Avycon AVR-HN504P4-1T, AVR-HN504P4-2T, AVR-HN504P4-3T, AVR-HN504P4-4T, AVR-HN504P4-6T User Manual
...
NVMS-1000
User Manual
Contents
1 Software Introduction ...........................................................................................................................1
1.1 Summary ................................................................................................................................................ 1
1.2 Operation Environment ......................................................................................................................... 1
1.3 Install and Uninstall ............................................................................................................................... 2
1.3.1 Install the Software .................................................................................................................... 2
1.3.2 Uninstall the Software ............................................................................................................... 4
2 Login Software ......................................................................................................................................5
2.1 Login ...................................................................................................................................................... 5
2.2 Control Panel Instruction ....................................................................................................................... 6
3 Device Management ..............................................................................................................................8
3.1 Add Device ............................................................................................................................................ 8
3.2 View, Change or Delete Device ............................................................................................................. 9
3.3 Area and Camera Management ............................................................................................................ 14
3.3.1 Area Management .................................................................................................................... 15
3.3.2 Camera Management ............................................................................................................... 15
4 Storage Server Management ............................................................................................................... 21
4.1 Create Storage Server .......................................................................................................................... 21
4.2 Change or Delete the Information of Storage Server ........................................................................... 21
5 Group and Scheme Setting .................................................................................................................. 29
5.1 Camera Dwell Group ........................................................................................................................... 29
5.1.1 Create, Change or Delete the Camera Group ........................................................................... 29
5.1.2 Add or Remove the Camera Group ......................................................................................... 29
5.2 Group Dwell Scheme ........................................................................................................................... 30
5.2.1 Create Scheme ......................................................................................................................... 30
5.2.2 Change and Delete Group Dwell Scheme................................................................................ 30
6 Live Preview ....................................................................................................................................... 31
6.1 Preview ................................................................................................................................................ 32
6.1.1 Monitory Point Preview ........................................................................................................... 32
6.1.2 Stop Preview ............................................................................................................................ 32
6.2 Dwell Preview ..................................................................................................................................... 33
6.2.1 Group Dwell Preview .............................................................................................................. 33
6.2.2 Scheme Dwell Preview ............................................................................................................ 34
6.3 Preview Control ................................................................................................................................... 34
6.4 Snap ..................................................................................................................................................... 35
6.4.1 Snap ......................................................................................................................................... 35
6.4.2 Snap Number ........................................................................................................................... 35
6.4.3 Record and Snap Path .............................................................................................................. 35
6.5 Multi-screen to Preview ....................................................................................................................... 35
6.6 Talk and Broadcast............................................................................................................................... 36
6.6.1 Talk .......................................................................................................................................... 36
6.6.2 Broadcast ................................................................................................................................. 37
6.7 PTZ Control ......................................................................................................................................... 37
6.7.1 Parameter Configuration of PTZ ............................................................................................. 37
6.7.2 PTZ control .............................................................................................................................. 37
7 Record Management ........................................................................................................................... 38
7.1 Manual Record..................................................................................................................................... 38
7.2 Schedule Record .................................................................................................................................. 38
7.3 Motion Detection Record..................................................................................................................... 39
7.4 Sensor Alarm Record ........................................................................................................................... 39
7.5 Storage Server Record ......................................................................................................................... 40
7.6 Set Record Partition ............................................................................................................................. 40
8 Playback Management ........................................................................................................................ 41
8.1 Playback ............................................................................................................................................... 43
8.1.1 Playback Synchronously .......................................................................................................... 43
8.1.2 Playback Asynchronously ........................................................................................................ 43
8.1.3 Playback by Setting Time ........................................................................................................ 44
8.1.4 Playback by Searching Event................................................................................................... 44
