AWA BDU125K Operating Instruction

User Manual
DVD/CD PLAYER WITH STEREO RADIO
USB PORT & SD/MMC CARD
AND REMOTE CONTROL
MODEL: BDU125K
READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING.
THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE.
PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE.
Illustration of the Controls/Jacks On the Main Unit
3
12
55
12 13 14 15 16
17 19 21 22 24 26
18 20 23 25
678910
27 28 29 30
4
11
POWER INDICATOR
FM STEREO INDICATOR
DISC TRAY OPEN/CLOSE BUTTON
REMOTE SENSOR
SPEAKERS
6. AUDIO IN JACK
MIC JACK
MIC LEVEL CONTROL
USB PORT
10.
SD/MMC CARD SLOT
11.
DISC TRAY
12.
VOLUME CONTROL
13.
PHONES JACK
14. HANDLE
15.
TFT DISPLAY
16.
TUNING CONTROL
17.
FUNCTION SWITCH
18.
MENU BUTTON
19. REPEAT
20. AUDIO
21. DISPLAY
22.
STOP&USB/SD/MMC CARD BUTTON
23.
SKIP DOWN/PREVIOUS&F.FBW BUTTON
24.
SKIP UP/NEXT&F.FWD BUTTON
25.
PLAY/PAUSE BUTTON
26.
BAND SWITCH
27.
TELESCOPIC FM ANTENNA
28.
VIDEO JACK
29.
AUDIO RIGHT JACK
30. AUDIO LEFT JACK
31. BATTERY COMPARTMENT
32.
VOLTAGE SELECTOR (OPTIONAL)
33.
AC SOCKET
BUTTON
BUTTON
BUTTON
32 33
31
Illustration of the Keys on the Remote Controller and Their Main Functions
1. SCREEN ON/OFF & BRI/COL BUTTON
1
2
3 4
5
6
7
820
9
10 11 12 13
14
15
16
17
18 19
2. TITLE BUTTON
3. PREV/F.BWD BUTTON
4. NEXT/F.FWD BUTTON
5. NAVIGATION BUTTONS
6. NUMERIC BUTTONS
7. PROGRAM/ANGLE BUTTON
8. MUTE BUTTON
9. OPEN/CLOSE BUTTON
10. SETUP BUTTON
11. MENU BUTTON
12. DISPLAY BUTTON
13. STOP BUTTON
14. OK(PLAY/PAUSE) BUTTON
15. SUBTITLE BUTTON
16. AUDIO BUTTON
17. SEARCH BUTTON
18. REPEAT BUTTON
19. ZOOM/SLOW BUTTON
20. USB/CARD BUTTON
1
Basic connection
Ü
The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
It is recommended to be connected to a multi-system TV.
Ensure that this player and other equipment to be connected to the unit are in the standby or off mode and disconnect the AC power cords before commencing connection.
Do not block ventilation holes of any piece of the equipment and arrange them so that air can circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color coding when connecting audio, video cables.
Note:
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume to the desired level.
If the DVD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back normally with some DVDs. If this is the case, do not connect the player via the VCR.
To power outlet
AC power cord
LR
To video input connector (yellow) To audio input connectors (red, white)
Video/audio cable
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
GET STARTED
1. Insert the AC cord to the AC socket of player, and plug the other end to an applicable wall outlet. slide the FUNCTION switch to the DVD/USB/CARD position.
2. Open the disc tray.
3. Place a disc onto the disc tray.
4. Close the disc tray andtheplaybackstarts automatically.
5. When a menu screen appears on the TV, move the navigation buttons or press the numeric buttons to select a preferred track number, then press OK button to start playback.
ADJUST THE VOLUME
Adjust the volume to your favorite by rotating the volume control.
SKIP AHEAD OR BACK
Press NEXT or PREVIOUS button on the remote or SKIP DOWN/PREVIOUS BUTTON &SKIP UP/NEXT BUTTON once during play to skip a chapter(DVD) or a track (CD) ahead or backwards.
RAPID ADVANCE/REVERSE
During playback, press and hold F.FWD button or F. BWD button several times to scan the disc forward or backward at X2, X4, X8, X20 normal speed. Press PLAY button to resume normal play.
STOP PLAYBACK
Press STOP button during playback to stop playback; the player activates its resume function when STOP is pressed in STOP mode; press PLAY button again, playback resumes at the point it stopped previously; open the disc tray or press the STOP button one more time to clear the resume function.
SLOW-MOTION PLAY (DVD)
Press and hold ZOOM/SLOW button on the remote control during playback, the disc will be played at 1/ 2 normal speed at first, each time this button is pressed, the play speed becomes slower (down to 1/7 normal speed.) Press PLAY/PAUSE button, normal play will resume.
REPEAT
Press REPEAT button during play, it will repeat play one chapter/title or repeat all (for DVD disc), or repeat play a track or all tracks (CD), or repeat the specified points (A-B).
SEARCH FOR PREFERRED SCENE
1. Press SEARCH button during play and highlight the item to be played (Title, Chapter, or Chapter time)by navigation buttons.
2. Input the desired number or time via the numeric buttons.
3. Press OK Button to confirm and the playback from the located scene starts.
4. To exit search menu, press SEARCH button directly.
PROGRAM PLAY(UP TO 16 MEMORIES)
1. Press PROGRAM during playback to display the program
menu.
2. Select location(s) to be memorized via navigation buttons
and then enter desired Titles/Chapters numbers via numeric buttons.
: Inputting leading zero is not necessary. If the
Note
chapter/title/track number is behind the cardinal 10, press the unit digital key first and then another unit digit. Some figure inputs may be useless, because it 's greater figure than total title/chapter/track number on the disc. Example: Track 3, press "3"
Track 12, press "1" and then "2" Track 21, press "2" and then "1"
3. To start programmedplayback, select PLAYon the menu, and
then press OK Button on theremotecontrol.
pressing PROGRAM button again to exitprogramming.
4. To clear all items, select the <CLEAR> on the menu, and then
press OK button on remote control.
5. To change programmed items, scroll the Navigation button to
the item to be changed and enter the desired track number on the screen, the selected item willbechanged.
6. You can also cancel program mode by clearing all the items in
the program menu.
ZOOM PLAY
Press the ZOOM/SLOW key continuously to zoom in the picture by 2, 3, and 4 times,zoomoutby 1/2, 1/3, 1/4 normal size. Press this key once more when the picture is at 1/4 size to return to the normal size display. Scroll to view the enlarged pictureusingNavigation buttons.
ON SCREEN DISPLAY INFORMATION
When the player is in operation, press DISPLAY button continuously on the remote control, the screen will display parts of information(current disc type, title number, chapter number, playtime, audio language, audio type, subtitle language and multi angle, etc) in a sequence.
2
Loading...
+ 4 hidden pages