Avtex W153D, W193D User Manual

TFT-LCD TV

READ CAREFULLY BEFORE OPERATION

USER MANUAL

W153D

Before connecting the AC power cord to the DC adapter outlet ,make sure the voltage designation of the LCD TV corresponds to the local electrical supply . If you are unsure of your power supply , ask your local power company .

Never insert anything metallic into the cabinet openings of the LCD TV; otherwise may cause the danger of electric shock.

To avoid electric shock, never touch the inside of the LCD TV / adapter. Only a qualified technician should open the case of the LCD TV/adapter.

Never use your LCD TV/adapter when the power cord has been damaged . Make sure there is nothing resting on the power cord, and keep the cord away from places where people can trip over it .

Be sure to hold the plug, not the cord when disconnecting the adapter from an electric socket.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

TO PREVENT ELECTRICAL SHOCK.

DO NOT REMOVE THIS COVER. NO

USER- SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol indicates

dangerous voltage inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

Please read this manual carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Openings in the LCD TV/adapter cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD TV on a bed ,sofa ,rug, or other soft surface. As this, may block the ventilation openings in the bottom of the cabinet. If you put the LCD TV in a bookcase or some other airless space, be sure to provide adequate ventilation.

Do not expose the LCD TV to extreme temperature conditions or to extreme humidity conditions.

The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus.

Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or chloride-these may damage the panel.

Locate your DC adapter near an easily accessible AC outlet.

If your LCD TV does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center.

High temperature can cause problems. Don t use your LCD TV in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the DC adapter when it is going to be left unused for a long time .

To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

If the LCD TV is broken, do not try to repair it yourself. Contact qualified service personnel.

Unplug your DC adapter from the AC outlet before any service.

Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shock, or other hazards.

Following any service or repair, be sure the service technician performs safety checks to certify that your TFT-LCD TV is in a safe operating order.

The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

IMPORTANT SAFETY INSTRUCTIONS

CONTENT

AV, SCART and YPBPR SETUP

Video setting menu

EXTERNAL EQUIPMENT

Connecting diagram

LET'S START

Changing source operation

REMOTE CONTROL HANDSET

Remote buttons

Battery installation

PANEL BUTTON FUNCTIONS

Panel control

Rear panel

INSTALLATION

Normal installation

TELETEXT FUNCTION

Teletext function

TV MENU SETUP

Picture

Sound

TV setup OSD setup

Function

VGA SETUP

Picture

Sound

Monitor setup

OSD setup

Function

DVD OPERATION

Brief introduction to DVD

Features

Compatible disc types

Volume control

Playback

Play/pause playback

Information 27 DVD menu playback 27

CONTENT

DISPLAY MODE

Display mode

SPECIFICATIONS

Specifications

TROUBLE SHOOTING

DVD troubleshooting

Display troubleshooting

Sound and TV troubleshooti ng

DVD FUNCTION SETUP

General setup

Video setup

Audio setup

Password setup

Preference setup

Usage of USB equipment

CARD READER A ND USB OPERATIO N

Headphone enjoying

Fast playback

Repeat playback of selected segment

Zooming the displayed frame

MPEG4 and JPEG file playing

PBC playback

Direct play

Memory

Repeat playback

Select language/audio

DVD OPERATION

VCD, SVCD menu playback

Select track to play directl y by number buttons

Play from the desi red posit ion

DVB FUNCTION SETUP

General setup

Advanced setting

Channel manage

Electronic program guide

System info

Program information

MHEG5

1, Hook the tache ( label ed A)of the kickstand onto the plate (labeled C).

2, Tighten the screws ( M4 10) through the ostium (labeled B).

3, Figure shows the finished installation. The kickstand can rotate 15 -degree.

Kickstand

Ostium

INSTALLATION

NORMAL INSTALLATION

M4 10 Screw 1pcs

Hook

Rear viewing of LCD TV

PANEL BUTTON FUNCTIONS

Indicator( )Indicator is red when in standby mode, green when working normally.

IR sensor window

Front panel

CH+/- (Increase or decrease channel number)

VOL+/-(Increase or decrease volume)

SOURCE (Enter to exit source menu)

SETUP (Enter or exit setup menu)

STANDBY (To switch between standby mode and power-on mode)

Left panel

Headphone jack

Right panel

Disc in/out door

(Stop button)

(Eject button)

(Play/puase button)

PANEL CONTROL

POWER(Turns on or off the power supply).

USB 1 jack

1 2

3 4

6 7

10 11 12

MEDIA CARD socket

PANEL BUTTON FUNCTIONS

REAR PANEL

YPbPr or YCbCr input terminal

SCART input terminal

12V DC input terminal

Coaxial digital audio output

PC audio input

R input terminal

SCART

COAXIAL

VIDEO

VGA input terminal

Composite video/audio input

SCART

COAXIAL

VIDEO

DVD or VCR pl ayer

EXTERNAL EQUIPMENT

NOTE

CONNECTING DIAGRAM

You should connect the interconnecti ng cables BEFORE plugging in the power cord.

Power amplifier (with coaxial d igi tal aud io i n)

R cable

REMOTE CONTROLLER

REMOTE BUTTONS

EJECT

Disc in/out in DVD.

Number button

To select program number.

OK button

To confirm the selections.

INDEX/PAGE+

To display main content page when display the teletext in TV; Browse the next page of favorite table in DTV.

SUBPAGE/PAGE-

To display the subpage of the teletext in TV; Browse the previous page of favorite table in DTV.

REVEAL/EPG

Display the hidden teletext information;

in DTVTo display the program guide .

ZOOM/CYAN

To zoom in or zoom out the picture in DVD; Teletext CYAN button in TV/DTV.

DTV/DVD SETUP

Enter or exit setup menu.

EXIT

To exit current menu except MUTE menu.

LANG/NICAM

Switch in NICAM,A2 and mono channel (It is effective in TV signal input with NICAM or A2 function); To switch the output language in DVD.

DVD/USB/CARD

To directly switch to DVD source at other source or switch between the USB mode, card reader, and DVD mode in DVD source .

1 2

16 17

20 21

Long press(more than 3 seconds) the button to start auto scan in TV/DTV.

TUNE/AQT

CHANNEL+/-

To increase or decrease program number in TV/DTV.

To play normally or pause playing in DVD .

[ ] button

To fast-forwards DVD playback in DVD .

[ ] button

To select the next chapter or track in DVD.

Left/Right cursor(menu adjustment )

To move leftward/ rightward or adjust the selected item in the menu, or adjust sound volume (invalid in DVD and DTV).

HOLD/INFO

To hold teletext on current page in TV; To display the current playing program information in DVD/DTV.

REPEAT/YELLOW

To repeat playback in DVD; Teletext YELLOW button in TV/DTV.

RETURN

To exchange channel between the previous program and the current program in TV/DTV .

FAVORITE/Q-PLAY

Display your favorite channel list in DTV; Play DVD directly in DVD .

TUNE

AQT

REMOTE CONTROLLER

SOURCE

To select input source: ANALOGUE TV, DIGITAL TV, DVD, AV, SCART, YP

BPR and VGA.

UP/DOWN cursor

To select upward/downward in the menu or change the channel in TV/DTV .

To display TV image and teletext simultaneously;Selects the subtitle language in DVD /DTV.

MIX/SUBT

Volume +/-

To increase or decrease sound volume.

To play from a certain time point in DVD ; Teletext RED button in TV/DTV.

GOTO/RED

24 25

TEXT/MENU

To enter or exit from teletext in TV/DTV ; To display DVD Root menu in DVD .

A-B/GREEN

To segment repeat in DVD; Teletext Green button in TV/DTV.

