For H.264 4/8/16-channel digital video recorder All rights reserved
HD-TVI DVR User Manual
CAUTION
Please read this user manual carefully to ensure that you can use the device correctly and
safely.
There may be several technically incorrect places or printing errors in this manual. The
updates will be added into the new version of this manual. The contents of this manual are
subject to change without notice.
This device should be operated only from the type of power source indicated on the
marking label. The voltage of the power must be verified before using. If the device doesn‟t
work for a long time, pull out the plug from the socket.
Do not install this device near any heat sources such as radiators, heat registers, stoves or
other device that produce heat.
Do not install this device near water. Clean only with a dry cloth.
Place the device in a well-ventilated area.
Do not power off the DVR at normal recording condition!
This machine is indoor using equipment. Do not expose the machine in rain or moist
environment. In case any solid or liquid get into the machine‟s case, please cut off the power
supply immediately, and ask for qualified technicians to check the machine before restart
Do not try to repair the device by yourself without technical aid or approval.
When this product is in use, the relevant contents of Microsoft, Apple and Google will
be involved in. The pictures and screenshots in this manual are only used to explain the
usage of our product. The ownerships of trademarks, logos and other intellectual properties
related to Microsoft, Apple and Google shall belong to the above-mentioned companies.
This manual is suitable for 4/8/16-channel HD-TVI digital video recorders. All examples
and pictures used in the manual are from 4-channel DVR.
Appendix A FAQ ................................................................................................................. 52
Appendix B Calculate Recording Capacity ...................................................................... 56
Appendix C Compatible Devices ....................................................................................... 57
Appendix D 4 CH Specifications ....................................................................................... 58
Appendix E 8 CH Specifications ........................................................................................ 59
Appendix F 16 CH Specifications ...................................................................................... 60
HD-TVI DVR User Manual
1 Introduction
1.1 DVR Introduction
This model is standard 4/8/16 CH 1080P/720P/960H high resolution DVRs, which adopts
high performance video processing chips and embedded Linux system. Meanwhile, it utilizes
many most advanced technologies, such as standard H.264 with low bit rate, Dual stream,
SATA interface, VGA output mouse supported, IE browser supported with full remote control,
mobile view(by phones), etc., which ensure its powerful functions and high stability. Due to
these distinctive characteristics, it is widely used in banks, telecommunication, transportation,
factories, warehouse, and irrigation and so on.
1.2 Main Features
COMPRESSION FORMAT
Standard H.264 compression with low bit rate and better image quality
Supports channel security by hiding live display
Display the local record state and basic information
Supports USB to make full control
RECORD MEDIA
Supports one SATA HDD to record for a longer time without any limitation
BACKUP
Supports USB 2.0 devices to backup
Supports saving recorded files with AVI standard format to a remote computer through
internet
RECORD & PLAYBACK
Record modes: Manual, Schedule and Motion detection recording
Supports recycle after HDD full
Resolution, frame rate and picture quality are adjustable
1 audio channels available
Three record search modes: time search, event search and image search
4/8 channels playback simultaneously
Supports deleting and locking the recorded files one by one
Supports remote playback in Network Client through LAN or internet
ALARM
Supports schedule for motion detection
1
HD-TVI DVR User Manual
Supports pre-recording and post recording
PTZ CONTROL
Supports various PTZ protocols
Supports 128 PTZ presets and 8 auto cruise tracks
Supports remote PTZ control through internet
SECURITY
Customize user right: log search, system setup, two way audio, file management, disk
management, remote login, live view, manual record, playback, PTZ control and remote live
view
Supports 1 administrator and 63 users.
Supports event log recording and checking, events unlimited
NETWORK
Supports TCP/IP, DHCP, PPPoE, DDNS protocol
Supports NAT technology
Supports IE browser to do remote view
Supports QRCODE Scanning through mobile phone client
Supports setup client connection amount
Supports dual stream. Network stream is adjustable independently to fit the network
bandwidth and environment.