8.1.5 Playback by Record Player ...................................................................................................... 45
8.2 Snap When Playback ........................................................................................................................... 45
8.3 Clip and Backup Record ...................................................................................................................... 45
8.3.1 Clip and Backup Record .......................................................................................................... 45
8.3.2 Backup Path Configuration ...................................................................................................... 45
8.4 Download Record By Time Search ..................................................................................................... 45
8.5 Download Record by Event Search ..................................................................................................... 46
8.6 View the Progress of Downloading ..................................................................................................... 46
9 Alarm Management ............................................................................................................................ 47
9.1 Sensor Alarm ....................................................................................................................................... 47
9.2 Motion Detection Alarm ...................................................................................................................... 48
9.3 Video Loss Alarm ................................................................................................................................ 49
9.4 Alarm Preview ..................................................................................................................................... 50
9.4.1 Alarm Preview Configuration .................................................................................................. 50
9.4.2 Alarm Preview ......................................................................................................................... 51
10 E-Map ................................................................................................................................................. 52
10.1 Create map ........................................................................................................................................... 52
10.2 Modify or Delete Map, Hotspot and Hotzone ..................................................................................... 53
10.2.1 Change or Delete Map ............................................................................................................. 53
10.2.2 Add, Change and Delete Hotzone ............................................................................................ 53
10.2.3 Add, Change and Delete Hotspot ............................................................................................. 54
10.3 E-map Monitoring Settings .................................................................................................................. 54
10.4 E-map live preview .............................................................................................................................. 54
11 Local Log ............................................................................................................................................ 57
11.1 Search log ............................................................................................................................................ 57
11.2 Log Maintenance ................................................................................................................................. 58
11.3 Export .................................................................................................................................................. 58
12 User Management ............................................................................................................................... 59
12.1 Create a Resource with the Default Permission ................................................................................... 59
12.2 Create, Change and Delete Users ........................................................................................................ 59
12.3 Account Right Configuration............................................................................................................... 60
13 Basic ................................................................................................................................................... 62
13.1 System Startup and Maintenance ......................................................................................................... 62
13.2 Backup and Restore ............................................................................................................................. 62
13.2.1 Backup System Configuration Data ......................................................................................... 63
13.2.2 Restore System Configuration Data ......................................................................................... 63
13.3 Manually Trigger the Alarm Output .................................................................................................... 63
13.4 Video Display Settings ........................................................................................................................ 63
13.5 Batch Timing For Devices ................................................................................................................... 63
14 Web Client Login ................................................................................................................................ 64
14.1 Login .................................................................................................................................................... 64
14.1.1 Change the Port of Web Client ................................................................................................ 64
14.1.2 LAN Login ............................................................................................................................... 64
14.1.3 WAN Login .............................................................................................................................. 64
14.1.4 The Download and Installation of Plugins ............................................................................... 65
14.2 Live Preview ........................................................................................................................................ 66
14.3 Record Playback .................................................................................................................................. 69
NVMS-1000 User Manual
1
System
Recommendation
Windows XP
Windows XP professional version (32bit), direct 9.0c.
Microsoft YaHei front need to be installed.
Windows 7
Windows 7 (2bit/64bit，support SP1)，Direct 11.0 or above
Windows8
Windows 8 (32bit/64bit)，Direct 11.0 or above
Item
Recommendation
CPU
Intel Core Dou，2.6GHz or higher
Memory
2GB or above
HDD
250GB or above
Graphics Card
Independent graphics card; 512M graphics memory or higher
1 Software Introduction
In this chapter, you will read a detailed introduction of the operation environment, install &
uninstall of this software.
1.1 Summary
Network Video Monitoring System (hereinafter referred to as ―NVMS-1000‖) is a monitoring client
which is specially designed for network video surveillance. After the network video monitoring
system is well built, the super administrator can control the video input signal devices, such as
cameras, domes, etc., to achieve live monitor, video record and backup by configuring the video
parameters and viewing the live in the control panel. Users can choose the menu to control video
surveillance system in the control panel.
The main functions of the control panel include live view, playback, E-map, device management,
group and scheme settings, user account and permission, local log, basic configuration and alarm
management.
1.2 Operation Environment
1）Operating System Requirement:
2）Hardware Requirement：
3）When running NVMS-1000, you need to ensure that all the running antivirus software and
firewall are closed, so that the program of the NVMS-1000 can be installed.
NVMS-1000 User Manual
2
1.3 Install and Uninstall
1.3.1 Install the Software
Double click ―setup.exe‖ to enter the
Installation Wizard. Click【Next】to install.