TV SETUP

To display system menu.

STANDBY

To switch between standby mode and poweron mode.

34 35

[ ] button

To fast backward playback in DVD.

TWO-DIGIT NUMBER BUTTON

To switch between one or two-digit program number.

[ ] button

To select the previous chapter or track in DVD.

MUTE

Sound mute switch.

DTV

To directly switch to DTV source at other sources.

CANCEL/AUDIO

To cancel teletext in TV; To change the audio language and sound track in DTV.

[ ] button

To stop playing in DVD .

To directly switch to TV source at other sources.

SIZE/TV/

To magnify teletext page;To switch between

TV and Radio modes in DTV .

REMOTE CONTROLLER

Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of

the battery to the -/+ marks inside the battery compartment, as in the following figure:

BATTERY LIFE

Generally speaking, the battery may be used for one year, but the battery life is also related to the usage times and remote controller operation.

If the remote controller is still not operating when very near to the remote sensor window, please replace the battery.

Please use SUM-4(AAA) battery.

NOTES

Never use rechargeable battery.

Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.

Pay attention not to fall or knock the remote controller, which may cause damage or function failure to it.

Do not use new and old battery together.

If electrolyte splashes into body, please clean it with water.

CAUTION

Please put the battery in a place children cannot access. If swallowed by accident, please contact your local doctor immediately.

BATTERY INSTALLATION

When not using the remote controller for a long time, please take out the batteries to avoid liquid leakage. Before replacing new batteries, please clean the electrolyte in the remote controller.

Please confirm whether the accessories contain the power adapter.

Please make sure to use power adapter within the specification range, otherwise it will cause damage.

POWER SUPPLY

Use the car adapter in the accessories, connect one end to the socket in you car, the other to the DC socket in the TV.

The input voltage of the car adapter should be 12Volts.

LET'S START

You can change the input source by using the source Menu. Press [SOURCE] button or

[SOURCE] key to show the menu as follows:

The current source item is highlighted. Press [ ] button on the remote control or [ CH+

/CH- ] key to select the source you want, Press [ ] button, [VOL+/VOL-] key or [OK]

button to confirm your choice .

CHANGE SOURCE OPERATION

ANALOGUE TV DIGITALTV DVD AV SCART YPBPR VGA

STANDBY

After this unit is well fixed on the desk or on the wall, and the cords are well connected

for input and output, what you should do next is:

Firstly, connect the adapter to the LCD TV, and turn on the power switch then the unit will go

into standby mode, you can see the indicator turn red.

Secondly, press [STANDBY] key on the left side of the LCD TV or [STANDBY] button on the

remote control to make the unit switch into working mode, and you will see the indicator turns

green. Now you can enjoy all exciting features of the whole new product.

INDICATOR

STANDBY

Power switch

Item

BRIGHTNESS

To adjust brightness.

CONTRAST

To adjust contrast.

SATURATION

To adjust color saturation.

This product can store up to 100-channel programs (0 99).

In TV, press [SETUP] button and the setup menu will show as follows:

Pressing [ ] button on the remote control,

you can select setup menu sections (setup

menu consists of

Press [ ] or [OK] button to enter this menu section.

" PICTURE " , " SOUND " ,

" TV SETUP ", " OSD SETUP", " FUNCTION ")

Press [ ] button on the remote control to select

the item, and then press [ ] button to adjust

parameters. Press [SETUP] button to return to

main menu sections.

Select " " and menu will show as follows:

Press [ ] button to select different items and

[ ] button to adjust them.

TV MENU SETUP

Description

TINT

To adjust picture tint, only valid in N 3.58/N 4.43/PAL60 .

PICTURE

Can be changed between : "USER ", "STANDARD ", " DYNAMIC "

and "SOFT ".

SHARPNESS

COLOR TEMP.

To adjust picture sharpness.

Select color temperature mode : "NORMAL ", " WARM "and "COOL ".

PICTURE

SELECT RETURN

SETUP

ENTER

PICTURE MODE USER

SATURATION

CONTRAST

BRIGHTNESS

TINT

COLOR TEMP. NORMAL

SHARPNESS

PICTURE

SELECT RETURN

SETUP

ADJUST

SATURATION

CONTRAST

BRIGHTNESS

TINT

COLOR TEMP. NORMAL

SHARPNESS

PICTURE MODE USER

TV MENU SETUP

NOTE

Select "BRIGHTNESS " to adjust it, the sub item will show as follows :

press [ ] button to adjust the value of brightness.

BRIGHTNESS

CONTRAST , TINT , SHARPNESS , SATURATION are as the same.

If you have adjusted the upper items not at USER mode, the adjusted value

will automatically overlay the USER mode parameters.

""""" "" "

Item

BALANCE

TREBLE

To adjust balance of left and right sound channels.

To adjust bass.

To adjust treble.

Select " "and menu will show as follows:

TV MENU SETUP

BASS

Description

SOUND MODE

Can be changed between USER , , FILM ." " "MUSIC" " " and "NEWS"

SOUND

Press [ ] button to select different items and press [ ] button to adjust them. The following are the descriptions of the sound item.

NICAM

Nicam/A2 function is only valid in TV while current program coming with Nicam/A2 signal.

If you can receive Nicam/A2 signal, you can operate as follows to enjoy that.

You can select Nicam stereo, mono channel or bilingual through NICAM button or in the upper menu. If Nicam/A2 signal is too weak, it will switch into mono channel automatically.

NOTES

Select NICAM mode( please refer to the notes).

SOUND

SELECT RETURN

SETUP

ENTER

BALANCE

SOUND MODE USER

BASS

TREBLE

NICAM MONO

TV MENU SETUP

Press [ ] button to select different items and press [ ] button to adjust them.

Item

CHANNEL

To change the channel number.

CHANNEL EDIT

FINE TUNING

Adjust the channel frequency accurately to make the sound and picture effect better.

MANUAL SEARCH

Only scan program of current channel .

Description

AUTO SEARCH

Scan all programs and store them automatically.

Select " " and TV setup menu will show as follows:

TV SETUP

NOTES

Enter its submenu and use the correlative functions of the channels. Please refer to the next page.

COLOR SYSTEM

SOUND SYSTEM

Can be changed between: "AUTO ", "PAL " and " SECAM ".

Can be changed between: "AUTO", "BG ", " I " , "DK " and " L ".

Which COLOR SYSTEM mode and SOUND SYSTEM mode to use is related to the

local TV broadcasting system.

""""

If the local system is SECAM L, the sound system must be selected as L , or else the search result is bad.

TV SETUP

SELECT RETURN

SETUP

ENTER

CHANNEL

COLOR SYSTEM

AUTO

SOUND SYSTEM

AUTO

FINE TUNING 40.00MHZ

MANUAL SEARCH

AUTO SEARCH

CHANNELEDIT

Item

CHANNEL

Description

SKIP

SWAP

SAVE

To select current channel here.

To select "YES " or "NO ", you can select "YES " to make current channel unaccessible while using [CH+/-] button to browse channels (but you can access it in the TV SETUP menu or this menu).

Select or directly input the channel number you want to swap with current channel.

Press the [OK] button to confirm the swap operation.

TV MENU SETUP

Select "CHANNEL EDIT " , the menu will show as follows:

AUTO SEARCH

112.25MHZ

VHF L

Select "AUTO SEARCH " , the searching menu will show as follows:

The number of programs have been found.

The current searching frequency Band, 3 Bands in total: "VHF L" ,"VHF H"," UHF".

The current searching frequency.

