AVUE AVG19WBV-2D User Manual

User Manual

19” and 22” LCD Monitor

LCD VIDEO MONITOR

SAFETY INSTRUCTIONS…………………………………………………………………….2-3
CAUTION ………………………………………..……………………………………………..4
FCC RF INTERFERENCE STATEMENT …………………………………………………...5
CONNECTING WITH EXTERNAL EQUIPMENT………………………………………….. 6

CONTROLS AND FUNCTIONS…………………………………………………….……......7-16

MOUNTING GUIDE …………………………………………………………….……..…….. 17
D-SUB CONNECTOR PIN ASSIGNMENTS ……………………………………………….18
POWER MANAGEMENT……………………………………………………………………..19
SPECIFICATIONS………………………………………………………………………..……20

.

1 …………………………………………………………………………… INSTRUCTION MANUAL

1. Read all of these instructions.

2. Save these instructions for later use.

3. Follow all warnings and instructions in this manual and on the product.

4. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use
a damp cloth for cleaning.

5. Do not use this product near water.

6. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious
damage to the product or nearby people.

7. Please comply with the following conditions:

A. Allow a minimum distance of 10cm around the apparatus for sufficient ventilation.
B. The ventilation openings should not be impeded by items such as paper, table-cloths,

curtains, etc..

C. No naked flame sources, such as lighted candles, should be placed on the apparatus.
D. Please dispose of all batteries according to local regulations.
E. Use the monitor in moderate climates.

8. This product should be operated from the type of power source indicated on the marking label. If you

are not sure of the type of power available, consult your dealer or local power company.

9. This product is equipped with a 3 wire grounding type plug having a third (grounding) pin. This is a

safety feature. If you are unable to insert the plug into the outlet, contact your electrician to update the
outlet. Do not defeat the purpose of the grounding-type plug.

10. Do not allow anything to rest on the power cord or place this product where people will walk on the
cord.

11. If an extension cord is used with this product, make sure that the total ampere ratings on the products

plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that
the all of the products plugged into the wall outlet do not exceed the rating of the outlet.

12. Never push objects of any kind into this product through cabinet slots as they may touch dangerous

voltage points or short out parts, which could result in the risk of fire or an electric shock. Never spill any
kind of liquid on the product.

13. Do not attempt to service this product yourself, as opening or removing covers may expose you to

dangerous voltage points or other risks. Refer all servicing to trained personnel.

INSTRUCTION MANUAL…………………………………………………………………………… 2

14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the

following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when the operating instructions are followed. Adjust only

those controls that are covered by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to

restore normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating a need for service.

CAUTIONk

The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is
located/installed near the equipment and is easily accessible.

3 …………………………………………………………………………… INSTRUCTION MANUAL

▶ NEVER REMOVE THE BACK COVER

Removal of the back cover should be carried out only by qualified personnel.

▶ DO NOT USE IN HOSTILE ENVIRONMENTS

To prevent electrical shock or a fire hazard, do not expose the unit to rain or moisture. This unit is
designed to be used in the office or home. Do not subject the unit to vibrations, dust, or corrosive gases.

▶ KEEP IN A WELL VENTILATED PLACE

Ventilation holes are provided on the cabinet to prevent the temperature from rising. Do not cover or
place anything on top of the unit.

▶ AVOID HEAT

Avoid placing the unit in direct sunshine or near a heating appliance.

▶ TO ELIMINATE EYE FATIGUE

Do not use the unit against a bright back ground or where sunlight and other light sources will shine
directly on the monitor.

▶ BE CAREFUL OF HEAVY OBJECTS

Neither the monitor itself nor any other heavy object should rest on the power cord. Damage to a power
cord can cause fire or electrical shock.

INSTRUCTION MANUAL…………………………………………………………………………… 4

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the space between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer, an experienced radio, or a TV technician for help.

- Only a shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee
or manufacturer could void the user's authority to operate such equipment.

▶ DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus
set out in the radio interference regulation of Canadian Department of Communications.

This monitor complies with the basic protection requirements of the Electromagnetic Compatibility (EMC)
Directive 2004/108/EC for electrical and electronic equipment imported into the European Union (EU):
The electromagnetic disturbance generated by the apparatus does not exceed the level specified in the
harmonized EMC Standards for this type of apparatus. It has a level of immunity to the electromagnetic
disturbance to be expected in its intended use, and should operate without unacceptable degradation of

its specified performance.

5 …………………………………………………………………………… INSTRUCTION MANUAL

Bottom and Side Panel Control

1. Audio In

2. Audio Out

3. BNC Out

4. BNC In

5. VGA

1

2

3

5

4

Back View of Monitor

A. Connector Panel

INSTRUCTION MANUAL…………………………………………………………………………… 6