Avtomationdirect C-more User Manual
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Operator Panels Overview
Getting started
Installing the software and configuring the
C-more panel is simple. You will need the
following to successfully connect, configure and
send a project to the panel:
• C-more HMI - 6in, 7in wide, 8in, 10in,
10in wide, 12in, 15in or EA9-RHMI
• C-more Programming Software,
p/n EA9-PGMSW
• C-more programming cable, USB or Ethernet
• 12-24 VDC switching power supply or the optional
C-more AC Power Adapter, p/n EA-AC
• Personal Computer - to run C-more
programming software
• PLC communications cable (serial or Ethernet) to
connect the C-more HMI to your controller
Part Number Description Price
EA9-T6CL-R
EA9-T6CL
EA9-T7CL-R
EA9-T7CL
EA9-T8CL
EA9-T10CL
EA9-T10WCL
EA9-T12CL
C-more EA9 series touch screen HMI, 6in color TFT LCD, 320 x 240
pixel, QVGA, LED backlight, supports (1) serial and (2) USB ports and
(1) memory card slot.
C-more EA9 series touch screen HMI, 6in color TFT LCD, 320 x 240
pixel, QVGA, LED backlight, supports (3) serial, (1) Ethernet and (2)
USB ports, (1) memory card slot and (1) audio line out.
C-more EA9 series touch screen HMI, 7in color TFT LCD, widescreen,
800 x 480 pixel, WVGA, LED backlight, supports (1) serial, (1) Ethernet
and (2) USB ports and (1) memory card slot.
C-more EA9 series touch screen HMI, 7in color TFT LCD, widescreen,
800 x 480 pixel, WVGA, LED backlight, supports (3) serial, (1) Ethernet
and (2) USB ports, (1) memory card slot and (1) audio line out.
C-more EA9 series touch screen HMI, 8in color TFT LCD, 800 x 600
pixel, SVGA, LED backlight, supports (3) serial, (1) Ethernet and (2)
USB ports, (1) memory card slot and (1) audio line out.
C-more EA9 series touch screen HMI, 10in color TFT LCD, 800 x 600
pixel, SVGA, LED backlight, supports (3) serial, (1) Ethernet and (2)
USB ports, (1) memory card slot and (1) audio line out.
C-more EA9 series touch screen HMI, 10in color TFT LCD, widescreen, 1024 x 600 pixel, WSVGA, LED backlight, supports (3) serial, (1)
Ethernet and (2) USB ports, (1) memory card slot and (1) audio line out.
C-more EA9 series touch screen HMI, 12in color TFT LCD, 800 x 600
pixel, SVGA, LED backlight, supports (3) serial, (1) Ethernet and (2)
USB ports, (2) memory card slots, (1) HDMI video out and (1) audio
line out.
$534.00
$748.00
$499.00
$578.00
$1,069.00
$1,380.00
$733.00
$1,917.00
EA9-T15CL-R
EA9-T15CL
EA9-RHMI
EA9-PGMSW
USB-CBL-AB3
USB-CBL-AB6
USB-CBL-AB10
USB-CBL-AB15
C-more EA9 series touch screen HMI, 15in color TFT LCD, 1024 x 768
pixel, XGA, LED backlight, supports (1) serial, (1) Ethernet and (2) USB
ports and (2) memory card slots.
C-more EA9 series touch screen HMI, 15in color TFT LCD, 1024 x 768
pixel, XGA, LED backlight, supports (3) serial, (1) Ethernet and (2) USB
ports, (2) memory card slots, (1) HDMI video out and (1) audio line out.
C-more EA9 series headless HMI, supports (2) serial, (1) Ethernet, (2)
USB ports and (1) HDMI audio/video out and (1) memory card slot.
C-more Windows programming software, CD or free download. For
use with C-more EA9 series touch panels. Requires USB or Ethernet
connection to touch panel.
Programming cable, USB A to USB B, 3ft cable length. For use with
C-more HMIs, Do-more and Productivity series CPUs and most USB
devices.