SELECT RETURN

SETUP

ADJUST

CHANNEL EDIT

SKIP

SWAP

SAVE

CHANNEL

PRESS SETUPTO EXIT

TV MENU SETUP

Select " " item and OSD SETUP menu will show as follows:

OSD SETUP

You can adjust the relative parameters of OSD itself here.

Description

LANGUAGE

OSD H-POSITON

TRANSPARENCY

Set OSD language.

Press [ ] button to select different items and press [ ] button to adjust them.

Item

OSD DURATION

To adjust OSD vertical position.

To adjust the main menu display duration time.

To adjust OSD horizontal position.

SELECT RETURN

SETUP

ENTER

OSD SETUP

LANGUAGE

ENGLISH

OSD H-POSITION

OSD V-POSITION

OSD DURATION

TRANSPARENCY

OSD V-POSITON

To adjust transparency of OSD.

Select " " item and FUNCTION menu will show as follows:

FUNCTION

Description

ASPECT RATIO

Press [ ] button to select different items and press [ ] button to adjust them.

Item

TV MENU SETUP

SELECT RETURN

SETUP

ENTER

FUNCTION

ASPECT RATIO

FULL

NOISE REDUCE

MID

SLEEP

OFF

FM TRANSMIT

93 MHz

RESET

NOISE REDUCE

SLEEP

To set the sleep time.

FM TRANSMIT

TRANSMIT FREQ

RESET To reset all parameters to default.

To switch the video format between "FULL" ,"ZOOM",

NORMAL" and "PANORAMA"."

To set enable or disable the FM transmit function.

To reduce the noise of the image.

TRANSMIT FREQ

To set FM transmit frequency (93MHz~100MHz).

Most TV stations provide cost-free teletext information, including the latest news, weather information, TV program list and stock information, etc. You just input the needed teletext page according to the teletext content.

TELETEXT FUNCTION

TELETEXT DISPLAY

Select the channel with teletext signal; Press [TEXT] button; Select the corresponding page according to the colorized buttons on the remote control; Press [TEXT] again and TV screen will display.

PAGE SELECTION

You can input 3 digital numbers to enter the page you want to watch through number buttons. If the inputted number is invalid, you need to input correct 3 digital numbers again after you finished inputting this 3 digital numbers.

You can select to turn pages forward or backward through [CH+/-] button.

NOTE: Press [CANCEL] button to cancel teletext.

MIX MODE

This function may let you enjoy TV and teletext information at the same time.

When a certain teletext page displays, press [MIX] button, TV and teletext information will display on screen at the same time.

Press [MIX] button again and only teletext image displays.

In mix mode, the disturbance lines on teletext characters are easy to appear, so you are not recommended to select this mode.

LOCK

You can press [HOLD] button to lock teletext page. Press this button again to cancel locking.

INDEX

Pressing [INDEX] button to display content page. Enter a certain teletext page through inputting number buttons.

Press [REVEAL] button to display the hidden teletext information. Press this button again to cancel teletext information displaying.

DISPLAY MODE

COLORIZED BUTTONS (RED, YELLOW, GREEN, CYAN)

Select the corresponding teletext page through colorized buttons.

When teletext page shows, you may double zoom in to display this teletext page;

Press [SIZE] button to zoom in the upper half part of teletext page;

Press [SIZE] button again to enter the under half part of teletext page;

Press this button for the third time to return to original display mode.

ZOOM IN TELETEXT

User could press [SUBPAGE] button to select to the subpage of teletext.

SUBPAGE

In TV, if you first use the set or havnt tuned, the hint will display as follow:'

NOTE

AV ,SCART and YPBPR SETUP

VIDEO SETTING MENU

This unit will go into standby mode automatically with no signal input after 5 minutes.

The menu setup of AV/SCART /YPBPR modes is much the same as that of TV mode, except the " " section is invalid and a bit difference in sound mode. It is not repeated here. You can find it in preceding pages.

If the input source is SCART, this unit will automatically recognise its RGB and CVBS signal. If RGB is recognised, it will auto switch into RGB mode, or else it will work at CVBS mode. The relative information will be automatically displayed on the right upper of the screen .

ANALOGUE TV

PLEASE TUNE -

4:50

PRESS AQT

If no signal input in AV, SCART, YPBPR the screen will show a similar signal to the following figure.

While, if the input has no signal, the hint will display as this:

ANALOGUE TV

4:50

OR RETUNE

NO SIGNAL

4:50

NO SIGNAL

With the VGA mode supported up to 1024*768@75Hz, and speakers built in, you can use this unit as a multimedia PC monitor. When this unit works in VGA mode, the following setup can be done.

Press [SETUP] button to enter main section. Press [ ] button to select sections and then press [ ] button or [OK] button to enter.

Press [ ] button to select " ", and press [ /OK] button to enter.

To adjust brightness of picture .

Item

Description

BRIGHTNESS

COLOR TEMPERATURE

CONTRAST

AUTO CONFIG

STATUS

Press [ ] button to adjust value of item.

To adjust contrast of picture .

Enter sub menu to adjust color temperature of picture. Press [ /OK ] button to enter.(details refer to the next page)

Auto config horizontal/vertical position, phase and frequency. Press [ /OK] button to activate.

The format of the input signal.

VGA SETUP

PICTURE

SELECT RETURN

SETUP

AUTO CONFIG

BRIGHTNESS

COLOR TEMPERATURE

CONTRAST

1024 X768@75 HZ

ENTER

VGA SETUP

Here shows the color temperature sub menu.

Item

Description

MODE

RED

GREEN

BLUE

Select color temperature mode :"USER", "NORMAL", "WARM" and "COOL".

Adjust red gain value of color temperature.

Adjust green gain value of color temperature.

Adjust blue gain value of color temperature.

SOUND

Press [ ] button to select " " and press [ /OK ] button to enter.

The operation of sound section here is the same as that in TV mode except the NICAM is invalid. Please refer to P11.

Press [ ] button to select item and press [ ] button to adjust the value of the item.

NOTE: The adjust value will be stored in USER mode.""

COLOR TEMPERATION

BLUE

GREEN

RED

NORMALMODE

SOUND

SELECT RETURN

SETUP

ENTER

SOUND MODE

BASS

BALANCE

TREBLE

USER

VGA SETUP

MONITOR SETUP

SELECT RETURN

SETUP

ENTER

MONITOR SETUP

V - POSITION

FREQUENCY

PHASE

H - POSITION

100

Press [ ] button to select " " and press [ /OK ] button to enter.

Item

Description

H - POSITION

FREQUENCY

PHASE

To adjust screen horizontal position.

To adjust screen vertical position.

To adjust frequency.

To adjust phase.

V - POSITION

VGA SETUP

OSD SETUP

Press [ ] button to select " " and press [ /OK ] button to enter.

Item

Description

LANGUAGE

OSD H-POSITION

TRANSPARENCY

Select OSD language.

To adjust OSD horizontal position.

Transparency of OSD.

Press [ ] button to select different items and press [ ] button to adjust .

NOTE

VGA

NO SIGNAL

4:50

If you use this unit as a PC-monitor: If no signal input ,after 5 minutes, this unit will go into sleep mode . In this mode, the indicator will turn red, and the screen is turned off. You can wake it up by waking up your PC . If the unit hasn

't been connected with VGA line to external

equipment, the CABLE NOT CONNECT menu will automatically display on the screen; and if the input signal is beyond the support scope, the MODE NOT SUPPORTED menu will automatically display on the screen. At these two occasion, after 5 minutes, the unit will enter real standby mode (you must use Power button or Power key to power it).