Supports picture snap in remote live
Supports remote time and event search, and channel playback with picture snap
Supports remote PTZ control with preset and auto cruise
Supports remote full menu setup, changing all the DVR parameters remotely
Supports mobile surveillance by phones with iPhone, Android & Blackberry OS
Supports CMS/NVMS to manage multi devices on internet
2
HD-TVI DVR User Manual
2 Hardware Installation
2.1 Install Hard Drive
Check the unit and the accessories after getting the DVR. Please don‟t power up the unit till
the physical installation is complete.
Notice: 1. This series support one SATA hard drive. Please use the hard drive the
manufacturers recommend specially for security and safe field.
2. Please calculate HDD capacity according to the recording setting. Please refer to
“Appendix B Calculate Recording Capacity”.
① Loosen the screws on the back and side ② Take out the HDD.
of the device to remove the cover.
③ Put the HDD on the bottom of the ④ Turn over the device and fix the HDD
device. with the screws.
⑤ Connect the power and data cables. ⑥ Install the cover back and fix it with the
screws.
Note: For convenience installation, please connect the power and data cables first and
then fix the HDD with the screws.
3
HD-TVI DVR User Manual
Name
Description
REC
When recording, the light is blue
Net
When access to network , the light is blue
Power
Power indicator, when connection , the light is blue
Fn
Switch the resolution of the VGA / HDMI output
Name
Description
Power indicator
Power Indicator, when connected, the light is blue.
HDD indicator
The light turns blue when reading/writing HDD.
Net indicator
The light turns blue when it is able to access the network.
Backup indicator
The light turns blue when backing up files and data.
Play indicator
The light turns blue when playing video.
REC indicator
The light turns blue when recording
Record button
Record manually
Play button
Enter play interface
REW button
Rewind key
FF button
Fast forward
MENU/+ button
1. Enter menu in live 2. Increase the value in setup
BACKUP/- button
1. Decrease the value in setup 2. Enter backup mode in live
STOP/ESC button
1. Quit play mode 2. Exit the current interface or status
Direction button/
Multi-screen
Change direction to select items
Change screen display mode like1/4/9/16 channel
Enter button
Confirm selection
USB
Connect to USB mouse, or USB storage device
2.2 Front Panel Descriptions
Notice: The front panel descriptions are only for reference; please make the object as
the standard.
Front panel I
Front panel II
2.3 Rear Panel Instructions
Rear Panel for 4 CH
4
HD-TVI DVR User Manual
Name
Descriptions
DC12V
DC12V Power Input.
USB
To connect external USB devices like USB mouse or USB storage device.
LAN
Network Port.
HDMI
HDMI Port. Connect to high-definition display device.
VGA
VGA Port. Connect to monitor.
HD TVI VIDEO IN
Support (HD-TVI signal) 1080P@25/30fps, 720P@25/30/50/60fps, (analog
signal) 960H, D1 video input.
AUDIO OUT
Audio output, connect to the sound box.
AUDIO IN
1 CH Audio Input.
RS485
Connect to keyboard or speed dome; A is TX +; B is TX-.
Rear Panel for 8 CH
Rear Panel for 16 CH
2.4 Remote Controller
It uses two AAA size batteries.
① Open the battery cover of the remote controller.
② Place batteries. Please take care the polarity (+ and -).
③ Replace the battery cover.
Key points to check in case the remote doesn‟t work.
1. Check batteries polarity.
2. Check the remaining charge in the batteries.
3. Check IR controller sensor for any masking.
If it still doesn't work, please change a new remote controller to try, or contact your dealers.
The interface of remote controller is shown below.
5
HD-TVI DVR User Manual
Button
Function
REC
Record manually.
Search
To enter search mode.
MEUN
To enter menu.
Exit
To exit the current interface.
ENTER
To confirm the choice or setup.
Direction
button
To move cursor in setup.
ZOOM
To zoom in.
PIP
To set picture in picture.
To control playback. Play/Pause/Stop/Previous
Section/Next Section/Rewind/Fast Forward.
Multi
To choose multi screen display mode.
Next
To switch between single picture and picture group.
SEQ
To enter auto dwell mode.
INFO
Get information about DVR like firmware version,
HDD information.
2.5 Control with Mouse
2.5.1 Connect Mouse
It supports USB mouse through the ports on the rear panel.
