PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
A. Introduction
Thank you for choosing the portable DVD player. The main features
include a 22 CM Wide Screen (16:9 Aspect Ratio) Liquid Crystal
Display (LCD) monitor and a DVD player. The unit applies the latest
state of the art electronics and is designed for use in hotels, offices
or your home. The unit is constructed to provide years of reliable,
trouble-free service, and is compact so that you can take it with you
anywhere and is designed for quick and easy installation. Please read
the entire instruction manual supplied with this product prior to using.
The documentation will assist you in installing the system properly to
obtain the best equipment performance. Please save this manual for
later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
from strong magnets, heat sources, direct sunlight, excessive dust.
If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit. When you move it from a cold
to a warm location, wait for about one hour before operating the
unit, or remove the disc and leave the unit turned on until the moisture evaporates.
2. Installation
Ensure that the 22CM portable DVD player is installed in accordance with the instructions and illustrations provided in this manual.
3. Caution
Do not push objects of any kind into the unit through openings;
do not spill or spray liquid of any kind on or in the system (this
may result in a fire or electric shock). Do not place anything
heavy on the unit. To ensure proper ventilation and proper
1
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
operation, never cover or block the slots and openings with a cloth
or other material. Keep the unit away from an open flame such as
fire, candle etc. It is hazardous to replace the battery incorrectly.
Replace the battery only with the same or equivalent type, in order
to protect the environment, please dispose the battery properly.
Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius.
4.Disassemble
Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system needs repair.
5. Cleaning Unit
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the system
only.
6. Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper,
tape or glue on the disc. Do not expose the disc to direct sunlight
or heat sources. Do not touch the surface of disc. Handle the disc
by its edge. Clean the disc by wiping the disc from the center out
with a cleaning cloth. Remove the disc from the unit and store it in
its case after playing. Some playback operations of discs may be
intentionally fixed by software producers. Since this unit plays discs
according to the disc contents the software producers designed,
some playback features may not be available. Also refer to the instructions supplied with the discs.
2
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
7.Regional Coding
Both the DVD player and disc are coded by region. These
regional codes must match in order for the disc to play. If the
codes don’t match, the disc won’t play. This unit’s code is region
4. DVD is with other regional codes cannot be played in this unit
C. Contents
1. 1 x 22CM LCD Monitor & DVD Player Combo
2. 1 x Remote Control with battery (CR2025)
3. 1 x Audio/Video Cable
4. 1 x AC to DC Adapter
5. 1 x Cigarette Lighter Adapter
6. 1 x Instruction Manual
7. 1 x Rechargeable Battery
8. 2x Headphone
9. 1x Game Pad
10. 1 x Carry Bag
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC input jack on the
left side of the main unit, then plug the other end into the 110~240V
AC power receptacle.
2. Powering the system in a car
Plug one end of the cigarette lighter adapter into the DC input jack
on the unit, then plug the other end into the cigarette lighter socket.
Figure 1
3
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Note: Unplug the apparatus when not using for a long time or
intent to disconnect from the Mains power.
3. Installation In Vehicle
1) Take out carry bag and unit. Open them for installation.
2) Place unit into the bag across the waist flex and make sure
four corners of unit are tightened by narrow flexes.
3) Place the bag with unit into back of car seat and fasten it into
the headrest with length adjustable waist strap.
4) Handle the carrying wide strap on the top portion of bag not to
turn back screen.
4
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
E. Controls, Indicators, and Connectors
1. Unit View (Refer to Figure 2)
Figure 2
1) DC 9V Input Jack
2) AV Jack
3) AV In/Out SW
4) USB Port
5) E-Port
6) Power on/off SW
7) LCD Panel shut off
8) Wide Button
9) Previous/Next/Pause/Stop/Play
10)Menu Button
11) Up/Down/Left/Right/OK Button
12) Close place
13) SD/MMC/MS Slot
14) Power LED
15) Remote Control Sensor
16) Open Switch
17) Brightness Up/Down Control
18) Volume Up/Down Control
19) Headphone Jack 1
20) Headphone Jack 2
21) Charge LED
5
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
2. Remote Control (Refer to figure 3)
1) Setup Button
2) Up Button
3) Skip- Button
4) Enter Button
5) Reverse/Left Keypad
6) DOWN Button
7) Numeric Button
8) Display Button
9) Zoom Button
10) SD/USB/DVD Button
11) Skip+ Button
12) A-B Repeat Button
13) Forward/Right Keypad
14) 1/All Repeat Button
15) Stop Button
16) Menu Button
17) Subtitle Button
18) Audio Button
19) Play/Pause Button
Figure 3
F. Loading and Playing a Disc
a. After connecting power to the unit, power on “DVD player” with the
power switch. The power indicator will light.
b. Open the disc tray by sliding OPEN switch, and place a disc into
the tray with the label side facing up.
c. Close the tray by pressing the area marked “PRESS” .The unit will
load the disc and start playing.
d. Rotate BRIGHTNESS and VOLUME to adjust the LCD’s bright-
ness and the DVD player’s volume.
e. To stop playing a disc, press STOP.
6
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.