Avycon AVC-NPTZ51X23L Quick Start Guide
AVC
NPTZ21X12L
5MP MINI PTZ DOME NETWORK CAMERA
QUICK START GUIDE
TABLE OF CONTENTS
Package Contents.....................................................................................................................
Caution......................................................................................................................................
System Requirements...............................................................................................................
Hardware Overview...................................................................................................................
- 12x Mini (PoE) PTZ Dome Network Camera..........................................................................
- Camera Installation..................................................................................................................
How to perform a Hardware Reset...........................................................................................
How to Connect to Alarm Interface.........................................................................................
How to Connect the Waterproof Connector..........................................................................
Accessing the Network Camera...............................................................................................
1
1
1
2
2
3
8
8
9
10
Thank you for purchasing this AVYCON IP Network Camera. This guide provides basic instructions
1 5MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ51X23L1 5MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ51X23L
on installing and accessing this IP Network Camera. For more details, please refer to the User
Manual.
Package Contents
Before installation, please verify that all the necessary items are supplied in the box as the
package contents listed below. If any item is missing or damaged, please contact the shipper
and your Avycon Sales Representative.
DEFAULT
OPTIONAL
ITEMS
Avycon Network Camera 1 Pc The purchased model
Power Adapter
Quick Start Guide
Warranty Card
Lens
Bracket & Screw Pack
QUANTITY DESCRIPTION
1 Pc
1 Pc
1 Pc
DC 12V (Optional for part of devices)
Printed material
Printed material
If purchased
If purchased
Caution
* Do not expose the product to rain moisture
* Make sure the device is firmly fixed when mounting it on the wall or ceiling
* Make sure that the power supply voltage is correct before using ther camera
* Do not use a 3rd party Power Adapter
* Never attempt to disassemble or modify the camera
System Requirements
OPERATING SYSTEM: Windows XP / Vista / 7 / 8 /10 / Server 2000 / Server 2008
CPU: 1.66 Ghz or Higher
RAM: 1G or Higher
Graphic Memory: 128MB or more
Internet Protocol: TCP / IP (IPv4 / IPv6)
Hardware Overview
2 5MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ51X23L
AVC-NPTZ51X23L
Light Sensor
Lens
SD Card Slot
IR LEDs
DC 12V Alarm I/O
Ethernet Port (PoE+)
Audio I/O
NOTE:
1) Reset Button: Hold “Reset” button for 5 seconds, and the device will be restored to factory default
2) DC 12V & PoE (802.3at) are available for Mini PoE PTZ Dome Power Supply.
Camera Installation - Install with Mounting Bracket
3 5MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ51X23L
AVC-NPTZ51X23L
1.
Take the cables out from the side of the PTZ Dome Camera; if needed, loosen the screws
on the bottom of the camera.
DIAGRAM 1
DIAGRAM 1: Before starting the mounting process, make sure that the surface you want to mount the camera onto is able to bear
weight 8x heavier than the camera’s weight and will not weaken during the installation process.
2.
Fix the mounting bracket onto the surface where camera is to be mounted. Using the
included screws or appropriate mounting screws, fix the bracket in. Next, connect all
necessary cables. Finally, rotate and secure camera onto the mounting bracket and
tighten the set screw when the camera is in position.
Mounting Screws
Mounting Bracket
Set Screw
4 5MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ51X23L
Camera Installation - Install with Recessed Mount
AVC-NPTZ51X23L
1.
Ensure that the thickness of the ceiling is less than 1.18in (30mm) then drill a round hole
with a diameter of 8.66 in (220mm). Hold the camera and turn the dome cover clockwise
to take it off.
Dome Cover
2.
Assemble the recessed mount by taking the support plate up and screwing the fixation
plate onto the support. Then position the camera onto the recessed mount and set the
screws in.
Lock Screws
Fixation Plate
Recessed Mount
5 5MP MINI PTZ DOME NETWORK CAMERA | AVC-NPTZ51X23L
Place the camera with the recessed mount attached through the drilled hole until fitted
3.
properly. Using mounting screws, attach the camera securely to the ceiling.
Lock Screws
4.
Attach the cover of the recessed mount and installation is completed.
Mount Cover
Loading...