If mouse is not detected or doesn't work, check below steps:
1. Make sure the mouse is plugged in the USB mouse port.
2. Try with a good know mouse.
2.5.2 Use Mouse
During live:
Double-click on any camera window to see the full screen. Double-click again to return to the
previous screen.
Right click to reveal the control menu on the screen. Right click again to hide the menu.
In Configuration:
Click to enter a particular option. Right click to cancel the option or to return to the previous
menu.
In order to input a value in a particular screen, move cursor to the input box and click. An
input window will appear as below. It supports digits, alphabets and symbols input. Click Shift
button to input Capital letters and symbols; click Shift button again to return.
It supports mouse drag. Take setting up motion detection area for example: Click customized,
hold down the left button and drag to set motion detection area.
6
HD-TVI DVR User Manual
Click to choose the options. Right click to return to live mode.
In Backup:
Click to choose the options. Right click to return to previous picture.
In PTZ Control:
Click left button to choose the buttons to control the PTZ. Click right button to return to live.
Note: Mouse is the default tool for all operations unless an exception, as indicated.
7
HD-TVI DVR User Manual
3 Basic Function Instruction
3.1 Power On/Off
Before you power on the unit, please make sure all the connection is good.
3.1.1 Power On
① Connect with the power.
② The device will boot and the power LED would turn blue.
③ A WIZZARD window will pop up and show some information about time zone, time
setup, network configuration, record configuration and disk management. User can set
up here and refer to the concrete setup steps from the corresponding chapters. If users
don‟t want to set up Wizard, please click Exit button to exit. Press and hold FN/ESC key
to switch the resolution of the VGA/HDMI output.
3.1.2 Power Off
You can power off the device by using remote controller, keyboard and mouse.
① Go to Menu and then select “Shut Down” icon to pop up the Shut down window.
② Click OK. Then the unit will power off after a while.
③ Disconnect the power.
3.2 Login
User can login or log off the DVR system. Once logged off the user cannot do any other
operation except changing the multi-screen display.
Fig 3-1 Login
Notice: The default user name is “admin” and the default password is “123456”.
For complete operational steps for changing password, adding or deleting users,
please refer to section 4.7 User Management Configuration.
8
HD-TVI DVR User Manual
Symbol
Meaning
Green
Manual record
Yellow
Motion detection record
Blue
Schedule record
3.3 Live Preview
Fig 3-2 Live Preview Interface
3.4 Live Playback
Click Playback button to playback the record. Refer to Fig 3-3. User can do complete
operation by clicking the buttons on screen.
Fig 3-3 Live Playback
9
HD-TVI DVR User Manual
4 Main Menu Setup Guide
Click right mouse or press FN/ESC button on the front panel and then the control bar will
display at the bottom of the screen. Refer to Fig 4-1.
Fig 4-1 Main Menu Toolbar
Screen Mode: Click to choose screen mode.
Dwell: Dwell means to display live images from different cameras in a sequence. The images
may be displayed as a single channel or in a grid fashion from different cameras. Dwell mode
is enabled only when the chosen display mode is not able to display all the available cameras.
E-Zoom: Single channel large screen electronic amplification.
Audio: Enable sound.
PTZ: Click the PTZ button to control rotation position, speed and auto scan of the PTZ.
Snap: Click this button to snap the live pictures. These pictures will automatically be saved in
the SATA disk.
Record: Click this button to start/stop recording.
Playback: Click this button to playback the record files.
Click Main Menu button to pop up a window as Fig 4-2. You can also press MENU button on
the front panel or operate with remote controller to display the main menu. Clicking Setup
icon will pop up the configuration menu.
Fig 4-2 Setup
4.1 Basic Configuration
Basic configuration includes three sub menus: system, date & time and DST.
10
HD-TVI DVR User Manual
4.1.1 System
Go to MenuSetupBasic System interface. Refer to Fig 4-3.
Fig 4-3 Basic Configuration-System
In this interface you can set up the device name, device ID, video format, max network users,
VGA resolution, language and so on. The definitions for every parameters display as below:
Device Name: The name of the device. It may display on the client end or CMS that help user
to recognize the device remotely.