SELECT RETURN

SETUP

ENTER

OSD SETUP

LANGUAGE

ENGLISH

OSD H-POSITION

OSD V-POSITION

OSD DURATION

TRANSPARENCY

OSD V-POSITION

To adjust OSD vertical position.

OSD DURATION

To adjust the main menu display duration time.

VGA SETUP

FUNCTION

Press [ ] button to select " ", and press [ /OK ] button to enter.

Press [ ] button to select different items and press [ ] button to adjust .

Item

Description

ASPECT RATIO

NOISE REDUCE

Invalid in VGA.

SLEEP

To set the sleep time.

SELECT RETURN

SETUP

ENTER

FUNCTION

ASPECT RATIO

FULL

NOISE REDUCE

MID

SLEEP

OFF

FM TRANSMIT

TRANSMIT FREQ

93 Mhz

RESET

Reset all parameters default .

FM TRANSMIT

TRANSMIT FREQ

To set enable or disable the FM transmit function.

To set FM transmit frequency (93MHz~100MHz).

To switch the video format between "FULL" ,"CENTER".

DVD OPERATION

Sizes

Recorded Contents

Types

CD-DA Digital audio

VIDEO CD Compressed digital audio+compressed digital video (dynamic picture)

DIGITAL VIDEO

SVCD: Compressed digital audio+compressed digital video (dynamic picture)

12cm

DVD: Compressed digital audio+compressed digital video

(dynamic picture)

Compatible Disc Types

NOTES

These icons on the top banner indicate the disc types that the function described in this section applies to.

VCD

SVCD

Issues related to

CDVCDSVCDDVD

Applies to CD disc

Applies to DVD disc

Applies to SVCD disc

Applies to VCD disc

DVD

This model does not support the 8cm disc. Do not insert that type of disc into this device to prevent disc jam.

Applies to MPEG4 disc

MPEG4

DVD OPERATION

PLAY/PAUSE PLAYBACK

1. Press [ ] button in playback status.

INFORMATION

CDVCDDVD

SVCD

1. Press [INFO] button.

Disc information and operation function hint display on TV screen when in operation.

Press [INFO] button to display the following function:

DVD disc

TT XX CH XX X:XX:XX

Track XX / XX X:XX:XX

Super VCD, VCD, CD discs:

CDVCDDVD

SVCDMPEG4

Press [ ] button once to pause playback, display on TV screen:

2. To restore playback, press the [ ] button.

PLAY

When you set the screen save mode to ON(see Page 40 for details), the display on TV screen turns to screen saver status after the picture on TV screen keep still for about 2 minutes (in mode such as pause mode, stop mode, menu select, set up menu, no disc mode and so on).

NOTE

DVD MENU PLAYBACK

DVD

Some DVD discs are made with title menu or chapter menu function.

INFO

DVD OPERATION

1. Press [MENU] button to display menu on TV screen for selection, operate according to the hint of menu and press number buttons to select.

2. Press cursor button to select track you desired, then press [ ] button or [OK] button.

ROOT MENU

1. ........

2. ........

3. ........

PLAY

Number

Cursor

NOTE

Press [MENU] button to return to initial menu.

The return location varies with discs.

VCDSVCD

When playing SVCD, VCD2.0 discs with menu playback function, you may enjoy simple menu playback alternation function. You may set menu playback state in the setup menu and select menu playback or sequence playback.

For instance, VCD 2.0 disc menu playback.

VCD, SVCD MENU PLAYBACK

2. After entering main menu 1, TV screen displays submenu.

3. Press [ ], [ ] buttons to turn pages.

4. Press number buttons to select submenu content. For instance, press number button 5 and the unit begins to play the fifth track.

5. When playing, pressing [MENU] button to return to the root menu.

1. TV screen displays main menu.

Press number buttons to select. For instance, press number button 1 to select main menu 1.

Number

Cursor

DVD OPERATION

Direct play is a creative function that very helpful for users to enjoy DVDs. With direct play function, you can play DVD directly, skipping the legal warning, advertisements, chapter selection and other thing that come before the movies start. You can enjoy pure movies without bothering. When the disc is loaded and the legal warning, advertisements, chapter selection message shows, just press [ ] button to activate direct play function and start a pure movies playback.

DIRECT PLAY

When you are enjoying VCD with PBC function, direct play can disable the PBC and VCD will be played in sequence.

NOTE

PBC PLAYBACK

VCD

SVCD

Enjoy PBC alternate function when playing Super VCD, VCD2.0 disc with PBC function, For example:playVCD2.0 disc.

1. Main menu displays on TV screen A:

Press number button to select. For example: select main menu 1. The TV screen as show in B:

1. ........

2. ........

1. ........

2. ........

2. Submenu displays on TV screen after enter into main menu 1.

1. ........

2. ........

3. ........

4. ........

5. ........

3. Press[ ] or [ ] button adjacent page.to turn to

4. Press number buttons to select submenu. For instance, press number5,the player begin playback with track 5.

5. Press [MENU] button to submenu. Press again to return to main menu.

6. Press [MENU] button to shut off the PBC and start the sequence playback function.

Number

Cursor

SCAN

DVD OPERATION

SELECT TRACK TO PLAY DIRECTLY BY NUMBER BUTTONS

CDVCDSVCDDVD

1. Insert disc, after disc reading and normal playback, press number buttons to select track to play directly.

1 + 6

-/--

If track number is less than 10, press number buttons 1 to 9 to directly select. For instance,

select the seventh track:

For instance, select the 16th track

If track number is more than or equal to 10, press [-/- -] button and then number buttons 0 to 9.

If track number is more than or equal to 20, press [-/- -] button twice and then number buttons

0 to 9. The rest can be performed by analog.

Number button

DVD

NOTE

1. This player can save the currently played time point automatically when you leave the current DVD disc playback (switch from DVD signal source to other signal source, enter standby state in DVD mode).

2. When switching to DVD playback state again, this player can automatically search the time point saved last time to continue playing. If you want to play from the beginning, please press [ ] button twice and then press [ ] button.

This player may save one DVD disc for one time.

The DVD disc played the last time will be saved, and the former saved contents will be cleared by new saved contents.

lf power is cut off unexpectedly, the DVD disc played currently will not be saved.

MEMORY

PLAY

STOP

1. Press [LANG] button.

CDVCDSVCDDVD

SELECT LANGUAGE/AUDIO

As for DVD discs with multiple languages, you may select the desired language when playing.

As for VCD, SVCD or CD disc with multiple channels, you may select audio output from left or

right channel or select stereo audio output. For VCD disc, left channel records dubbing and

right channel records singing, and you may select left channel for dubbing.

VCD, SVCD, CD disc:

Mono Right

Mono Left

Stereo

Language type varies with disc recording.

When playing some DVD discs, pressing [LANG] button to switch language may result in playing the track from its beginning.

For VCD story disc with double languages, you may press [LANG] button to select the desired language.

NOTE

DVD disc:

Audio 1/2

French

Audio 2/2

Chinese

LANGUAGE

DVD OPERATION

To SVCD, VCD2.0 discs, the repeat function cannot be operated in menu playback mode.

1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions.

The repeat playback function enables a certain title/chapter/track/disc repeated.

DVD DISC:

SVCD, VCD, CD discs:

To SVCD, VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1, CD discs, the repeat function may be directly operated.

Track Repeat Off

ALL

Repeat Off

TitleChapter

ALL

CDVCDSVCDDVD

MPEG4

REPEAT PLAYBACK

REPEAT

Mix-Mono

DVD OPERATION

The A-B repeat function may be invalid to some discs. In menu playback mode, the segment can only be selected in the track.

3. Press [A-B] button for the third time.

The unit restores to normal playback.