Programming cable, USB A to USB B, 6ft cable length. For use with
C-more HMIs, Do-more and Productivity series CPUs and most USB
devices.
Programming cable, USB A to USB B, 10ft cable length. For use with
C-more HMIs, Do-more and Productivity series CPUs and most USB
devices.
Programming cable, USB A to USB B, 15ft cable length. For use with
C-more HMIs, Do-more and Productivity series CPUs and most USB
devices.
$1,391.00
$2,140.00
$409.00
$11.00 on CD,
or FREE download
$8.50
$11.00
$25.50
$29.00
www.automationdirect.com
Operator Interface
tCME-1
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more Selection Guide & Specifications
Model
Specification
Part Number
Price
Display Actual Size
and Type
Display Viewing Area
Weight
Screen Pixel
Display Brightness
LCD Panel Dot Pitch
Color Scale
Backlight Average Lifetime*
Touch Panel Type**
Project Memory
Number of Screens
Realtime Clock
Calendar –
Month / Day / Year
Serial Port 1
Serial Port 2
Serial Port 3
USB Port – Type B
USB Port – Type A
Ethernet Port
Ethernet Port -
Expansion Module
Audio Line Out
Mic In (Future)
SD Card Slot
HDMI Video Out
HDMI Supported Resolution
Supply Power
Power Consumption
Internal Fuse
(non-replaceable)
Altitude
Operating Temperature
Storage Temperature
Humidity
Environment
Noise Immunity
Withstand Voltage
Insulation Resistance
Vibration
Shock
Emission
Enclosure
Agency Approvals
NOTES: *The backlight average lifetime is defined as the average usage time it takes before the brightness becomes 50% of the initial brightness. The lifetime of the
backlight depends on the ambient temperature. The lifetime will decrease under low or high temperature usage.
**The touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same time, an unexpected object may be activated.
6” TFT color
w/ base features
EA9-T6CL-R EA9-T6CL EA9-T7CL-R EA9-T7CL
$534.00 $748.00 $499.00 $578.00
5.7” TFT color 7.0” TFT color
4.54” x 3.40”
[115.2 mm x 86.4 mm]
1.56 lb [710g] 1.59 lb [720g] 1.46 lb [660g] 1.48 lb [670g]
320 x 240 (QVGA) 800 x 480 (WVGA)
280 nits (typ) 350 nits (typ)
0.18 mm x 0.18 mm 0.190 mm x 0.190 mm
N/A 3-wire terminal block – RS-485 N/A 3-wire terminal block – RS-485
N/A RJ-12 modular jack – RS-232C N/A RJ-12 modular jack – RS-232C
USB 2.0 High speed (480 Mbps) Type B – Download/Program – Max. cable length 15-feet
USB 2.0 High speed (480 Mbps) Type A – for USB device options – Max. cable length 15-feet – Bus Power – Less than 200mA at 5VDC
N/A 10/100 Base-T, auto MDI/MDI-X
N/A EA-ECOM N/A EA-ECOM
N/A
N/A 3.5 mm mini jack
or use the AC/DC Power Adapter, EA-AC, to power the touch panel from a 100-240 VAC, 50/60 Hz power source. Reverse Polarity Protected
0 to 50°C (32 to 122°F) Maximum surrounding air temperature rating: 50°C (122°F) IEC 60068-2-14 (Test Nb, Thermal Shock)
(EN61131-2), EN61000-4-2 (ESD), EN61000-4-3 (RFI), EN61000-4-4 (FTB), EN61000-4-5 (Serge), EN61000-4-6 (Conducted)
NEMA 250 type 4/4X indoor use only UL50 type 4X indoor use only
IP-65 indoor use only (When mounted correctly)
UL508, E157382, Class 1, Div 2, Groups A, B, C
10.2-26.4 VDC Class 2 or SELV (Safety Extra-Low Voltage) Circuit or Limited Energy Circuit (LEC),
CE (EN61131-2), RoHS (2011/65/EU)
CUL Canadian C22.2
6” TFT color
