AVTEQ TT-1, TT-2 User Manual

TT-1 / TT-2 Hardware List

BAG A

Qty Description
2 Hex Cap Bolt 5/16 -18 x 1¼

4 Hex Cap Bolt, 5/16 – 18 x 1
12 SAE Washer, 5/16”
6 Hex Nut, 5/16 – 18

BAG B (metal tops)

Qty Description
4 Socket Head, M6 x 25

4 Black SAE Washer ¼”
4 Hex Nut, M6 nut

BAG W (wood tops)

Qty Description
4 Socket Head Cap Screw, M6 x 50

4 Black SAE Washer, ¼”
4 Hex Nut, M6

TT-1 and TT-2 Installation

1. Remove rear cover
from Table Top Mount

2. Using Bag B (metal top) or Bag W
(wood top), secure table top mount to top

3. Using nuts provided, secure top
to base of cart

4. Using hardware provided, Bolt rear
brackets to back of Plasma(s) or LCD(s)
screen as vertically close to center of
television as possible. Use nylon spacers
provided to increase cable management
space for routing cable into the table top
mount.

For Assistance Call - 1.800.285.8315

TT-1 and TT-2 Installation



5. Using Bag A, Bolt the Flat Screen Mount
to the Table Top Mount. For larger screens or
screens with bottom mounted speakers you
may need to raise the height.

6. Using brackets, hang Plasma(s) or LCD(s)
on Flat Screen Mount.

7. Attach acrylic platform to camera platform.
Slide Camera Platform down through top
slot to desired height. Using bolts provided,
secure platform at desired height.

8. After routing all cables, replace back panel
and secure with bolts provided.

For Assistance Call - 1.800.285.8315



TT-1 and TT-2 Installation



9. Place Slide Locks on each end of Flat Screen
Mount next to the rear brackets. These keep the
screen(s) centered on the Flat Screen Mount.

For Assistance Call - 1.800.285.8315