Device ID: This ID is used to map the speed dome cameras.
Video Format: Two modes: PAL and NTSC. User can select the video format according to
that of camera.
Password Check: If this option is enabled, the user would need to input the user name and the
password for performing corresponding operations.
Show System Time: If selected, the current time will be displayed during live monitoring.
Max Online Users: To set the max number of concurrent user logins in the DVR.
Video Output: The resolution of live display interface.
Language: Set up the menu language.
Note: After changing the language and video output, the device needs to login again.
Logout After (Minutes): A user can set up the screen interval time (30s, 60s, 180s, 300s). If
there is no any operation within the setting period, the device will auto logout and return to
login interface.
Show Wizard: If selected, the GUI would launch the startup wizard on every boot, allowing
the user to do basic setup.
No Image When Logout: If selected, there will be no image showing when logging out.
4.1.2 Time & Date
① Go to MenuSetupBasic Date & Time interface. Refer to Fig 4-4.
11
HD-TVI DVR User Manual
Fig 4-4 Basic Configuration-Date & Time
② Set the date format, time format, time zone in this interface; checkmark “Sync Time
With NTP Server” to refresh NTP server date. You can also adjust system date manually.
③ Click “Apply” button to save the setting.
4.1.3 DST
① Go to MenuSetupBasic DST interface. Refer to Fig 4-5.
Fig 4-5 Basic Configuration-DST
② In this interface, enable daylight saving time, time offset, mode, start & end
month/week/date, etc.
③Click “Apply” button to save the setting.
4.2 Live Configuration
Live configuration includes three submenus: live, main monitor and mask.
4.2.1 Live
In this interface, you can set up camera name.
To set up camera name:
① Go to MenuSetupLive. Refer to Fig 4-6.
12
HD-TVI DVR User Manual
Fig 4-6 Live ConfigurationLive
② A software keyboard will pop up by clicking camera name area. Click the letters and (or)
digital numbers on the keyboard to input the name you want to display in live image.
③ Checkmark the camera name in the show name area.
④ All channels will show the camera name by checking “All” checkbox.
⑤ Click “Apply” to save the setting.
4.2.2 Main Monitor
The main monitor settings allow you to set camera sequence in live display mode.
Operate the following steps to set main monitor:
① Go to MenuSetupLive Main Monitor interface. Refer to Fig 4-7.
Fig 4-7 Live Configuration-Main Monitor
② Select display mode and channel.
③ Select dwell time. Click button to set up the previous channel groups of dwell
picture. Click button to set the latter channel groups of dwell picture.
④Click “Apply” to save the setting.
4.2.3 Mask
If there is something you don‟t want to display in the live image. You can set mask. For a
13
HD-TVI DVR User Manual
given channel a maximum of three areas can be masked.
To set up mask area:
① Go to MenuSetupLive Mask interface.
Fig 4-8 Live Configuration-Mask
② Click Setting button to go into live image.
③ Press and drag the left mouse button to set mask area as shown below.
④ Right click to exit the mask setting interface.
⑤ Click Apply button to save the setting.
To delete mask area
① Click Setting button in the mask interface.
② Select a certain masked area and double click to delete that masked area.
③ Then click Apply button to save the setting.
Fig 4-9 Setting Mask Area
4.3 Record Configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record,
stamp and snap.
Before Configuration, please make sure your DVR has been installed with HDD and has
completed its initialization.
14
HD-TVI DVR User Manual
Parameter
Meaning
Record
To enable/disable recording for the channel
Audio
To enable/disable audio recording for the channel
4.3.1 Enable
① Go to MenuSetupRecordRecord interface. Refer to Fig 4-10.
Fig 4-10 Record Configuration-Record
② Checkmark record and audio.
③ Select All to set up the same settings for all channels.
4.3.2 Record Bitrate
① Go to MenuSetupRecord Record Bitrate. Refer to Fig 4-11.
Fig 4-11 Record Configuration-Record Bitrate
② Set up rate, resolution, quality, encode and max bit stream.
③ Select “All” to set the same settings for all channels.
④ Click “Apply” button to save the setting.
15
Loading...
+ 46 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.