w/ full features
65,536 colors
50,000 hours @ 25°C
Four-wire analog resistive, single touch
26MB
Up to 999 screens – limited by project memory
Realtime clock built into panel, backed up for 30 days at 25°C
Yes - monthly deviation 60sec (Reference)
15-pin D-sub female – RS232C, RS-422/485
3.5 mm mini jack – requires amplifier
and speaker(s)
1 slot supports max 2GB (SD,) max 32GB (SDHC)
N/A
N/A
16.0 W
1.30 A @ 12VDC
0.66 A @ 24VDC
4.0 A
Up to 2000m (6562ft)
–20 to +60°C (–4 to +140°F) IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat) IEC 60068-2-14 (Test Na, Thermal Shock)
5-95% RH (non-condensing)
For use in Pollution Degree 2 environment, no corrosive gases permitted
EN61000-4-8 (Power frequency magnetic field immunity)
RFI, (145MHz, 440Mhz 10W @ 10cm), Impulse 1000V @ 1µs pulse
1000VAC, 1min. (FG to Power supply )
> 10M ohm @ 500VDC (FG to Power supply )
EN55011 Class A (Radiated RF emission)
(Local Test)
IEC60068-2-6 (Test Fc)
IEC60068-2-27 (Test Ea)
7” TFT color
w/ base features
[152.4 mm x 91.4 mm]
N/A
N/A 3.5 mm mini jack
NEMA 250 type 4/4X indoor use only UL50 type 4X indoor use only
IP-65 (not tested by UL) (When mounted correctly)
UL61010, E157382
CE (EN61131-2), RoHS (2011/65/EU)
CUL Canadian C22.2
6.00” x 3.60”
7” TFT color
w/ full features
3.5 mm mini jack – requires
amplifier and speaker(s)
www.automationdirect.com
Operator Interface
tCME-2
U
C
US
1-800-633-0405
For the latest prices, please check AutomationDirect.com.
C-more 7” TFT Color Touch Panel - Base Model
EA9-T7CL-R
C-more EA9 series touch screen interface panel, 7-inch color TFT (7.0 inch viewable
screen), 64K colors, 800 x 480 pixel WVGA screen resolution, 800MHz CPU, 12-24 VDC
powered, NEMA 4/4X, IP65 (when mounted correctly; for indoor use only)(not tested by UL),
non-replaceable LED backlight. Includes (1) serial port, USB 2.0 Type A and B ports and
Ethernet port; supports SD memory card. Compatible with EA9-PGMSW programming software version 6.3 or later.
Features
• 7.0” diagonal color TFT (Thin Film Transistor)
LCD display with 64K colors
• 800 x 480 pixel resolution
• 350 NITS display brightness
• 50,000 hour average backlight half-life
• Analog resistive (1024 X 1024) touch screen
allowing unlimited touch areas
• USB port B (program/download) and
USB port A (USB device options)
• Ethernet 10/100 Base-T port
(program/download & PLC
communication)
• Remote Internet access
• Serial PLC interface (RS-232/422/485)
• One built-in SD memory card slot
• 12–24 VDC powered, 110VAC power adapter
(optional)
• 26MB project memory
• Data logging
• 0 to 50°C [32 to 122°F] operating
temperature range
• NEMA 4/4X, IP65(not tested by UL) when
mounted correctly, indoor use only
• Slim design saves panel space
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
Function Available
Ethernet Yes
USB Yes
SD Card Yes
Audio Out No
HDMI Video Out No
Expansion Module No
L
R
$499.00
Dimensions
inches [mm]
See our website www.AutomationDirect.com for
complete engineering drawings.
Mounting Cutout
www.automationdirect.com
Operator Interface
tCME-8
1-800-633-0405
C-more Communication Ports
For the latest prices, please check AutomationDirect.com.
Port 2
Serial Communication
RS-485
RJ12 Serial Communication
1 0V
N.C.