NOTE

When playing disc, you may press [A-B] button to play your desired segment content repeatedly.

1. In normal playback, press [A-B] button at the beginning point (point A) of the segment that you desire to play repeatedly.

TV screen displays:

2. In normal playback, press [A-B] button at the ending point (point B) of the segment that you desire to play repeatedly.

TV screen displays:

The unit automatically returns to point A and begins to play the selected segment (A-B).

CDVCDSVCDDVD

MPEG4

REPEAT PLAYBACK OF SELECTED SEGMENT

A-B

1. Press [ ] button and the unit begins fast forward playback.

Press [ ] button each time and the disc playback speed switches in the following sequence circularly:

2. Press [ ] button and the unit begins fast backward playback.

Press [ ] button each time and the disc playback speed switches in the following sequence circularly:

When playing discs, you may select fast forward or fast backward playback to search a certain point.

CDVCDSVCDDVD

MPEG4

16X32X

FAST PLAYBACK

DVD OPERATION

1. Search title and chapter. For instance, search the 2nd chapter in title 6.

Inputting a certain time, title number or chapter number directly may search in the disc fast and

then play forward from this position.

Play DVD disc

DVD SVCD VCD CD

MPEG4

PLAY FROM THE DESIRED POSITION

Then press number button 6 to select Title 6, shown in the figure:

Title 06 /30 Chapter /02

2. Search title time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second.

Title 06/30 Time : :

Finally press number button 2 to select Chapter 2, shown in the figure:

Title 06 /30 Chapter 02/02

Press [GOTO] button and TV screen displays:

Press [ ] button to move cursor and lighten the title number, shown in the figure:

Title 03/30 Chapter /02

Title /30 Chapter 01/02

3. Search chapter time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second.

Chapter 01/04 Time : :

1. Search disc time

Play SVCD, VCD and CD discs

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input minute and second.

Disc Go To --:--

1. Select track

2. Search track time

Play MPEG4 disc

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input the track.

Select

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second.

2. Search track time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input minute and second.

Track Go To --:--

-:--:--

Go To

DVD OPERATION

3. Select the track

Select Track --/15

Press [GOTO] button until TV screen displays the following figure. Press number buttons to input

track.

GOTO

ZOOMING THE DISPLAYED FRAME

VCDSVCDDVD

MPEG4

1. When playing a disc, press the [ZOOM] button can open the zoom in/out function, and the TV screen displays( take X2 mode as an example):

Zoom in/out the player frame.

The frame is magnified to 2 times of the normal size.

4. When the fame is magnified, press the [ ] buttons to move the frame.

2. Press the [ZOOM] button continually, all the magnified/ minified modes display on the screen in turn. The magnified/ minified modes includes:2X,3X,4X,1/2,1/3,1/4.

3. When the mode is on , press [ZOOM] button to close the zoom in/ out function, and the frame restores normal size.

1/4

ZOOM

MPEG4 is the video/audio standard published by MPEG(Moving Pictures Experts Group) in November,1998.As the discrepant parts between frames of the picture only are processed and the same parts are deleted, the data quantity is greatly decreased. The most distinct feature of MPEG4 is the high compression and clear imaging. Furthermore, MPEG4 provides elastic specifications to adjust the stream according to the user requirements. The larger stream can be used when collecting private films; and the small stream can be used in network transferring, which make MPEG4 widely used.

JPEG(Joint Photographic Experts Group) is the most widely used picture compression and storage format today. Utilizing high efficiency compression algorithm, JPEG compresses the original picture 15 to 20 times with excellent picture quality. JPEG features small size data, convenient application and is supported by most picture processing software, so it is very suitable to store photos.

MPEG4 AND JPEG FILE PLAYING

The strong decoding capability of this unit can decode and play the files with the above formats. In the course of playing, an operation menu will appear and its construction is shown as follows.

DVD OPERATION

DIR window

Display the current path.

Display the current state information.

State window

Scroll bar window

Indicate the current file's position.

Display the current path's file.

File window

Preview window

JPEG image preview.

Information window

Display the current operation prompts.

The state information in state window is as follows:

00:57

002/073

03:31 128

1 3

Elapsed playback time

Total playback time

The audio bit rate (generally the bit rate is 128kbps, sometimes it is VBR).

Current playback mode indicator

Track indicator

Dynamic frequency spectrum indicator

00:00 00:00 004/369

\PIC\

Du000

Du001

Du002

After you put a MPEG4 format file into the unit, it will search disc information and display the operation menu as figure A (The displayed content varies with disc.).

1. Play MPEG4 file

In Figure B, press [ ] button to select the MPEG4 format file you desired and press [OK] button to confirm. The unit begins to play MPEG4 format movie.

00:00 00:00

Du000

Du002

Du001

Du003

001/004

Press [ ] button to select the directory you desired and press [OK] button to confirm. For instance, you select the directory Du000 in Figure A, press [OK] button and TV screen displays as in Figure B. The window returns to the previous directory when you select [ ...] or press [ ] button.

00:00 00:00 001/369

\Du000\

MP000

MP001

MP002

A/V

2. Play JPEG file

After you put an JPEG format file into the unit, it will search disc information and display the operation menu as in the following figure. After selecting J PEG file, the preview window will appear this file's preview image to facilitate you to select. After you select the JPEG file you desired and press [OK] button to confirm, the picture will display in full screen.

00:00 00:00 004/369

\PIC\

Du000

Du001

Du002

RESOLUTION 640 480

DVD OPERATION

1. Press [ ],[ ] button may turn to the next or last page.

Other basic operation methods

Other functions of JPEG file

NOTE

When buttons are invalid, TV screen displays:

Please press effective button again.

2. When in preview playback, pressing [MENU] button will exit preview playback function.

1. When playing JPEG file, pressing [ ] button will achieve preview playback function. At the same time, all J PEG files are displayed on TV screen. One page can display up to 12 pictures at most. The remaining ones are shown on the next page. Pressing [ ] button will enter the next page and [ ] button will enter the previous page. You may press number buttons or [ ] button to select the picture you desired and press [OK ] button to confirm.

Cursor buttons

MPEG4

USAGE OF USB DEVICE AND 3 -IN-1 CARD READER

2. Play 3-in-1 CARD READER

USB jack

MEDIA CARD socket

CARD READER AND USB OPERATION

USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0. Here are some common types of USB 1.1 devices: Monitors, Communication devices, Audio Human Input Device(HID), Mass storage drives etc. Most flash memory, USB HDD etc. belongs to Mass Storage Class. Mass Storage Class includes 2 transport manners:

1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport

2. USB 1.1 Mass Storage Class Bulk-Only Transport

This unit supports USB 1.1 Mass Storage Class Bulk-Only Transport. When using USB 1.1 Mass Storage Class Bulk-Only Transport devices, please note that the file operation system only supports Windows FAT, it does not support FAT32 and NTFS file system. The 3-in-1 card reader of this player can read SD Card (Secure Digital Card), MMC Card (Multi Media Card) MS Card (Memory Stick Card).

Important: Before you use the USB or card reader function, you should change the input source of the TV to DVD and press [DVD] button.

This unit can only support the USB HDD which has one partition, if

you USB HDD has several partitions, error maybe occur.

1. Using USB devices:

Please insert USB devices into the USB jack of this unit then press [DVD] button . After correctly reading USB devices data, the screen will display an operation menu. Please refer to the part of "MPEG4 and J PEG FILE PLAYBACK" on page 34 for details.

In DVD mode, press [DVD] button thrice, the TV set will detect and read card. If there is a supported card in the card port, after reading card data correctly, an operation menu will be displayed on the screen.

If you want to switch to DVD state, please press [DVD] button to exit USB and card reader state.

