Page 1
4 Microphone Wireless Systems
for Professional Series Models:
AVT-QUAD1
AVT-QUAD2
AVT-QUAD2B
(AVT-4BP1 and AVT-4BP2 Beltpack Transmitters)
Sistema de 4 micrófonos inalámbricos
USERS MANUAL
Page 2
* * * CONSUMER ALERT * * *
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions: the system
may not cause harmful interference; it must operate at a low power level (not in excess of 50 mil-
liwatts); and it has no protection from interference received from any other device.
www.fcc.gov/cgb/wirelessmicrophones.
The manufacturer, distributor, and supplier is not responsible for any radio or TV interfer-
FCC INFORMATION
TRANSMITTER SPECIFICS
2
Page 3
FEATURES AND SPECIFICATIONS LIST
AVAILABLE MODELS
3
Page 4
HELPFUL DIAGRAMS
4
Page 5
CAUTION!
Do not disassemble, remove screws, or otherwise in any way open the
Keep receiver and transmitters away from water including rain and moisture.
Make sure there are no breaks in the A/C power cable.
Make sure the switch is to the off position when you turn on the unit.
Do not use this device in the rain, swimming pools or in moist damp
frequency
PRECAUCIÓN
5
Page 6
working then check the batteries in the
GETTING STARTED
cable to the sound board.
If you want the sound technician to be able to adjust each channel individually on your
output you must adjust (mix) your volume levels on
TROUBLE SHOOTING
6
Page 7
CÓMO CONECTAR EL EQUIPO
al sonido de la consola de sonido.
Si usted quiere que su técnico de sonido pueda ajustar cada canal individualmente
XLR, no la salida de
LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS
7
Page 8
Loading...