Select ―I accept the terms of the license
agreement‖ and click 【Next】to continue.
Click 【Change】 button to change the directory
to save the program files. Click【Next】to
continue.
NVMS-1000 User Manual
3
Check ―vcredist_x86‖ and click【Next】to install
this plug-in.
Click【Next】; check ―I have read and accept the license terms‖ and click【Install】to start installation
of vcredist_x86; then click【Finish】to complete installation. Please refer to the below pictures.
Note: If the above plug-in has been installed, please click 【Repair】and click【Next】to repair
software. Click【Finish】button to finish repairing.
NVMS-1000 User Manual
4
Click【Next】to continue.
At last, check ―Create desktop shortcuts‖, and
then click 【 Finish 】 button to complete
installation.
1.3.2 Uninstall the Software
Click ―Start‖ at the bottom of the desktop to
find the shortcut of NVMS-1000 ; then click
―Uninstall‖ to pop up a dialog window; click
【Yes】to uninstall the software.
At last, click【Finish】button to finish uninstall .
NVMS-1000 User Manual
5
2 Login Software
2.1 Login
First time to login:
① For the first time to run the NVMS-1000, you
need to register a super administrator. You
shall self-define the username and password.
② To avoid forgetting the password, you can set
some questions to help you find the password
quickly.
③ After you input your user name, password and
set the questions and answers, click【Register】
to register the super administrator.
Input the username and password created by you.
Click 【Login】to enter into the software.
If checking ―Remember Password‖, there will be
no need to input password when you log in next
time.
If checking ―Auto Login‖, it will automatically log
in as current user next time.
Successful login for first time:
After successful login, a window will pop up. Check the partition for storing record files and click
【OK】to save the settings.
NVMS-1000 User Manual
6
Area
Description
Area
Description
1
Function Area
2
Tab Bar—to display the operated functions
3
Menu Bar
4
Alarm Information List.
5
Status information list
Menu
Description
Start
Export the control panel, live preview, playback tab and lock or exit the client.
View
Export the live preview, control panel, local log, E-map, alarm preview, playback,
user account and permission, basic configuration and device management and
organize the live view.
System
Including lock client， broadcast to device, switch user, import or export
configuration, etc.
Help
View user manual and software version.
2.2 Control Panel Instruction
The control panel of NVMS-1000 is shown as below:
There are five areas in the main interface of this software. The descriptions of each area are as
follows：
Description of Menu Bar
NVMS-1000 User Manual
7
Menu
Description
Live Preview: To view live images and record, snap, control PTZ, etc.
Playback: To remotely play the local record.
E-map: To manage and display maps, hot zones and hot spots. To operate
E-maps – zoom in/out e-maps, view hot zones and hot spots, display alarm
information on the map.
Device Management: To create, modify or delete areas, devices and cameras.
Group and Scheme Settings: To create, modify or delete camera groups and
schemes.
User Account and Permission: To add, modify, delete user and user permission.
Local Log: To search, view and backup local log.
Basic Configuration: To setup record partition and path, system startup and
maintenance & backup and restoration.
Alarm Management: To add or remove the sensor of the area; To setup alarm
trigger and modify the area of the sensor.
Button
Description
Click to hide the window.
Click to zoom in/out the window.
Click to exit the window.
Click to extend or shrink the window (eg. Extend or shrink the list of alarm
information list).
Descriptions of Function Module
Descriptions of Other Buttons
NVMS-1000 User Manual
8
3 Device Management
In the control panel, click icon to enter the device management interface.
3.1 Add Device
Click button to enter into the
interface.
Select device type and input device name;
Input IP address or domain, port of the
device, then input its user name and
password;
Select an area. If you haven’t created area
before, you can click ―Create a New Area‖
to create;
Note: You can click ―Create an Area‖ shortcut
menu under Device to create an area in the
control panel.
Check ―Use the master stream‖ according to the actual network situation. Checking or not
checking it will affect the stream choice of live preview.
NVMS-1000 User Manual
9
You can also check ―Auto report‖ to add device.
The setting steps are as follows:
Choose the device type and check ―Auto
report(Port 2009)‖.
Input device name.