2
RXD
3
TXD
4
N.C.5
0V6
TXD (232C)
RXD (232C)
N.C.
RS-232C
Pin Signal
Pin Signal
1 Frame GND
2
3
4
5 Logic GND
+
–
Logic Ground
Port 3
1 6
Pin Signal Pin Signal
6 LE (for DH485)
CTS (232C)
7
RTS (232C)
8
RXD+ (422/485)
9
10 RXD– (422/485)
Note: Device is not available on Base Feature touch panel EA9-T6CL-R
Note: Device is not available on Base Feature touch panels EA9-T7CL-R and EA9-T15CL-R
Note: Device is only available on touch panels EA9-T12CL and EA9-T15CL.
Note: Device is only available on touch panels EA9-T12CL, EA9-T15CL and EA9-T15CL-R.
Port 1
PLC Serial Communications
RS-232C / RS-485
8 1
15 9
11 TXD+ (422/485)
TXD– (422/485)
12
Term. Resistor
13
N.C.
14
15 N.C.
Pin Signal
1 TD+
2
3
4
Link Status LED (Green)
On Ethernet Linked
No Ethernet Comm.Off
Blinking
Comm. Activity
Green
Ethernet 10/100 Base-T
PLC Communications,
Programming/Download
Pin Signal
5 do not use
TD–
RD+
do not use
6
7
8
1 8
RD–
N.C.
N.C.
Network Speed LED (Yellow)
On 100M
10MOff
SD Card Slot 1
Pin Signal
USB Port - Type A
USB Device Options
Pin Signal
4
1 Vbus
3
21
D–
2
D+
3
GND
4
ShieldSHELL
Expansion Port
SD Card Slot 2
USB Port - Type B
Programming
1 N.C.
D–
2
D+
3
GND
4
ShieldShell
HDMI Port Video Out
1
2
3
4
Ethernet Port
The Ethernet port has several uses:
• Download program to panel
• Communicate to PLCs/PCs
• Send e-mail
• Access FTP server
• Act as a Web server
• Remote Internet access
The Ethernet port has an RJ-45 8-wire modular
connector with green and yellow LEDs.
• The yellow LED indicates network speed – off
for a 10 Mbps connection and
illuminated for a 100 Mbps connection.
• The green LED indicates link status and illuminates when a link is established.
Note: EA6-T6CL-R does not include an
Ethernet port, and does not have these capabilities.
Expansion Port
The expansion port supports the EA-ECOM
module to provide a second Ethernet Port for
all full featured models.
www.automationdirect.com
USB Port B
Program C-more via the USB programming
port. It’s fast and easy, with no baud rate
settings, parity, or stop bits to worry about.
We stock standard USB cables for your
convenience. USB Port B can be used to
upload or download projects to and from
a PC.
USB Port A
The Universal Serial Bus (USB) Port A is a
standard feature on all models and can be
used to connect various USB HID (Human
Input Device) devices to the panel, such as
the following:
• USB flash drives (USB-FLASH)
• USB keyboards
• USB barcode scanners
• USB card scanners
C-more can log data to the USB flash drive
as well as load projects to the panel from the
pen drive. You can also back up project files
and panel firmware.
Sound Interface
(Audio Line Out)
When attached to an amplifier and
speaker(s), C-more can play warning
sounds or pre-recorded messages such
as: “conveyor is jammed”. C-more
supports WAV type files. The output
is stereo.
Serial Port
Port 1 - Connect to your serial controller
network via Port 1. Port 1 is a 15-pin port
that supports RS-232 or RS-422/485.
Port 2 - Connect your RS-485 network via
Port 2. Port 2 is provided with a 3-wire
removable terminal block.
Port 3 - Connect to your RS-232C device via
Port 3. Port 3 is an RJ12 connection.
HDMI Video Out
EA9-T12CL and EA9-T15CL include an
HDMI Type A port to provide video output to
a projector or remote monitor.
Operator Interface
tCME-16
Loading...