DOWN

PLAY

DVD

DVD USB

CARD

NOTES

Press the effective button again.

CARD READER AND USB OPERATION

This player can play USB devices and MPEG4 and JPEG files in SD, MMC and MS cards.

When reading MPEG files with large size in USB device or media card, pause may appear.

If there is no files in USB devices or media card , on-screen appears "Empty Device". If USB devices or media card have a problem, or the operation is incorrect, the screen displays "Device Error". Please check USB device or media card, or else unplug them then insert them again.

If a USB device or media card which are unsupported by the machine have been connected, the unit may 'lock-up' and won't respond to commands. In this event please switch off the power, take out USB equipment or media card, and then switch the power back on to reset the machine.

This unit does not support USB On The Go (OTG) technology, so any deviceswith OTG data exchange mode may not work correctly. Check this out before operation.

When inserting a media card, you should insert it in the right direction: If you are facing the TV screen, make sure you plug-in the card with its connector facing away fromyou.

When the button is invalid, the TV screen displays:

Please take off the USB while it stops playing. Never take off it while it's playing.

1. Down mix mode: this item is used to set this unit's DOWN MIX mode to change multi channel audio into 2-channel audio output.

Optional settings: LT/RT, Stereo; Default: Stereo

1. TV Display: This item is used to set the output picture ratio of this unit.

Optional settings: Normal/PS, Normal/LB, Wide, Wide Squeeze; Default: Wide.

2. OSD language: This item is used to set the OSD language .

Optional settings: English; Default: English

3. Screen Saver: Open or close the screen saver.

Optional settings: On, Off; Default: On

DVD FUNCTION SETUP

GENERAL SETUP

AUDIO SETUP

General Setup Page

Last Memory

Screen Saver

TV Display

Wide

OSD Lang

ENG

Go To GeneralSetup Page

Audio Setup Page

3D Processing HDCD

Down mix

STR

Equalizer

Dolby Digital Setup

Go To Audio Setup Page

SPDIF Setup

Turn on this TV, press [SOURCE] button to change source to DVD,press [SETUP] button, then press [ ] button to choose DVD item, the DVD setup menu will be displayed as follow:

4. Last Memory: This player can save the currently played time point automatically when you leave the current DVD disc playback (switch from DVD signal source to other signal source, enter standby state in DVD mode).

NOTE: When switching to DVD playback state again, this player can automatically search the time

point saved last time to continue playing. If you want to play from the beginning, please press [ ] button twice and then press [ ] button.

Optional settings: On, Off; Default: On

2. SPDIF Setup: Press [OK] or [ ] button to enter the submenu of SPDIF setup.

DVD FUNCTION SETUP

5. 3D Processing: Set reverberation mode .

6. HDCD: Set filter mode.

Optional settings: Off, Concert, Living Room, Hall, Bathroom, Cave, Arena, Church; Default: Off.

Optional settings: Off,1X, 2X; Default: 1X.

Treble Boost: Enhance high frequency sound level, optional settings: On, Off; default: Off.

Super Bass: Enhance very low frequency sound level, optional settings: On, Off; default: Off.

Optional settings: SPDIF/RAW, PCM; Default:SPDIF/ SPDIF/RAW

LPCM output: This item is used to set the output frequency of LPCM audio data to fit for different power amplifiers.

Optional settings: 48K,96K; Default: 48K.

3. Dolby Digital Setup: Press [OK] or [ ] button to enter the submenu.

Dual Mono:

Dynamic:

Optional settings: Stereo, L-Mono, R-Mono, Mix-Mono ;Default: .Stereo

Optional settings: Off,1/4,1/2, 3/4, Full; Default: Off.

4. Equalizer : Press [OK] or [ ] button to enter the submenu to adjust the items.

EQ Type: Set equalizer type, optional settings: None, Rock, Pop, Live, Dance, Techno, Classic,

Soft; Default: None.

Bass Boost: Enhance low frequency sound level, optional settings: On, Off; default: Off.

SPDIF output: This item is used to set the bit stream type of the digital output.

SPDIF Setup Page

Setup SPDIF

LPCM Out

48K

SPDIF/PCM

SPDIF Output RAW

SPDIF/RAW

Dolby Digital Setup

Dual Mono (1+1) Setup

Dynamic

L-Mono

Dual Mono STR

Stereo

R-Mono Mix-Mono

Equalizer Page

Select Equalizer Type

Bass Boost

EQ Type None

None

Pop Live Dance Techno Classic Soft

Off Super Bass Treble Boost

Off

Rock

NOTE: Only when the SPDIF output is set the SPDIF/PCM, the frequency of LPCM audio data

is optional.

DVD FUNCTION SETUP

1. TV Type: To set the output video system of this player.

Optional settings: PAL, Auto, NTSC; Default: PAL.

2. PBC: To set the PBC status.

Optional settings: On, Off; Default: On

When playing SVCD, VCD2.0 discs, if PBC is set On, this unit enters PBC playback mode; if PBC is set Off, the unit plays the disc according to track sequence.

PREFERENCE SETUP

Preference Page

Disc Menu ENG Parental

Audio

ENG

PBC

TV Type

PAL

Go To Preference Page

Subtitle

ENG

Country Region ENG Default

Off

5. Disc menu language: This item is used to set the preference disc menu language when playing.

Default of disc menu language: English

3. Audio: This item is used to set the preference audio language when playing.

4. Subtitle: This item is used to set the preference subtitle language when playing.

2. Brightness: This item is used to set the brightness of video outputs.

1. Sharpness: This item is used to set the sharpness of video outputs.

Optional settings: High, Medium, Low; Default: Med.

4. Gamma: This item is used to set the color temperature of video output.

Optional settings: High, Medium, Low, None ; Default: None

5. Hue: This item is used to set the hue of video outputs.

3. Contrast: This item is used to set the contrast of video outputs.

6. Saturation: This item is used to set the saturation of video outputs.

VIDEO SETUP

Video Quality Setup

Hue 00 Saturation 00

Sharpness

Med

Contrast

Brightness

Go To Video Setup Page

Gamma

None

DVD FUNCTION SETUP

Password : This item is used to set a six digit password to enable you to change the parental control ratings.

Password Mode: To set whether parental control function needs a password, optional setting:

On, Off; Default: On.

PASSWORD SETUP

Password : To change the password of the parental control function, default :000000.

Password Setup Page

Password Mode

Password

Go To Password Setup Page

When changing the parental control ratings, a password is needed. Please refer to the following password item for details.

8. Default: This item is used to restore all settings to the default value except "Parental control and Password" in the setup menu.""

6. Parental: this item is used to set the parental control ratings to prevent children from watching restricted contents. (In the event the disc supports this function)

Optional settings: KID SAFE, G, PG, PG 13, PGR, R, NC17, ADULT, Off; Default: Off

NOTE

Audio, subtitle and disc menu language are only effective in DVD mode.

If the disc is not recorded with the language you appointed, the unit will apply the language that the disc appointed to play.

Select other languages: press [ ] button to move cursor to "OTHER" item, press [OK] button and then number buttons to input the language code you desired. After input finishes, press [OK] button again.

NOTE

7. Country Region: Set the country region according to your country.

DTV MENU OPERATION

Press the [DTV SETUP] button, then the Main Menu will be di splayed, you can set your preferences in that, such as search channels, edit the channel list or your favorite list , view Programme Guide Informati on.

It is easy to see that the Main Menu is composed of six parts: General Setting, Channel I nstall, Channel Manage, Advanced Channel , EPG, System Info.

GENERAL SETTING

You can set the base environment of the DTV.