If you want to add DVR, please enter
NetworkSever tab from device. Check
―Enable‖, input IP address and port(2009) of NVMS-1000 & device ID.
If you want to add IP camera, please enter Network Configuration Server Configuration.
Check ―Do you want IP camera to connect server‖ and input NVMS-1000 Address, Port and
Device ID.
Input the Device ID according to the device ID of DVR or IP camera device.
Click【OK】button to save the settings and add the device.
Add Online Devices
Click button to automatically
search online devices in the local network.
Click a device to display its basic information.
Double click it to add it.
If the device is added, this device will be hidden
in the search device interface.
3.2 View, Change or Delete Device
Select the added device and click
button to delete the device from the list.
Select the added device and click to
pop up a window.
In this interface, you can change the device
name, address, port, etc, or change basic
configuration, time configuration, DDNS
configuration and Email configuration, etc, you
can also query the inline users.
NVMS-1000 User Manual
10
Change the Device Name
Click “Change Device Name” to change the
name of selected device.
Change Device Address
Click “Change Device Address” to change the
IP address of selected device.
Change Device Port Number
Click “Change Device Port Number” to
change the port of selected device.
Change Device User Name
Click “Change Device User Name” to change
the device account name.
Change Device Password
Click “Change Device Password” to change
device password.
Change Connection Bandwidth
Check “Use the master stream” according to
the actual situation.
Note: Checking or not checking it will affect
the stream choice of live preview.
NVMS-1000 User Manual
11
Change Basic Configuration
Click “Change Basic Configuration” to pop up
a dialog box. You can change the basic
configuration of device and check ―Permission
Check‖ or ―Record Coverage‖ according to the
actual situation.
Change Time Configuration
Click “Change Time Configuration” to enter
the interface. Change the time and date if you
need.
Check ―Sync Time with NTP Server‖ to
synchronize with NTP server.
View Device Log
Click “View Device Log” to enter the interface.
Choose the type of system logs; enter start time
and enter time to search the log information of
the device.
View Disk Information
Click “View Disk Information” to check the
detail information of disk from the list.
NVMS-1000 User Manual
12
Change Network Configuration
Click “Change Network Configuration” to
enter the interface. You can change HTTP port,
Server port; network address, etc.
Note: If changing the port and IP address there,
the network will disconnect. Then you need to
accordingly change the port and IP address of
the device connecting the NVMS-1000.
Alarm Input Trigger and Schedule Configuration
Click “Alarm Input Trigger and Schedule
Configuration” to enter the interface. Select a
sensor corresponding to the alarm input; choose
a type and holding time for it. You also can set
trigger alarm or other configurations.
Alarm Output Configuration
Click “Alarm Output Configuration” to enter
the interface. Select an alarm output and
holding time; then edit a name for it. You can
enable buzzer alarm and set a time for it.
NVMS-1000 User Manual
13
Abnormal Alarm Configuration
Click “Abnormal Alarm Configuration” in to
enter the interface. Choose the alarm type
according to your need. Enable ―Buzzer Alarm‖
and select alarm out.
User Information Management
Click “User Information Management”
shortcut to enter the interface. You can check
the information of user who is logging in the
device.
Email Configuration
Click ―Email Configuration‖ to enter the
interface. You can configure the basic
parameters of Email.
DDNS Configuration
Click ―DDNS Configuration‖ to enter. You can
configure the basic parameters of DDNS.
NVMS-1000 User Manual
14
Check Online Users
Click ―Check Online Users‖ to enter the
interface. In this interface, you can see the
number of online users.
3.3 Area and Camera Management
In the control panel, click ―Change Camera Settings‖ under Device to enter the interface. You can
modify or delete the area and manage the cameras. Select a camera you want to setup as shown on
the below figure.
The camera without some functions will not display relative sheets and links. As shown in the
following picture.
NVMS-1000 User Manual
15
3.3.1 Area Management
Click button to create area.
Select an area and click button to
change its name.
Select an area and click button to
delete it.
Select an area and click to
pop up a window.
① Check the camera on the left column and
click button to add the camera to the
area.
② Check the camera on the right column and
click button to remove the camera
from the area.
Select a camera and click
button to modify the area of this camera.
