

TV system

DVB-T decode

DVB-T de-modulation

Terminals:

Rear Analog RGB(VGA) Input Rear HDMI Input

Rear Composite Video Input

Rear Audio Input

Rear Y Cb(Pb) Cr(Pr) Input

Side Composite Video Input

Side S-Video Input

Side HEAD PHONE Output

Side Audio Input

Rear Composite Video Output

Rear Analog Audio Output

Rear Coaxial SPDIF Output

Others:

Input Power Voltage

TECHNICAL SPECIFICATIONS

1920x1080

16:9

16.7M

450 cd/m

2000:1

8ms

178(H)/178(V)

Digital TV: DVB-T Analog TV: PAL/SECAM

Audio: MPEG2 Audio Layer I&II Video: MPEG2 Transport MP@HL

Demodulator : COFDM OFDM Mod.: 2K, 8K FFT, SFN and MFN Packed Carries: 2K/8K Guard Interval: 1/4, 1/8, 1/16, 1/32

100V-240V~ 50/60Hz

Power Consumption

Audio Output P o we r THD 7%

230W

)

2x 8W

-16-

Page 19