Note: When you connect an active antenna to the R input connector, pl ease turn on the antenna power so that the signal quality coul d be improved.

Note: Select different i tem using the[ ]button ,and press [ OK] or [

] to enter it.

You can select the auto search or manual search.

Mai n Menu

General Setting

Channel Install

Channel Manage

Advanced Setting

EPG

System Info

EXIT

General Setting

Menu language

Audio language

Subtitle l anguage

Subtitle d isplay

Opacity Level

Antenna Power

EXIT

English

Off

100%

Off

Channel Search

Auto Search

Manual Search

EXIT

CHANNEL SEARCH

Menu Language: Set the default menu language.

Audio Language: Set the default audio language.

Subtitle Language: Set the defaul t subtitle language.

Subtitle Displ ay: Set the default subtitle as show

or not.

Opacity Level: Set the default menu opacity level.

Antenna power: Set the default antenna power turn on or off.

SETUP

DTV MENU OPERATION

Channel Search

EXIT

Channell Search

Installation type

New

You can set the search mode as new or add .

Note: If the mode i s new, will delete the o ld channel the current frequency. If the mode i s add, do not delete the old channel the current frequency.

Manual Search

Select the Chanel i tem you can select the frequency by the [ ] or [ ] button.

Search Result

You can see all TV and Radio channels found while the channel search is i n progress. A pop-up w ill indicate you that the automatic installati on is finished. Thi s pop-up will disappear automatically after a few seconds.

Channel

Frequency

OK EXIT

Manual Search

Quality

474.000

SETUP

Then press [ OK ] button to confirm it.

Then press [ OK ] button to search the channel.

SETUP

Search Result

TV channels: 6 Radi os:2

Progress:

Installti on completed

Please wait ...

BBC THREE BBC Radio Wales BBC 2W BBC Radio Cymru BBC ONE Wales CBC channel BBC NEWS 24 BBCi

Cerate a favourite list

Name

Channels

EXIT

RFAV1

Radios

SETUP

DTV MENU OPERATION

The Favorite lists menu a llows you to create, modify and delete your own favori te lists but not the two default service lists (TV, Radio).

Four TV favorite lists and four radi o favorite lists can be created.

FAV 1

EXITSETUP

1 BBC Radio Wales

2 BBC Radio Cymru

PAG

Lock Skip Sort/move Skip/Add All

This screen allows you to modify a favourite list. The current favourite list name is displayed on the top of the screen. All the channels matching the criteria selected at the creation of the favourite list are

listed. Each favourite list has its own channel numbering. In case of a favourite list, you can lock or unlock a channel , skip or add some channels

or all channels. You can al so sort the channels by a lphabetical order, by providers or manually. All these action are performed usi ng screen color buttons (RED, GREEN, YELLOW, CY

AN). If the list i s the defaul t TV and Radio lists, only the Lock/Unlock option is available. At the top of the list, the favouri te list name and type, the provi der name are displayed. The last viewed service i s d isplayed i n the v ideo window. Warning : The only modi fication you can make in the two default TV and Radio lists is

to lock or unlock a channel.

ChannelManage

Create a favourite list

Modeify a favourite list

EXIT

Delete a favourite list

SETUP

This screen allows you to create a new favori te channels list with sel ection criteria. The name of the list is set to F AV x for TV services and

RFAV x for Radio.

Modify a favourite list

RADIO

EXIT

SETUP

Cerate a favourite list

CHANNEL MANAGE

Modifying a Favourite Li st

FAV1

DTV MENU OPERATION

Default TV/Radio lists

On these lists, only the Lock/unlock option is available: a press on the [RED] button w ill lock the highlighted channel if unlock and vi ce-versa (toggle behavior).

Delete a favorite list

This screen allows you to delete a favorite list.

This pop-up allows you to confi rm or not the deletion of a favorite list:

You can going to remove the

favorite list, press OK to confirm.

EXIT

Delete a favourite list

EXIT

FAV2

FAV1

SETUP

Add All/Skip All: accessed by a press on the [CYAN] button . Allows you to generalize the Add or Skip operations to all channels.

Sort/Move: Accessed by a press on the [ YELLOW] button. Sort can be made in a few different ways, by al phabetical or by provider. I n this screen, the sel ected services will be sorted and placed at the begi nning of the list, and the other (not selected) will

be sorted and placed at the end of the list. Move actions consist i n h ighlighting the channel to move, pressing the [ OK]

button to select it, moving the cursor to the destinati on item and pressing the [ OK] button to finalize the move operation.

Lock/Unlock: Toggle behavior on the [ RED] button, i n front of the channel list a color icon indicate the status (red for l ocked, blue for unlock), this option is only available if channel is added.

Add/Skip: T

oggle behavior on the [GREEN] button, in front of the channel list a col or icon

indicates the status (whi te for skipped, blue for added).

TV/Radio favourite lists

For all these lists, a few actions are available:

DTV MENU OPERATION

Advanced Setting

PIN change

Parental contro l

EXIT

Disabled

Channel lock

Maturity level

SETUP

The parental control item allows you to enable or disable the locking management.

A parental rating (between 1 and 18 years) is available . In this case, all services whi ch are not in the age limits become inaccessibl e unl ess enter the PIN

code. This parental

rating depends of the information forwarded or not by the broadcaster.

Enter PIN code

This menu is locked

A press on red button allows you to modify the PIN code which will be asked when try to access to a protected part defined just above.

The menu to modify PIN code is protected by requesting PIN code access. The default DTV P IN code (after the

First Time I nstallation or Factory System Reinstallation ) i s 0000 . Then enter the new wanted PIN code, enter it a second time i n Confirm item, just to be sure that there is no typing fault .

"""

"" "

PIN Change

PIN code

New PIN code

Confirm

If the parental control item is di sabled then a ll the locking are deacti vated, If it is enabled then all the locking are applied according to your choice.

Parental Control

ADVANCED SETTING

Channel Lock

Allows you to lock a specifi c service (the PIN code is requested when you zap to the locked services). To lock / unlock a service, see modify a favorite list ) .""

Maturity Level

WARNING: If maturity level access control is activated, all access to ti mer feature

request the PIN code.

EXIT

SETUP

EXIT

SETUP

DTV MENU OPERATION

40 BBC Radio Wales

EXITS ETUP

Tuesdays 30/01

PAG

15:50 The Likeaballs

15:25 Lazytown

16:20 Raven:The ls land

15:51 30/01/2007

INFO

ELECTRONIC PROGRAM GUIDE (EPG)

By pressing the Guide button, an Electroni c Program Guide i s displayed. The EPG supplies information, such as program lists, start and end t imes of all available channels . In addi tion, In addition, the detailed informati on about the program is often available in he EPG. (The

availability and the amount of program details will vary depending on the broadcaster.) A press on the [

] buttons allows you to consul t all event pages for the days, a press on the [ ] button when last event of the list i s h ighlighted displays the next event page. A press on the [

] buttons allows you to change to previ ous/next day of event presentati on. The [CH+/-] or [ ] buttons allows you to change to another channel in the current channel list.

SYSTEM INFO

You can select the system information or factory settings.

System Information

Factory Settings

System info

EXIT

SETUP

This screen gives you some i nformation about the DTV (Device Version and Software Versi on).

System Information

W153D_ICE_ 2008_01_06_V1.0

EXIT

SETUP

DTV MENU OPERATION

This acknowledge pop-up allows you to erase all the custom parameters. If it is confirmed, all services lists and user preferences are deleted and the DTV restarts as for a First T ime

installation .

Factory Settings

Yes

All private settings and otheruser data

will bu erased.

Do you wantto proceed?