3.3.2 Camera Management
The real-time image will be displayed after selecting a camera. You can setup the parameters of this
camera.
NVMS-1000 User Manual
16
Image Settings
Image settings include image video parameter,
image quality and image display.
Click “Image video parameters” to enter the
interface.
① Adjust the brightness, contrast, saturation
and chroma of the image.
② Clicking 【Restore Default】 button will
restore the above parameters to factory
default settings.
Click “Image Quality” under Image Settings to
enter the interface.
Choose the device stream, resolution, quality,
etc. according to practical situation.
Click “Image Display” to enter the interface.
① Create the camera’s name and set up its
display position on the OSD including the
time stamp.
② Click【Copy to】button to apply the settings
to the selected channel.
Record Settings
Click “Record Settings”, users can set the
record of device, the record of system and the
record of storage.
Under the record of device
① Choose pre-recording time, duration and
record save time.
② Click 【Copy to】 button to save the settings
to the selected channel.
Under the record of system
You can set schedule and record stream.
NVMS-1000 User Manual
17
How to set schedule?
The schedule setting between local record of
device and local record of system is different.
The schedule setting of local record of device is
as follows:
First, you should check the Enable in the
Record of Device interface, then click【Setup】
button to pop up a window at right. Click
button to setup schedule or manually input the
time.
The schedule setting of local record of system
is as follows:
Click 【Set Schedule】 button to pop up the
window at right.
Check ―7x24‖ or ―Create Schedule‖ to set
schedule.
Click icon and move the cursor to select
the time.
Click icon to delete the selected time.
Clicking ―Manually‖ to manually input time
Click ―All‖ / ―reverse‖ to quickly select the
time.
Click ―Empty‖ to clear all the time.
Under the record of storage
Before we begin the record of storage, please
confirm that the right normal storage server
which can be used has been added(You can add
the storage server by clicking ―View or Change
Storage Server Settings‖ in the control
panel).Choose a storage server and then setup record schedule and record stream. The schedule
setup is the same with the local schedule setup. After setup, you should click【Save】button to save
the settings.
NVMS-1000 User Manual
18
Motion Detection Alarm Settings
Click “Area and Sensitivity” under Motion
Detection Alarm Setting to enter the interface.
① Drag slide bar to set the sensitivity value.
The higher the value is, the more sensitive it
is.
② Click ―Erase‖/ ―Add‖, then hold press
―Ctrl‖ and left click mouse to delete /add
the area you want.
③ Click 【All】/【Reverse】/【Clear All】 button to select area or clear all the area quickly.
Click “Set The Motion Alarm” under Motion
Detection Alarm Setting to enter the motion
alarm setting interface as shown at right. User
can set motion alarm and linkage configuration.
Note: Please refer to the user manual of the
device for device linkage configuration.
Click “System Trigger” under Motion Detection Alarm Setting to enter the interface.
Under the system linkage, check ―Trigger to
Play Audio File‖. If the motion alarm of a
certain channel is triggered, there will be given
out a sound like ―beep‖.
Click 【Trigger the Big Screen】 button to
select channel. If the motion alarm of the
selected channel is triggered, a big picture will pop up on the screen.
Click 【Trigger the Record Channel】 button to select channel. If the motion alarm of the selected
channel is triggered, the channel’s record will be opened automatically.
NVMS-1000 User Manual
19
Video Loss Alarm Settings
Click “Video Loss” to enter the interface. The
steps of configuring video loss are same with
the device settings; please refer to the video loss
chapter of device user manual.
Video Loss of System
Click ―Video Loss of System‖ to enter the right
window. You can set the video loss of system.
PTZ Settings
Click “PTZ Protocol Configuration” under
PTZ Settings to enter the interface. You can
enable or disable PTZ. From the Protocol and
Baud Rate drop-down menu, choose a protocol
and a baud rate to associate with the PTZ, and
then input the address of the PTZ connecting
the software.
Click “Preset Point Configuration” under PTZ
Settings to enter the interface. Enable
corresponding preset points and create a new
name in the ―New Name‖ field by selecting the
preset point. Adjust the dome direction, speed,
etc by clicking the buttons. Click 【 Save
Position】to save the current position of the
dome.
Loading...