AV TOOL VS-612 Instruction Manual

Instruction Manual

Video to HDMI Up Converter

VS-612

Table of Contents

1.0 Introduction 2

2.0 Specifications 4

3.0 Checking Package Contents 5

4.0 Connecting the Hardware 5

5.0 Operating the Unit 7

6.0 Troubleshooting 7

7.0 Limited Warranty 7

8.0 Regulatory Compliance 8

9.0 Contact Information 9

1.0 INTRODUCTION

Thanks for purchasing this product from the AV Toolbox Division of TV One. The
VS-612 Video to HDMI Up Converter is designed to convert analog Composite or
S-Video signals to digital HDMI signals. It will also embed an analog stereo

audio signal into the HDMI digital steam. Extensive noise reduction techniques
are employed as well as automatic restoration of lip sync via an audio delay
circuit. A motion adaptive 3D Y/C separation comb filter, advanced 3D motion
adaptive de-interlace and automatic 2:2/3:2 film mode detection are among the

other features offered by the VS-612.

1.1 Liability Statement

Every effort has been made to ensure that this product is free of errors. TV One
cannot be held liable for the use of this hardware or any direct or indirect
consequential damages arising from its use. It is the responsibility of the user of
the hardware to check that it is suitable for his/her requirements and that it is

installed correctly. All rights reserved. No parts of this manual may be
reproduced or transmitted by any form or means electronic or mechanical,
including photocopying, recording or by any information storage or retrieval
system without the written consent of the publisher.

TV One reserves the right to revise any of its hardware and software following its
policy to modify and/or improve its products where necessary or desirable. This

statement does not affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognised. The TV One logo, AV

Toolbox logo, TV One-task and CORIO are the registered Trademarks of TV
One. All other trademarks are the property of their respective holders.

Features

 HDMI 1.3 support deep color 12 bit, HDCP 1.1, DVI 1.0 compliance
 Supports both NTSC and PAL Formats
 Up Converts Composite Video or S-Video to HDTV 1080p format

 Automatic lipsync (audio delay) ensures audio/video synchronization
 8/10/12 bit deep color support for HDMI output
 EDID support for automatic monitor resolution selection
 HQE (High Quality Image enhancer) function

 Digital Noise Reduction
 Block Noise Reduction
 MPEG Noise Reduction
 Motion adaptive 3D Y/C separation comb filter

 3D (frame based) motion adaptive noise reduction
 Advanced 3D motion adaptive de-interlace
 Automatic 2:2/3:2 film mode detection

2