1BBCONEWales 16:00

Lazytown

TV TV 15:40

At the end of the first i nstallation or after the validation of a service in the service sel ector, the DTV turns into viewing mode. This mode is al so called TV/radio mode accordi ng to the selected channel (TV or Radio).

PROGRAM INFORMAT ION

After each channel change or after a press on the [INFO ] button, a banner i s displayed at the bottom of the screen for a few seconds, including service type (1), current list (2), channel number in the list (3), channel name (4), event name (5), current ti me (6), event duration bargraph with start and stop ti mes (7) as well as specific icons rel ative to the service properties (8) (from left to right : maturity level, extended event i nformation / teletext presence / service l ocked /mul titrack audio / scrambled program / Subtitle presence).

1 2

Information about present and followi ng events of the current servi ce are available . By default, the present event is di splayed. The following event i s displayed by pressi ng the

[ ] buttons (toggl e between present and following events).

EXITOK SE TUP

The Channel selector is activated by a press on the OK button while i n v iewing mode. This screen presents the channel s of the current default/favourite lists. When selecting a channel of this list with the OK button, the DTV changes the video background accordingl y. When you press the OK button on the sel ected service, the DTV switches to viewi ng mode

DTV MENU OPERATION

MHEG5

Newsround

15:50 30 Jan

B B C NEWS

CBBC

Press TEXT to exit press 0 forfull screen TV

HOME

SHORTCUTS

B B C

BACK INDEX

571

'Super-lice' fighti ng nit shampoo

Jonny wilkinson back for England

Grey wolf makes amazing comeback

Elephants stage highway robberies

McLeish named new Sottland coach

More...

If your chosen channel has MHEG5 features, you can access them. Tel etext services often load automatically shortly after the Digital Teletext wi ndow is displ ayed. In which case, si mply follow the given instructions ( press color buttons).

1. Press [TEXT] or [RED] button to access MHEG5 features.

2. Press [TEXT] or [RED] button again to return to normal viewing.

3. Press the [CH+/-] button to exi t this service.

1 BBC ONE Wales

2 BBC 2W

79 CBBC Channel

80 BBC NEWS 24

105 BBCI

800 Te letx.german

7 BBC THREE

EXITOK

PAG

FAV

and changes the selected channel accordingly. Zapping can also be done by entering channel number using digit keys. The channel list is displ ayed and is automatically removed from the screen after few seconds. The screen bellow corresponds to the TV list. You can toggle from TV lists to Radio lists using the

[

] button and between different TV lists using

[FAVORIT E] button.

Please check for causes of problems in accordance with the following chart before contacting maintenance personnel.

Cannot power on

Please make sure the power cordis correctly connected

No sound

Please make sure the audio cord is correctly connected

Check volume

Volume too low

Check volume

If volume is still too low when adjusting volume to maximum, please check whether the input device is correctly

Please make sure the antenna is well connected

Remote control failure

Check whether remote control battery is full charged Whether battery installation is correct Whether obstacles exists between remote control and the unit's receiving window Check whether receiving window has strong light

Symptom

Causes and Correction

Symptom

Causes and Correction

Black screen, power indicator light off

Check whether the power cord is well connected, and whether this unit is powered on

Check whether the signal cord of input device is well connected Check whether input device is powered on

Check whether the input device signal is in this unit's specification

Check computer output mode: control panel-display-setup If the setup does not accord with this unit's specification,

please change the display setup

Horizontal scanning frequency: 30kHz 75kHz

Max display mode:

1024X768 75 Hz@

Image display flicker, unstable

Vertical scanning frequency: 50 Hz 75Hz

TROUBLESHOOTING

DISPLAY TROUBLESHOOTING

SOUND AND TV TROUBLESHOOTING

Snowy picture

Make sure there is nothing plugged into the headphone jack

Unstable image or abnormal picture color

Correct the TV set settings

Reset the TV set to default setting

If the above methods still cannot solve the problem or the troubles are not listed, please contact local maintenance personnel.

Symptom

Causes

Correction

No sound

1. Disc warped or dirty

2. The unit in mute state

1. Clean the disc

2. Press MUTE button to cancel it.

No image

1. TV not set for proper system

1. Reset AV/TV state of TV

No color

1.2.TV system not right

TV color not well adjusted

1. Reset the TV color

No disc reading

1. Disc warped or dirty

2. Disc not correctly placed

3. Condensation on laser head

1. Clean the disc

2. Reload a disc with label side facing up

3. Switch on power, unload disc and leave

it for about 1 hour

Temporary

function failure

1. Mal-fabricated disc used

2. Wrong buttons pressed

3. Static leakage into the unit from outside

1. Wait for 5 to 10 seconds to restore to

normality automatically

2. Operate again

3. Power off for 1 to 2 minutes to power

on again

Image rolling

1. System setup not suitable

for disc

1. Adjust system mode

Not play

1. Condensation on laser head

2. Disc not properly loaded

3. Disc not compatible with the unit

1. Switch on power and wait for 1 to 2 hours

2. Make sure label side of the disc facing up

3. Confirm whether this unit is compatible the placed discwith

Sound distortion

1. To o large volume of connected device

2. Sound field mode not suitable for

disc

1. Adjust the device volume

2. Adjust appropriate sound field

No subtitle

1. No subtitle recorded on disc

2. The unit subtitle is turned off

1. Disc problem

2. Press SUBT button to select it

TROUBLESHOOTING

DVD TROUBLESHOOTING

VGA

SCART

YPBPR

W H D

DVB

Input connector Frequency range (VHF/UHF) Channel range(VHF/UHF)

IEC-Type, IEC 169-2, Female

174MHz

~858MHz

7 & 8 Mhz

Because of disc quality and format differences we cannot assure the unit will read all. Some functions cannot utilized on some discs, but this is not a fault with the machine.

Normal Standby mode

Less than

Power

Format

(Hz )

Ver scanning frequency

SUPPORTED PC INPUT MODE

31.5 70.0

DOS

640 350 25.17

720 400

31.5 70.0

28.32

DOS

640 480

31.5 60.0

25.18

DOS

640 480

37.9 72.0

31.50

VESA

640 480

37.5 75.0

31.50

VESA

800 600

35.1 56.2

36.00

VESA

800 600

37.9 60.0

40.00

VESA

800 600

48.1 72.0

50.00

VESA

800 600

46.9 75.0

49.50

VESA

Hor scanning frequency

(KHz)

Pixel frequency

To prolong this unit's service life, you are suggested to use power management function of computer.

Because of the difference of display card output signal (especially non-standard signal output), the display image may appear little disturbance which can be adjusted through " AUTO CONFIG " in the "PICTURE" menu by users.

This product does not support the display mode not listed above. In order to achieve the best display effect, please select the above-listed 12 display modes input signal.

DISPLAY MODE

Resolution

(MHz)

1024 768

48.4 60.0

65.00

VESA

1024 768

VESA

56.5

70.11

75.00

1024 768 60.0 75.0 78.75

NOTES

DISPLAY MODE

Ver scanning frequency (HZ)

Hor scanning frequency ( KHZ)

SUPPORTED VIDEO INPUT MODE

Format

Vert scan type

720X480 31.5 60 480P

720X480 15.6 60 480i

720X576 31.2 50 576P

720X576 15.6 50 576i

Specifications and designs are subject to change without notice.

NOTE

Please check the following accessories.

User manual

AV cord

Remote control and battery

Power adapter

Operational Manual

ACCESSORIES

Kickstand Kit

V0.0

5196136

Wall Mount Holder Kit (optional)

Automotive Power socket adapter

Avtex W153D, W193D User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual