Avtech AVI201, AVI202, AVI203, AVI212 User Manual

Download

Page 1

197Z

AVI201, 202, 203, 212 manual_V0.84

AVI201 / 202 / 203 / 212

Network Cameras

User’s Manual

Please read instructions thoroughly before operation and retain it for future reference.

The image shown above may differ from the actual product appearance.

Page 2

IMPORTANT SAFEGUARD

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION:

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this apparatus from

the type of power source indicated on the label. The company shall not be liable for any damages arising out of any

improper use, even if we have been advised of the possibility of such damages.

Graphic Symbol Explanation

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

appliance.

All lead-free products offered by the company comply with the requirements of the European law on

the Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes

and products are strictly “lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be

collected separately at the product end-of-life. This applies to your product and any peripherals

marked with this symbol. Do not dispose of these products as unsorted municipal waste. Contact

your local dealer for procedures for recycling this equipment.

This apparatus is manufactured to comply with the radio interference requirements.

Disclaimer

We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume any

legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of this manual is

subject to change without notice.

MPEG4 Licensing

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE

PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE

MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A

CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A

VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE

IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL

INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE

HTTP://WWW.MPEGLA.COM.

Version

Firmware: 1012-1005-1005-1000 Video Viewer AP Software: 0078

Page 3

TABLE OF CONTENTS

1. PRODUCT OVERVIEW............................................................................................................ 1

1.1 Description ...................................................................................................................................................... 1

1.2 Features.......................................................................................................................................................... 1

1.3 Package Contents........................................................................................................................................... 1

1.4 Specifications*................................................................................................................................................. 2

2. HARDWARE OVERVIEW ........................................................................................................ 3

2.1 Rear Panel ...................................................................................................................................................... 3

2.2 Upper Side & Underside ................................................................................................................................. 3

3. INSTALLATION........................................................................................................................ 4

3.1 Install the Hardware ........................................................................................................................................ 4

3.2 Assign an IP address and Access the Camera................................................................................................ 6

4. VIDEO VIEWER BASIC OPERATION ..................................................................................... 7

4.1 The Live View Page ........................................................................................................................................ 7

4.2 Address Book .................................................................................................................................................. 8

4.3 Emap............................................................................................................................................................... 9

4.4 Manual Record.............................................................................................................................................. 11

4.5 Playback ....................................................................................................................................................... 12

4.6 Snapshot....................................................................................................................................................... 13

4.7 Information .................................................................................................................................................... 13

5. VIDEO VIEWER MISCELLANEOUS CONTROL PANEL...................................................... 14

5.1 Color Setting ................................................................................................................................................. 15

5.2 Backup (For DVR only) ................................................................................................................................. 15

5.3 Record Setting .............................................................................................................................................. 16

5.4 Server Setting ............................................................................................................................................... 18

General ........................................................................................................................................................ 18

Log........................................................................................................................................................ 19

Account................................................................................................................................................. 19

Online User........................................................................................................................................... 20

Trigger .................................................................................................................................................. 21

Network........................................................................................................................................................ 22

DDNS.................................................................................................................................................... 23

SNTP .................................................................................................................................................... 26

FTP....................................................................................................................................................... 26

MAIL ..................................................................................................................................................... 27

Video............................................................................................................................................................ 27

5.5 Tools.............................................................................................................................................................. 28

Firmware Upgrade ....................................................................................................................................... 28

Language Selection ..................................................................................................................................... 29

5.6 Status List...................................................................................................................................................... 29

Record ......................................................................................................................................................... 29

Event............................................................................................................................................................ 30

Backup (For DVR only) ................................................................................................................................ 31

Playback Screen .......................................................................................................................................... 31

6. IE WEB BROWSER ...............................................................................................................33

6.1 Access the Camera from an IE Web Browser ............................................................................................... 33

6.2 Toolbar Display on the IE Web Browser........................................................................................................ 33

7. QUICKTIME PLAYER ............................................................................................................ 35

APPENDIX 1 RECORDING TIME TABLE ................................................................................. 36

APPENDIX 2 USER LEVEL FOR REMOTE OPERATION........................................................ 39

APPENDIX 3 DEFAULT VALUE ................................................................................................ 41

Page 4

PRODUCT OVERVIEW

-1-

1. PRODUCT OVERVIEW

1.1 Description

This camera series is a network-based digital surveillance device with a built-in web server for the purpose of remote

monitoring and recording. It supports TCP/IP networking for live video transmission in the format of H.264, MPEG4 or

MJPEG, and you can easily operate the camera via the web browser or the supplied video viewer AP software. Video

surveillance over IP network infrastructure is available and easy from anywhere, at anytime.

1.2 Features

 Low-latency video streaming for sharp and clear images

 Hybrid digital / analog video output

 Motion detection

 Complete IP surveillance system, such as the Central Management System (CMS) software, Network-Attached

Storage (NAS), Network Video Recorder (NVR), etc.

 External microphone in / audio out for two-way voice communication (AVI202 / 203 / 212 only)

 Day/night functionality (AVI202 / 203 / 212 only)



Alarm notification (AVI202 / 203 / 212 only)

1.3 Package Contents

□ Network camera □ Quick user guide □ Adapter and power cord (optional) □ Bracket

□ CD-ROM disc for user manual & licensed software

“Video Viewer”

□ RJ45 network cable (optional)

Page 5

PRODUCT OVERVIEW

-2-

1.4 Specifications*

SPECIFICATIONS AVI201 AVI202 AVI203 AVI212

▓ Network

LAN Port YES

LAN Speed 10/100 Based-T Ethernet

Supported Protocols

DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP,

ICMP, SMTP, FTP, HTTP, RTP, RTSP

Frame Rate NTSC:30, PAL:25

Number of Online Users 10

Security Multiple user access levels with password

Web management software YES (Control up to 16 network cameras simultaneously)

▓ Video / Audio

Video Compression MPEG4 / MJPEG H.264 / MPEG4 / MJPEG MPEG4 / MJPEG

Video Remote Control YES

Video Adjustment Brightness, Contrast, Saturation and Hue

Audio Compression NO uLaw , 128kbps

Audio Input NO Built-in Microphone, External Microphone Input

Audio Output NO YES

▓ Camera

Image Sensor 1/3.6" image sensor 1/3” CCD image sensor 1/3.6" image sensor

Pixels 738(H) x 480(V)

NTSC: 512(H) x 492(V) /

PAL: 512(H) x 582(V)

738(H) x 480(V)

Lens f3.6mm f4.6mm f3.6mm f4.6mm f3.6mm

F-number F2.0 F1.9 F2.0

Viewing Angle 80° 55.6° 80° 60° 80°

Shutter Speed 1 / 60 (1/50) to 1 / 100,000 sec.

IR LED NO YES

Min Illumination 1 Lux / F2.0

1 Lux / F2.0;

0 Lux (10m IR ON)

0 Lux (11m IR ON)

1 Lux / F2.0;

0 Lux (10m IR ON)

Video Output 1.0 Vp-p. 75Ω

BLC AUTO

White Balance ATW

▓ Others

Remote Control YES

Motion Detection YES

Alarm and event Notification NO Image upload over FTP and Email

General I/O NO Alarm in x1

Power DC12V, 0.5A DC12V, 1A PoE (Power over Ethernet)

Operating Temperature 0~40℃

Humidity 85%

Minimum Web Browsing Requirements

‧Pentium 4 CPU 1.3 GHz or higher, or equivalent AMD ‧256 MB RAM ‧AGP graphics card, Direct Draw, 32MB RAM ‧Windows XP, Windows 2000 Server, ME, 98, DirectX 9.0 or later ‧Internet Explorer 6.x or later

Dimensions (L x W x H)** 152.5 x 115.2 x 40.2 mm (6.00” x 4.54” x 1.58”)

Shipping Weight 812g (1.79 lbs) including mounting bracket and power supply

Indoor / Outdoor Application Indoor

* The specifications are subject to change without notice.

** Dimensional tolerance: ± 5mm

‧ Dimensions: 152.5 (L) x 115.2 (W) x 40.2 (H) mm

Page 6

HARDWARE OVERVIEW

-3-

2. HARDWARE OVERVIEW

2.1 Rear Panel

VIDEO

12V DC

LAN

Reset Default

Video Output

Power Indicator

Power Connector

LAN

AVI201

VIDEO

12V DC

ALARM

LAN

AUDIO

OUT

AUDIO

Reset Default

Audio Output

Audio Input

Video Output

Power Indicator

Power Connector

LAN

Alarm Connector

AVI212 / AVI203 / AVI202

CONNECTOR / BUTTON DESCRIPTION

Reset Default This button is hidden in the pinhole. Press and hold the reset button until the network camera

rebooted. This will reset all parameters, including the IP address to factory default settings.

Power Indicator When the camera is power-supplied, this indicator will be on as red.

Audio Output (AVI202 / AVI203 / AVI212 only)

Support the connection to an audio device, such as a speaker, for voice transmission of the remote side.

Audio Input (AVI202 / AVI203 / AVI212 only)

Support the connection to an audio device, such as a microphone, for voice transmission of the local side.

Video Output Connect to the video input connector of your monitor with a video cable (i.e. a RCA line with the

BNC connector, or a coaxial line) for video output. * The video cable is optional.

LAN Connect the camera to the network with the supplied RJ45 cable.

Power Connector Connect the DC 12V adapter for power supply.

Alarm Connector (AVI202 / AVI203 / AVI212 only)

Support the connection to an alarm device for function scalability.

2.2 Upper Side & Underside

Page 7

INSTALLATION

-4-

3. INSTALLATION

3.1 Install the Hardware

This camera can be installed in two ways: ceiling-mounted and desktop. During the installation, please make sure the

upper side of the camera is always facing up, as shown in Figure 1 below, regardless of which installation way you’re using.

This is to ensure the video output won’t be up side down.

Note: The illustrations below are based on the ceiling-mounted installation.

Note: For the detailed cable connection, please refer to the section “2.1 Rear Panel” on Page 3.

Tool needed: Power drill x 1 (not supplied within the sales package)

1. Prepare all the parts needed for camera installation.

Find the network camera, bracket package, a bag of screws & wall plugs, and a cap supplied with the sales

package, as shown in Figure 1.

Unpack the bracket package to find the bracket disassembled into three parts: the base, stem and joint lock.

Figure 1: Parts needed for camera installation

2. Fix the base of the bracket.

Fix the base of the bracket with the supplied 3

screws to the place you want to install by using a

power drill.

Figure 2: Screw the base to the ceiling

Page 8

INSTALLATION

-5-

3. Assemble the bracket:

a). Align the stem with the central hole of the base, and rotate it to secure, as shown in Figure 3.

b). Align the joint lock with the stem, and rotate it to secure, as shown in Figure 4.

Figure 3: Connect the stem to the base Figure 4: Connect the joint lock to the stem

4. Connect the camera to the bracket.

Ceiling-mounted:

With the upper side of the camera facing up, align the

mounting screw hole on the upper side with the screw

thread of the joint lock, and rotate the camera to

secure, as shown in Figure 4.

Desktop:

With the upper side of the camera facing up, align the

mounting screw hole on the underside with the screw

thread of the joint lock, and rotate the camera to

secure.

Figure 4: Connect the camera to the bracket Figure 5: Insert the cap to the camera

5. Insert the cap to the other mounting screw hole of

the camera.

Ceiling-mounted:

Insert the cap to the mounting screw hole on the

underside of the camera, as shown in Figure 5.

Desktop:

Insert the cap to the mounting screw hole on the

upper side of the camera.

6. Adjust the viewing angle of the camera, and fasten

the joint lock to fix the angle. The installation is

completed, as shown in Figure 6.

Figure 6: Finish the installation

Page 9

INSTALLATION

-6-

3.2 Assign an IP address and Access the Camera

Step 1. Install the Software

Place the supplied Video Viewer AP software CD into your DVD- / CD-ROM drive. The installation process will

automatically start. Follow the on-screen instructions to install the application programs. After installation, a “Video

Viewer” shortcut icon will be shown on your PC desktop.

Step 2. Connect the network camera to the LAN access via a RJ-45 network cable.

Step 3. Search the available IP address to login

a) Double-click “ ” icon on your PC desktop to enter the Video Viewer control panel. By defaults, the “Address

Book” ( ) panel will be displayed on the right side of the Video Viewer control panel.

b) Click ” ” (Search)  ” ” (Refresh) to search the available IP address(es). The found address(es)

will be listed, and can be added into the address book by clicking ” ” (Add into address book).

For details, please see “ ” (Search) on Page 9.

c) Select the IP address you just added into the address book, and click “ ” (Edit) to edit the settings.

d) Double-click the IP address in the address book to log in.

Note: Your PC / laptop and DVR must be under the same domain to build an area network. Please change the

IP address of your PC / laptop into 192.168.1.X (X can be the number between 1~255, except 10) to login. The default IP address of your DVR is 192.168.1.10, and the default username as well as the password is admin.

Note: F or detailed network settings under different network types (Static IP / PPPOE / DHCP), please refer to

“Network” on Page 22 and “DDNS” on Page 23.

‧ If you cannot search any available IP address, please follow the instructions below.

Step 4. Add the IP address and other network settings to login

a) Double-click “ ” icon on your PC desktop to enter the Video Viewer control panel. By defaults, the “Address

Book” panel will be displayed on the right side of the Video Viewer control panel.

b) The default network camera settings are as follows:

Item Default Setting

IP Address 192.168.1.10

User Name admin

Password admin

Port Number 80

c) Click ” ” (Address Book)  ” ” (Add) button to key in the IP address, user name, password, and

port number of the network camera you intend to connect.

Item Default Setting

IP Address 192.168.1.10

User Name admin

Password admin

Port Number 80

d) Double-click the IP address you just added into the address book to log in.

Page 10

VIDEO VIEWER BASIC OPERATION

-7-

4. VIDEO VIEWER BASIC OPERATION

4.1 The Live View Page

After setting up the network information, login user name and password, double-click “ ” on the PC desktop to open

and log into the Video Viewer control panel. You will see a screen similar to the following with 6 major sections:

‧ Connect to only one network camera ‧ Connect to multiple network cameras (e.g. 4 cameras)

‧ 1-cut display ‧ 4-cut display

NO. Button Function Description

①

Image Display

To switch to another camera view if two or more network cameras are connected,

click the corresponding blue tab. The camera title shown in the blue tab can be

customized (For example, “01”, “02”, “03” and “04”). The default camera title is

“Camera1”. For detailed camera title setting, please refer to “General” on Page

18. The software can control up to 16 network cameras simultaneously.

Scale

Click to view the images in the 1-cut, 4-cut, 9-cut and 16-cut mode.

Full Screen

Click to view the images in the full screen mode. To exit the full screen mode,

press “Esc” key on the keyboard of the PC.

Click to close the current image display view.

If the image display view is closed, you will be logged out automatically.

Close All

Click to close all the current image display view.

If the image display view is closed, you will be logged out automatically.

②

Address Book

Click to show the predefined IP address(es). You can add, remove or search the

IP address to log in the network camera remotely.

③

Emap

Click it to show the emap screen in which you can see where the connected

cameras are and watch the live display of every camera.

④

Miscellaneous

Control

Click to show the main operation functions: audio volume control, color setting,

backup, record setting, server setting, upgrade, and find status log list.

⑤

Record /

Stop Record

Click to start / stop the manual recording.

⑥

Snapshot

Click to take a snapshot of the current view. The snapshot will be saved in the path

you specified in “5.3 Record Setting” on Page 16.



Information

Click to show the current network connection details.

Page 11

VIDEO VIEWER BASIC OPERATION

-8-

4.2 Address Book

This view is displayed when the Video Viewer is activated for you to log in / out the network camera from the current

address list, or search the available IP address as follows:



((AAddddrreessss BBooookk))

Click to view the pre-defined network camera access details.

To log in, choose one IP address from the address list, and click the address twice; to log out, click the connected

IP address twice.

You can also create new IP address information, or modify or remove the current IP address information.

NO. Button Function Description

Add

Click to directly add one IP address for login. Key in all the network camera access information needed, and click “Apply” and “Close” to add the selected address to the address book.

Edit

Select one current IP address from the address list, and click this button to edit the settings.

Remove Select one IP address from the address list, and click this button to delete it.

Record

Check this checkbox to enable the record settings. For details, please refer to

the “5.3 Record Setting” on Page 16. The default setting is unchecked.

Page 12

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-9-



((SSeeaarrcchh))

Click to search and view the available IP address(es) for the network camera connection. You can choose one

address to add into the address book, edit the details, or update the address list.

NO. Button Function Description

Add into

address book

Select from the available IP address list, and click this button. Key in the network camera access information needed, and click “Apply” and “Close” to add the selected address to the address book.

Setting

Select from the available IP address list, and click this button to edit the setting.

Refresh Click to update the available IP address list.

4.3 Emap



((CCoonnffiigguurree))

Click on the top bar, you will see the default emap screen. Then, click “ ” (Configure) to enter the

screen for emap setting.

Step 1: Click “ ” to load a .JPEG or .BMP file of the emap. If the picture is too large, you can tick off “Scale” to

zoom it out.

Step 2: Drag the IP address of the connected camera onto the picture to set its location, and the IP address will

be ticked off . After placing all the cameras, click “Apply” to confirm the setting. Then you will see the following screen.

Page 13

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-10-

Step 3: If you want to relocate the cameras, you can click “ ” (Configure), and then move the cameras on the

emap at will. You can also click “Remove” / “Remove All” to remove a camera or all the cameras on the

emap.



LLiivvee ddiissppllaayy oonn tthhee eemmaapp

Double click the icon of the camera on the emap. The live display of this camera will be shown.



MMoottiioonn ttrriiggggeerr pprroommpptt

You can also see the prompt icon of motion trigger if any motion is detected.

Note: Please make sure you’ve activ ated the motion detection functi on at first. For the details about motion

detection setting, please refer to “Trigger” on Page 21.

Live Display Motion Trigger Prompt

Page 14

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-11-

4.4 Manual Record

1) Choose the record type and assign the record location

Click “ ” (Miscellaneous Control) → “ ” (Record Setting) to go to the “Record Setting” page. Check the record

type “Manual”, and assign the location to save the recordings by double-clicking the “Video Path” cell.

2) Start manual recording

Once the “Manual” checkbox is checked in the “Record On/Off” section, check the “REC” box in the address book

panel “ ” to start manual recording. When the record function is started, a flashing indication icon will be shown at the bottom right corner of the image display view. And the recordings will be saved in the specified location.

3) If you want to stop recording, click “ ” on the top bar or cancel ticking off “REC” in the address book

Note: For detailed schedule record setting, motion-triggered and alarm-triggered recording, please refer to

“5.3 Record Setting” on Page 16 and “Trigger” on Page 21.

Page 15

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-12-

4.5 Playback

To play a recording, click “ ” (Miscellaneous Control) → “ ” (Status List), and select the “Record” tab. A list of

all the recordings will be shown by defaults, and you can also sort out the logs you want to speed up the search time.

For details, please see “5.6 Status List” on Page 29.

To immediately play a recording file, select a log from the list, and click “Play” button, or double-click the selected log.

Then, the playback control panel will be shown at the bottom of the main control panel similar to the following. For the

playback control panel details, please see “Playback Screen” on Page 31.

Page 16

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-13-

4.6 Snapshot

To take a snapshot of the current view, click “ ” (Snapshot) on the main control panel. Once the current view is

captured, you’ll see an icon “ ” shown at the bottom right corner of the image display view.

The snapshot will be saved in the path you specified in “

” (Record Setting). For snapshot path setting, please

refer to “5.3 Record Setting” on Page 16.

4.7 Information

Click this button to show the current network connection details:

1) IP Address 7) Resolution

2) Transfer Type 8) Quality

3) Stream Format 9) Server Time

4) AV Option 10) Online Users

5) Bit Rate 11) Handler Name

6) Frame Rate 12) Current Disk

Page 17

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-14-

5. VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

Click “ ” (Miscellaneous Control) on the Video Viewer control panel, and 7 functions are available as follows:

Click the button to show the current version of the Video Viewer.

he audio / broadcast function is only for AVI202, AVI212 and AVI203 models.

NO. Button Function Description

Audio On / Off

Click this button to turn on / off the audio function of the network camera.

Broadcast On / Off

Use the broadcast function from your PC to the connected network

cameras. Please make sure the following items are ready before using this

function.

‧ Your PC is connected to a microphone device and has the Video Viewer

software installed.

‧ The connected network cameras are connected to speakers.

‧ The audio function of the connected network cameras is turned on ( ).

Audio Volume Control

To adjust the volume of the audio, press and drag the volume slider.

Color Setting

Click this button to adjust the brightness / contrast / hue / saturation for the

selected network camera. For details, please see “5.1 Color Setting” on

Page 15.

Backup

(For DVR only)

The network cameras don’t support network backup function. This function

is available when the Video Viewer is connected to a DVR. You can log into

the DVR via this software and remotely backup the video data saved in the

DVR. For details, please see “5.2 Backup” on Page 15.

Record Setting

Click this button to go to the detailed record setting. For details, please refer

to “5.3 Record Setting” on Page 16.

Server Setting

Click this button to go into the detailed server setting. For details, please

refer to “5.4 Server Setting” on Page 16.

Tools

Click this button to update the firmware version of your network camera. For

details, please refer to “5.5 Tools” on Page 28.

Status List

Click this button to view all the record list and login/logout event list, search

the desired log list(s) by date, or playback the recording of the selected log

list. For details, please refer to “5.6 Status List” on Page 29 .

Page 18

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-15-

5.1 Color Setting

In the live view page, choose the desired network camera from the image display tab. Click “ ” (Miscellaneous

Control) → “ ” (Color Setting) to go into the “Color Setting” page, and you can adjust the brightness / contrast /

hue / saturation for the selected network camera.

Click “ ” (Set) to apply the change to the selected network camera. Click “ ” (Default) and click “ ”

(Set) to return to the default color settings.

Note: You need to be a supervisor to operate this function. For details, please see “Account” on Page 19.

5.2 Backup (For DVR only)

The network cameras don’t have network backup function. This function is available when the Video Viewer is

connected to a DVR. You can log into the DVR via this software and remotely backup the video data saved in the DVR.

Click “ ” (Miscellaneous Control) → “ ” (Backup) to go into the “Backup” page, and you can select a specific

time range or event to make a video backup of the recorded files saved in the DVR.

Note: You need to be a supervisor to operate this function. For details, please see “Account” on Page 19.

Page 19

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-16-

NO. Function Description

IP Address / Port / User Name / Password

Select the IP address of the desired network camera from the drop-down list and check if the network information is correct.

HDD Number / Channel

Specify the hard disk (HDD Number) and channel number (Channel) within which have the video data you need.

Filter the recorded video by time

Specify the time range within which has the video data you want in the “Start Time” and “End Time” columns.

Filter the recorded video by event

Select an event type from the event list. This list shows all logs in the specified network storage device from the latest to the earliest.

‧To quickly find the events you need, check or uncheck the event type

“System” / “Manual” / “Alarm” / “Motion”, and select the log you want.

‧To view the earlier or later logs that are not shown in the current page,

click “Prev. Page” or “Next Page”.

‧To refresh the event list, click “Reload”.

File Path Assign the location where the backup files are saved.

Simultaneous Playback

To view the backup images simultaneously when the download process is in progress, select the checkbox “Simultaneous Playback”. You will see the backup images while the images are being downloaded to the PC or notebook.

To simply backup images without previewing, deselect the checkbox “Simultaneous Playback”. You will only see a message box indicating the total time needed, the current status and the saving location.

Download / Cancel Click “Download” to start or “Cancel” to discard the video backup.

5.3 Record Setting

Click “ ” (Miscellaneous Control) → “ ” (Record Setting) to go into the “Record Setting” page, and you can set

which type of the recording is enabled (Manual / Schedule / Motion / Alarm), and where the recorded data / snapshots

are saved.

Note: Once all the record settings are finished, please check the “REC” checkbox in the address book panel

“ ” to start manual recording. Please refer to “Address Book” on Page 8.

Record On/Off

In this section, you can select which type of the recording will be enabled. There are 4 options: Manual / Schedule /

Motion / Alarm.

Prev / Post Event Record Time

In this section, you can set the pre- / post-event record time from 0 ~ 10 seconds by pressing and dragging the slider.

Page 20

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-17-

Hard Disk Overwrite

Check this checkbox to overwrite from the oldest recorded data when the HDD is full.

Record Time Range

There are two options available for you to set the recording time: Weekly & Custom.

 Weekly

Choose the time box(es) within which you want to enable the recording. The time scale is from 0 ~ 24 hours per

day, and there are 3 time lines for each weekday, representing 3 different recording types.

When you select the time box(es), you may see the color orange, pink or blue:

orange => the 1st line, schedule record

pink => the 2nd line, alarm record

blue => the 3rd line, motion record

Tip: To set schedule record, alarm record and motion record all at once for the whole week, press “＋” button.

To clear all record time settings, press “－“ button.

 Custom

To specify the more specific time for recording, click “Custom”.

a). Select the desired record type(s) (Schedule / Motion / Alarm), and set the start & end date and time.

b). Press “Add”, and a pop-up window will appear and ask you to confirm your setting. Click “OK” to add the

record setting, or “Cancel” to discard the setting.

c). After adding the record setting, you will see the item(s) you added in the custom record list.

To delete a certain item, choose the item you want to delete, and click “Delete”.

To modify a certain item, choose the item you want to modify, change the start time and end time, and click

“Update”.

Page 21

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-18-

Record Path

Select and view the location for saving the recorded video and snapshot pictures.

To change the saving path for the recorded video clips or snapshots, check the drive you want, click the cell of “Video

Path” or “Picture Path” twice, and select a new path for saving the video clips or snapshots.

5.4 Server Setting

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) to go into the “Server Setting” page, and you can view,

set or modify all the network camera setting. All the changes you make here will be applied to the connected network

camera.

Note: You need to be a supervisor to operate this function. For details, please see “Account” on Page 19.

General

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” to go into the “General” page. In

“General” page, you will see the following items:

Item Description

Firmware Version Display the current firmware version of the network camera.

MAC Address Display the MAC address of the network camera.

Title Provide a title for the network camera. Only 15 characters are allowed. The default camera title is

“Camera1”.

Page 22

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-19-

Log

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Log” to go into the “Log” page. In

the “Log” page, you can see all the logs for the network camera, such as “Power On”, “Reset Default”, “Net Login” and

“SNTP Update” … etc.

‧To refresh the logs, click “Reload”. ‧To view the earlier or later logs that are not shown in the current page, click “Prev. Page” or “Next Page”. ‧To clear all the logs, click “Clean”.

Account

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Account” to go into the “Account”

page. In the “Account” page, you can create a new account for login, or delete or modify the existing account setting.

To add an account, click “New”, and set the “User Name”, “Password”, “User Level” and “Life Time”. Then, click

“Apply” to save your setting and create a new account.

Page 23

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-20-

‧ To modify an existing account, select the account you want, change the setting, and click “Apply”. ‧ To remove an existing account, select the account you want, and click “Delete”. ‧ To save your changes, click “Apply”.

Column Description

User Name Set a user name that will be used for remote login. The user name allows up to 31 characters.

Password Set the password that will be used for remote login. The password allows up to 31 characters.

Set the security level of an account to give the permission to control different Video Viewer functions. There are 4 user levels: “Supervisor”, “Power User”, “Normal User” and “Guest”.

User Level

For the functions each user level is allowed to access. For details, please refer to APPENDIX 2 USER LEVEL FOR REMOTE OPERATION” on Page 39.

Life Time Select how long this account is allowed to stay online (1 MIN / 5 MIN / 10 MIN / 1 HOUR / 1 DAY / INFINITE)

Max User(s) Allow maximum 10 online users simultaneously

Online User

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “OnLineUser”, and you can check

all the online user information. To update the user information, click “Refresh”.

Page 24

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-21-

Trigger

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Trigger” to enter this page.

 Alarm Trigger (Only for AVI202 / 203 / 212):

In this section, you can select to enable the function of alarm trigger.

 Motion Trigger:

Item Description

Motion In this section, you can select to enable the function of motion trigger.

Duration Set the duration time of the motion trigger recording (5 / 10 / 20 / 40 seconds).

Select to enable the function of motion trigger. And then click “Setting” to set the motion detection area.

Function Description

Sensitivity Set the detection sensitivity:

For AVI201 / 202 / 212 - 0 ~ 9，the higher the number, the lower the sensitivity. For AVI203 - Low / Normal / High.

Motion Detection Setting Area

Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the area that is not being detected while the transparent grids are the area under detection. You can set multiple areas under detection.

Select All Click “＋” (Select All) to set the whole area under detection.

Clear All Click “－” (Clear All) to set the whole area undetected.

Page 25

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-22-

Function Description

Apply After setup, click “Apply” to confirm.

 Notify

In this section, you can select to enable the function of E-mail and/or FTP notification.

Item Description

Method

‧Email

If the E-mail notification function is activated, the network camera will send the captured video clip

to the assigned E-mail address(s) once motion-trigger or alarm-trigger recording happened.

‧FTP

If the FTP notification function is activated, the network camera will upload the captured video clip to

the specified FTP site once motion-trigger or alarm-trigger recording happened.

Video Type Display the video type of the notification files. The video type will vary according to the setting of

“Stream Format” in the “

” (Address Book) page.

Total Time If you’ve set the video type as H264 / MPEG4, you can set the record time of the notification video

clip as 1 ~ 5 seconds.

If you’ve set the video type as JPEG, then this option stands for 1 ~ 5 images.

Note: If your network camera & mail server are not connected by LAN, and the network connection is not

stable or failed, the notification method by Email or FTP might be failed.

Note: Sometimes the length of the video clip emailed or uploaded might not be the same as the one you

specified in “T otal Time”. This is because the system can only emailed or uploaded up to 500KB video clip.

Network

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” to go into the “Network” page. In

“Network” page, you can set the network configuration of the network camera.

Select the network type you will be using for the network camera connection. There are 3 network connection

types: Static IP, PPPOE and DHCP.

Note: PPPOE and DHCP network connection types are required to apply the DDNS service to get a

“Hostname” to correspond to a dynamic IP address. Please refer to “DDNS” section for details.

Page 26

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-23-

Function Description

Web Port Typically, the default TCP port used by HTTP is 80. However, in some cases, it is better to change this port number

for added flexibility or security. The valid web port number ranges from 1 to 9999.

Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. “Static IP”

provided by your ISP (Internet Service Provider) means the IP address of the computer is fixed. Key in the server IP address, gateway and network information provided by your ISP provider to configure a static

IP network connection.

PPPOE PPPOE stands for Point-to-Point Protocol over Ethernet. Users can easily have the Internet service as long as

they’re ready for the following things: 1) Insert an Ethernet card into the PC. 2) Obtain the ADSL service via any ISP. 3) Obtain and install the PPPOE software CD.

When everything is ready, choose the “PPPOE” IP type, and key in the user name and password provided by your ISP. Then, select “Network” → “DDNS” to set DDNS settings.

For detailed DDNS settings, please refer to

“DDNS” section.

DHCP This DHCP function needs to be supported by a router or cable modem network with the DHCP service. Choose

the “DHCP” IP type, and select “Network” → “DDNS” to set DDNS settings.

For detailed DDNS settings, please refer to

“DDNS” section.

DDNS

You need to apply a DDNS account before setting PPPOE or DHCP connection. DDNS is a service for transforming

the dynamic IP corresponding to a specific “host name”. Go to a website which provide free DDNS services and apply

a host name.

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” → “DDNS” to enter.

 DDNS Apply:

Under the connection of PPPoE or DHCP, you could key in the domain name which points to the IP address of you

DVR to login. However, you need apply for a DDNS account at first.

Go to http://www.dyndns.com and sign up a DDNS account.

Page 27

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-24-

Enter all the information necessary for signing up an account according to the website instructions.

Then, you will see the screen “Account Created”, and Dyndns will email the instructions to your specified E-mail

1. Key in a user name for login. This name is not equal to the domain name.

2. Key in your E-mail addres

and input it again to confirm.

3. Set the password and input it again to confirm.

4. Click “Create Account”

Page 28

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-25-

address. Please read this email within 48 hours and complete the procedure to activate your account according to the

instructions in the email.

Go to the hyperlink in the email and you will see “Account Confirmed”. Your account is created successfully now. Input

the user name and the password you preset before to log in.

Click “Add Host Services”

Input the user nam

and the password to login.

1. Input a meaningful host name

2. Choose a domain name.

Page 29

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-26-

SNTP

SNTP (Simple Network Time Protocol) is for time setting. Click “ ” (Miscellaneous Control) → “ ” (Server

Setting) → “Network” → “SNTP” to go into the “SNTP” page.

Function Description

GMT (Greenwich Mean Time) Once users choose the time zone, the network camera will adjust the local area time of the

system automatically.

Server Name Users can simply use the default SNTP server (For example, time.stdtime.gov.tw).

Sync Server Time The network camera will synchronize the time with the network time.

FTP

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” → “FTP” to go into the “FTP” page.

Enter the detailed FTP information and press “Apply” to confirm. The information you set here will be applied when the

function of FTP notification is enabled in the "Trigger" menu.

Page 30

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-27-

MAIL

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” → “MAIL” to go into the “MAIL” page.

Enter the detailed E-mail information and press “Apply” to confirm. The information you set here will be applied when

the function of E-mail notification is enabled in the "Trigger" menu.

Function Description

Server Enter the SMTP server address provided from your e-mail system supplier.

Mail From Enter the entire mail address to ensure E-mails will not be blocked by SMTP.

Verify Password Some mail servers are required to verify the password. Please enter the “user name” and

“password”.

Email Address Add the E-mail address(s) of the assigned recipient(s).

Note: Users can assign up to 4 mail accounts for E-mail notification.

Video

Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Video” to go into the “Video” page.

Page 31

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-28-

Item Description

JPEG

Choose the image size (4CIF / CIF) and picture quality (BEST / HIGH / NORMAL / BASIC) when the web transmission format is JPEG.

MPEG

Choose the image size (4CIF / CIF) and picture quality (BEST / HIGH / NORMAL / BASIC) when the web transmission format is MPEG.

H264

Choose the image size (4CIF / CIF) and picture quality (BEST / HIGH / NORMAL / BASIC) when the web transmission format is H264.

Frame Rate

The frame rate allowed to each viewer can be adjusted to adapt to the bandwidth on the network. Set the desired image frequency to the maximum (FULL) or to a specified frame rate (HALF / ONE THIRD / QUARTER / ONE FIFTH / ONE TENTH). The actual frame rate depends on the actual network connection, and may be lower than the specified one.

5.5 Tools

Click “ ” (Miscellaneous Control) → “ ” (Tools) to go into the “Tools” page.

Note: You need to be a supervisor to operate this function. For details, please see “Account” on Page 19.

Firmware Upgrade

In this page, you can upgrade the firmware of your network camera.

Function Description

Update Server Select the IP address of the network camera. Make sure the network settings of the selected

network camera are correct.

Current Version

In the “Firmware” section, you will see the current firmware version.

For example, 1010-1004-1003-1000

Add

To upgrade the firmware version of your network camera, click “Add” to locate and select the firmware files.

There are several upgrade files. Please upgrade one by one.

Update Firmware

To start upgrading the firmware of the network camera, click “Update Firmware” to start the upgrade process. After upgraded, you will see a message shown on the screen:

“Update Firmware Succeeded! Don’t plug off power, the machine will reboot automatically!”

System Backup

(For DVR only)

If you want to backup your system before upgrading the firmware version, select “System Backup” in the “Configure File” section, click “…” to specify the location for saving system backup, and click “Backup” to start the backup process.

Note: The network setting of the camera might restore to defa ult values after upgrade. If this is true, please

set the network information again.

Page 32

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-29-

Language Selection

This software is available in English / Chinese / French / German / Portuguese / Spanish / Japanese.

Select a language from the drop-down list, and press “Apply”. You will be prompted to restart the application to

make this change take effect.

Note: The default language depends on the operation system of your PC. If the language of your operation

system is not supported by this software, English will be the default language.

5.6 Status List

Click “ ” to view all the event and record logs (All), or search for the specific log(s) by date or by record type

(Condition).

There are three types of logs: Record, Backup and Event. To playback the recorded data for a specific record or

backup log, select the log, and double-click to start the video playback.

For detailed playback operation, please refer to “Playback Screen” on Page 31.

Record

Select “Record” to search for the specific log(s) by date or by record type.

Page 33

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-30-

Button / Function Description

Range Unit Set different time range unit (One Day / One Week) of the event logs.

Date Selection (From / To) Choose the specific date range including the event / record logs you might want.

Record Type This section is enabled only when the “Record” tab is selected.

Select the record type you want to search (User / Alarm / Motion).

Query When all the search criteria are set, click to search the specified logs. The result will be

displayed in the log list, arranged by time from the earliest to the latest.

Delete / Delete All Click “Delete” to remove the selected log(s), or click “Delete All” to clear the current log

list.

Tip: To select more logs all at once, press and hold the “Ctrl” key on your keyboard, and click to select the logs you want to remove.

Play Click to play the selected record log. The playback panel will be shown for your

further operation. For playback details, please see “Playback Screen

” on Page 31.

Repair Click to fix the log with errors.

Apply This button is available in the “Record” tab when the “Reserve” checkbox is checked or

unchecked.

If you want to keep an important record log for future reference and it can’t be removed, check the “Reserve” checkbox, and click “Apply”. The selected log will be kept and won’t be deleted when somebody accidentally or intentionally chooses it and click “Delete” or “Delete All”.

Close Click “Close” to quit this window.

Event

Select “Event” to search for the specific event log(s) by date.

Button / Function Description

Range Unit

Set different time range unit (One Day / One Week) of the event logs.

Date Selection (From / To)

Choose the specific date range including the event / record logs you might want.

Query

When all the search criteria are set, click to search the specified logs. The result will be

displayed in the log list, arranged by time from the earliest to the latest.

Delete / Delete All

Click “Delete” to remove the selected log(s), or click “Delete All” to clear the current log

list.

Tip: To select more logs all at once, press and hold the “Ctrl” key on your

keyboard, and click to select the logs you want to remove.

Click “Close” to quit this window.

Page 34

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-31-

Backup (For DVR only)

Select “Backup” to search for the specific log(s) by date.

Button / Function Description

Range Unit

Set different time range unit (One Day / One Week) of the event logs.

Date Selection (From / To)

Choose the specific date range including the event / record logs you might want.

Query

When all the search criteria are set, click to search the specified logs. The result will be

displayed in the log list, arranged by time from the earliest to the latest.

Delete / Delete All

Click “Delete” to remove the selected log(s), or click “Delete All” to clear the current log

list.

Tip: To select more logs all at once, press and hold the “Ctrl” key on your

keyboard, and click to select the logs you want to remove.

Play

Click to play the selected download log. The playback panel will be shown for your further

operation. For playback details, please see “Playback Screen” on Page 31.

Click “Close” to quit this window.

Playback Screen

When you select and play the recorded data for a specific log, you will immediately go into the playback mode, and

the following playback panel appears.

Page 35

VIDEO VIEWER MISCELLANEOUS CONTROL PANEL

-32-

NO. Function Description

Playback / Download Info Display

This area shows the detailed playback / download information, such as the file name, record date and time, and the speed, etc.

Playback Progress Bar This area shows the playback progress and the progress percentage.

Playback Operation

This area is enabled only when the playback is started.

(Rewind) / (Forward) / (Stop) / (Pause) / (Play)

Rewind / Forward

Click once to get 2X fast rewind / forward, twice to get 4X, three times to get 8X, and four times to get 16X the highest.

De-Interlace Click to reduce the vibration of the paused picture.

Page 36

IE WEB BROWSER

-33-

6. IE WEB BROWSER

6.1 Access the Camera from an IE Web Browser

You can view the images or operate your network camera from an IE web browser.

Note: The supported PC operation systems are Windows 2000 and Windows XP.

Step 1: Key in the IP address used by your network camera in the URL address box, such as “http://ipcam.dyndns.org”,

and press Enter. You will be prompted to enter the user name and password to access the network camera.

If the port number your network camera used is NOT 80, you need to key in the port number additionally. The format is “http://ipaddress:portnum”.

Take dynamic IP type as an example: Host name “ipcam.dyndns.org” / Port number “202”. Key in

“http://ipcam.dyndns.org:202” into the URL address box, and press “Enter”.

Step 2: Enter the user name and password, the same as the ones used at the Video Viewer, and press “OK”. You will see

a similar screen as the following when the login information is correct.

6.2 Toolbar Display on the IE Web Browser

NO. Function Description

1 Main

ActiveX / Quick Time

According to the type of web browser on your operating system, choose the ActiveX or

QuickTime controls.

TCP / UDP Choose the internet transmission protocol: TCP / UDP.

BEST / HIGH / NORMAL / LOW Choose the image quality: BEST / HIGH / NORMAL / LOW

VGA / QVGA Choose the image size: VGA (640 × 480) / QVGA (320 × 240).

Audio On / Audio Off

Choose the audio function: On or Off.

(This audio function is only for AVI202 and AVI212 model)

2 Network

Static IP / DHCP / PPPOE / DDNS

In the “Network” page, you can set the network configuration of the network camera. For

details, please refer to “Network” section of the Video Viewer on Page 22.

SNTP

Set the SNTP (Simple Network Time Protocol) for the time setting. For details, please refer

to SNTP” section of the Video Viewer on Page 26.

FTP

Assigned a specific FTP site for the motion/alarm notification function. For details, please

refer to “FTP” section of the Video Viewer on Page 26.

MAIL

Assigned a specific email account for the motion/alarm notification function. For details,

please refer to “MAIL” section of the Video Viewer on Page 27.

Page 37

IE WEB BROWSER

-34-

NO. Function Description

3 Camera

Snapshot Path Set the location where the snapshot pictures are saved.

Frame Rate

According to the bandwidth, set the required frame rate (FULL / HALF / ONE THIRD /

QUARTER / ONE FIFTH / ONE TENTH / ONE FIFTEENTH). For details, please refer to

“Video” section of the Video Viewer on Page 27.

System Type Set the system type of the connected network camera (NTSC / PAL).

Stream Format Select the stream format of the network transmission (MPEG-4 / Motion JPEG).

Maximum Exposure Limits

To compensate for the lighting conditions, the maximum exposure time can be adjusted.

For details, please refer to “Video” section of the Video Viewer on Page 27.

Detection

Motion detection is used to generate a motion trigger whenever a movement occurs in the

video image. Set the motion detection area. For details, please refer to “Trigger” section of

the Video Viewer on Page 21.

Motion Sensitivity Level

Set different motion sensitivity level according to different application. For details, please

refer to ““Trigger” section of the Video Viewer on Page 21.

Color Setting

Adjust the brightness / contrast / hue / saturation for the network camera. For details,

please refer to “5.1 Color Setting” section of the Video Viewer on Page 15.

5 General

Language Support English / Chinese language for the web interface.

Mac Address

Display the MAC address of the network camera.

For details, please refer to “General” section of the Video Viewer on Page 18.

Log

In the “Log” page, you can see all the logs for the network camera, such as “POWER ON”,

“REMOTE LOGIN”, “RESET DEFAULT”, “EMAIL”, “FTP”, “DDNS”, “PPPOE”, “DHCP” and

“SNTP UPDATE”…etc. For details, please refer to “Log” section of the Video Viewer on

Page 19.

Account

Add / Edit / Delete the user name, password, user level and life time for accessing the

network camera. For details, please refer to APPENDIX 2 USER LEVEL FOR REMOTE

OPERATION” on Page 39.

Trigger

Set the motion trigger and/or alarm trigger function, such as “Trigger Motion”, “Trigger

Alarm” and “Trigger Duration”. Set the motion trigger and/or alarm trigger notification

function, such as “Method” and “Record Time”. For details, please refer to “Trigger” section

of the Video Viewer on Page 21.

Configure

Display and upgrade the firmware version of the network camera. For details, please refer

to “5.5 Tools” section of the Video Viewer on Page 28.

6 Snapshot

Click this button to take a snapshot of the current view. The snapshot will be saved in the

path you specified in the “Snapshot Path” of the “Camera” menu from the IE browser.

7 QVGA Resize

Click this button to enlarge the QVGA viewing size in the live view.

Page 38

QUICKTIME PLAYER

-35-

7. QUICKTIME PLAYER

You can also use the QuickTime player to log into the network camera and check the live view only.

Note: QuickTime is Apple’s multimedia softw are. You need to have QuickTime installed in you computer first, and you

can access the network camera to see the live view.

Step 1: Go to Apple’s official website to download QuickTime. The website address is as follows:

http://www.apple.com/quicktime/win.html

a). Click “DDoowwnnllooaadd” to go into the download page, and select to download the free player.

b). Leave your Email address, and press “FFrreeee DDoowwnnllooaadd NNooww” to download the latest QuickTime player.

c). When the download is completed, execute the “QQuuiicckkTTiimmeeIInnssttaalllleerr..eexxee” file, and follow the on-screen

instructions to finish the installation procedure.

Step 2: Open your QuickTime player. Select “File” → “Open URL”, and key in the URL address.

The URL format for MPEG4 IP cameras is “rtsp://ipaddress:port/live/mpeg4”.

The URL format for H.264 IP cameras is “rtsp://ipaddress:port/live/h264”.

For example, if the IP adderss is “avtechipcam.dyndns.org” and port number is “201”, key in

“rtsp://avtechipcam.dyndns.org:201/live/mpeg4” in the URL box. Click “OK” to continue.

Step 3: A pop-up window will appear and prompt you to enter the authentication information. Key in the user name

and password for accessing your network camera. The user name and password are the same as the ones

you use to log into the Video Viewer.

If the information is correct, press “OK” to go on. If not, press “Cancel” to quit the accessing.

Step 4: When the login is successful, you will see a similar screen as the following.

Page 39

APPENDIX 1 RECORDING TIME TABLE

-36-

APPENDIX 1 RECORDING TIME TABLE

The following table lists the recording time table for AVI202 and AVI203 and takes PAL video system image capture

as an example. The compression format for AVI202 is MPEG4, and the one for AVI203 is H.264.

‧ Table 1: static state

Resolution Quality

Frame Rate MB/Hrs Frame Rate MB/Hrs

full 992 full 1044

1/2 728 1/2 440 1/3 552 1/3 304 1/4 458 1/4 240

1/5 442 1/5 198.6

1/10 232 1/10 113.7

Best

1/15 153.2 -- --

full 826 full 396 1/2 490 1/2 193.4 1/3 364 1/3 139.8 1/4 330 1/4 124.2 1/5 296 1/5 95.8

1/10 163.2 1/10 64.5

High

1/15 128.8 -- --

full 490 full 208 1/2 278 1/2 109.4 1/3 226 1/3 85.2 1/4 196.6 1/4 75.2 1/5 180.6 1/5 64.6

1/10 100.8 1/10 45.9

Normal

1/15 79.4 -- --

full 276 full 104 1/2 185.4 1/2 62.8 1/3 147.6 1/3 51.2 1/4 131.8 1/4 50.2 1/5 125.2 1/5 44.2

1/10 68.2 1/10 36

VGA

Basic

1/15 56.8 -- --

full 778 full 136.8 1/2 464 1/2 84.2 1/3 352 1/3 65.2 1/4 292 1/4 63 1/5 262 1/5 52.8

1/10 134.4 1/10 41.1

Best

1/15 78.4 -- --

full 522 full 86.8 1/2 290 1/2 58 1/3 218 1/3 48.2 1/4 187 1/4 45.8 1/5 170.2 1/5 41.6

1/10 91.4 1/10 35.1

High

1/15 66.6 -- --

full 288 full 64.2 1/2 172 1/2 47.8 1/3 140.6 1/3 41.6 1/4 124 1/4 39 1/5 111.6 1/5 37.4

1/10 63 1/10 33

Normal

1/15 55.4 -- --

full 166 full 52 1/2 112 1/2 40.8 1/3 91.8 1/3 37.2 1/4 80.6 1/4 35 1/5 83.6 1/5 34.4

1/10 49.4 1/10 31.8

QVGA

Basic

1/15 36.2 -- --

Page 40

APPENDIX 1 RECORDING TIME TABLE

-37-

‧ Table 2: dynamic state

AVI202 AVI203

Resolution Quality

Frame Rate MB/Hrs Frame Rate MB/Hrs

full 978 full 1743 1/2 843 1/2 660 1/3 582 1/3 414 1/4 453 1/4 339 1/5 384 1/5 259.5

1/10 257.1 1/10 135

Best

1/15 174.3

-- -full 951 full 1158 1/2 552 1/2 615 1/3 399 1/3 435 1/4 315 1/4 357 1/5 274.5 1/5 282

1/10 194.1 1/10 159.3

High

1/15 148.8

-- -full 606 full 870 1/2 354 1/2 534 1/3 286.8 1/3 378 1/4 217.8 1/4 303 1/5 201 1/5 261.3

1/10 157.8 1/10 136.2

Normal

1/15 126.9

-- -full 552 full 705 1/2 330 1/2 384 1/3 248.4 1/3 285 1/4 200.1 1/4 207.6 1/5 177 1/5 194.7

1/10 129 1/10 104.1

4CIF

Basic

1/15 104.4

-- -full 909 full 588

1/2 543 1/2 363 1/3 378 1/3 260.4 1/4 278.4 1/4 3676 1/5 255.3 1/5 182.4

1/10 166.8 1/10 105

Best

1/15 121.8

-- -full 543 full 522 1/2 290.4 1/2 275.4 1/3 208.2 1/3 209.4 1/4 167.4 1/4 166.5 1/5 146.4 1/5 151.8

1/10 105 1/10 87.3

High

1/15 80.4

-- -full 348 full 366 1/2 181.5 1/2 231 1/3 136.8 1/3 156.6 1/4 114.3 1/4 138.6 1/5 102.3 1/5 120.6

1/10 81 1/10 73.8

Normal

1/15 67.2

-- -full 202 full 250 1/2 143.4 1/2 166.5 1/3 110.7 1/3 127.8 1/4 93.6 1/4 105 1/5 82.5 1/5 95.4

1/10 66.9 1/10 59.1

CIF

Basic

1/15 62.4

-- --

Page 41

APPENDIX 1 RECORDING TIME TABLE

-38-

‧ Table 3: Suggested Settings

Note: It is recommended to take the following settings for Frame Rate / Resolution / Quality when you use

AVI203 under the upload speed of 2M / 1M / 512Kbps.

H.264 MPEG4 MJPEG

Upload

Speed

Resolution Quality Frame Rate Resolution Quality Frame Rate Resolution Quality Frame Rate

2M 4CIF Normal full 4CIF Normal 1/3 4CIF Normal 1/4

1M 4CIF Normal 1/3 4CIF Normal 1/5 4CIF Normal 1/5

512Kbps 4CIF Normal 1/4 CIF High 1/5 CIF Normal 1/4

Page 42

APPENDIX 2 USER LEVEL FOR REMOTE OPERATION

-39-

APPENDIX 2 USER LEVEL FOR REMOTE OPERATION

● For Video Viewer (AVI201 / 202 / 203 / 212)

Supervisor Power User Normal User Guest

Address Book

● ● ● ●

Emap

● ● ● ●

Miscellaneous Control

Color Setting

●

X X X

Backup

X X X X

Record Setting

● ● ● ●

Server Setting

●

X X X

Tools

* Update

●

X X X

* Language

● ● ● ●

Status List

● ● ● ●

Record

● ● ● ●

Snapshot

● ● ● ●

Information

● ● ● ●

● For Web Browser (AVI201)

Supervisor Power User Normal User Guest

Main

Connection Mode

● ● ● ●

Protocol

● ● ● ●

Quality

● ● ●

Change resolution

● ● ●

Network

DDNS

● ●

X X

SNTP

●

X X X

FTP

● ●

X X

MAIL

● ●

X X

Camera

Color

● ●

X X

General

Log

●

X X X

Account

●

X X X

Trigger

● ●

X X

Configure

●

X X X

Snapshot

● ● ● ●

Page 43

APPENDIX 2 USER LEVEL FOR REMOTE OPERATION

-40-

● For Web Browser (AVI202)

Supervisor Power User Normal User Guest

Main

Connection Mode ● ● ● ●

Protocol ● ● ● ●

Quality ● ● ● X

Change resolution ● ● ● X

Audio function ● ● ● X

Network

DDNS ● ● X X

SNTP ● X X X

FTP ● ● X X

MAIL ● ● X X

Camera

Color ● ● X X

General

Log ● X X X

Account ● X X X

Trigger ● ● X X

Configure ● X X X

Snapshot ● ● ● ●

● For Web Browser (AVI203)

Supervisor Power User Normal User Guest

Main

Stream format ● ● ● ●

Quality ● ● ● X

Change resolution ● ● ● X

Audio function ● ● ● X

Network

DDNS ● X X X

SNTP ● X X X

FTP ● X X X

MAIL ● X X X

Filter ● X X X

UPnP ● X X X

Camera

Color ● X X X

Time ● X X X

General

Log ● X X X

Account ● X X X

Trigger ● X X X

Video ● X X X

Configure ● X X X

Snapshot ● ● ● ●

Page 44

APPENDIX 3 DEFAULT VALUE

-41-

APPENDIX 3 DEFAULT VALUE

‧ Default Value

Items Default Value

‧ Default Network Settings:

User Name admin

Password admin

Port 80

IP Address 192.168.1.10

Page 45

217Z

Chinese_AVI201, 202, 212 manual_V0.82

AVI201 / 202 / 212

網路攝影機

使用手冊

在使用本機前請務必詳細閱讀安全須知及操作說明，並保存此手冊以備後續參考。

產品外觀以實機為主。

Page 46

安全須知

注意

RISK OF ELECTRIC SHOCK

注意：

為減低觸電的可能性，請勿讓此機器暴露在雨中或潮濕的環境下。請務必使用適當的變壓器。本公司不負責賠償任何因不當使用本產品所引起的損害。即使本公司已被告知可能的相關風險，使用者仍應自行承擔不當使用所產生之後果。

圖示說明

此符號用於警告使用者產品機殼內部有 “危險電壓”，觸碰有可能會造成觸電的可能性。

此符號用於告知使用者此機器附有操作與維護指示的重要文件。

本公提供的所有無鉛產品皆符合歐盟有害物質使用限制指引 (Restriction of Hazardous Substances, (RoHS))，意即本公司的生產流程與產品均嚴格遵守無鉛守則，而且不包含該指引內提供的任何有害物質。

此劃叉的滾輪垃圾筒圖示代表在歐盟境內，本產品於丟棄時必須另行收集。此原則適用於您的產品與任何標有此圖示的週邊設備。請勿隨意丟棄這些產品。請洽詢您當地的經銷商，以得知回收此設備的程序。

此機器的製造符合無線電波干擾的規範。

免責聲明

本公司保留可隨時修改或刪除說明書內容的任何權利。本公司不保證此說明書的內容完全無誤、完整或實用。此說明書

內容更改以實際產品為準，將不另行通知。

MPEG-4

授權

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR

THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (　 PEG-4 VIDEO? AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED

BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A

VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.NO LICENSE IS GRANTED OR SHALL BE

IMPLIED FOR ANY OTHER USE.ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL

INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC.SEE

HTTP://WWW.MPEGLA.COM.

版本

韌體版本：1022-1020-1001 Video Viewer AP 軟體：0050

Page 47

目錄

1. 產品概觀 ..............................................................................................................................1

1.1 簡介................................................................................................................................................................ 1

1.2 產品特色......................................................................................................................................................... 1

1.3 包裝明細......................................................................................................................................................... 1

1.4 產品規格......................................................................................................................................................... 2

2. 硬體概述 ..............................................................................................................................3

2.1 背板................................................................................................................................................................ 3

2.2 上方 & 下方................................................................................................................................................... 3

3. 安裝........................................................................................................................................ 4

3.1 硬體安裝......................................................................................................................................................... 4

3.2 指定 IP 位址與存取攝影機 .............................................................................................................................. 6

4. VIDEO VIEWER 基本操作.................................................................................................... 7

4.1 即時影像顯示頁面........................................................................................................................................... 7

4.2 Address Book (連線位址簿)............................................................................................................................. 8

4.3 Manual Record (手動錄影) .............................................................................................................................. 9

4.4 影像回放....................................................................................................................................................... 10

4.5 快照.............................................................................................................................................................. 11

4.6 Information (資訊).......................................................................................................................................... 11

5. VIDEO VIEWER 其他控制功能畫面................................................................................ 12

5.1 顏色設定....................................................................................................................................................... 13

5.2 備份 (限 DVR) .............................................................................................................................................. 13

5.3 錄影設定....................................................................................................................................................... 14

5.4 伺服器設定 ................................................................................................................................................... 16

General (一般設定) ...................................................................................................................................... 16

Log (記錄) .................................................................................................................................................... 17

Account (權限管理) ...................................................................................................................................... 17

Online User (線上使用者)............................................................................................................................. 18

Trigger (觸發) ............................................................................................................................................... 18

Network (網路設定) ...................................................................................................................................... 19

DDNS........................................................................................................................................................... 20

SNTP ...........................................................................................................................................................23

FTP (影像上傳)............................................................................................................................................. 23

MAIL (郵件管理)........................................................................................................................................... 24

Video (影像設定) .......................................................................................................................................... 24

Detection (位移偵測設定) ............................................................................................................................. 25

5.5 Tools (工具) ...................................................................................................................................................25

更新韌體....................................................................................................................................................... 25

5.6 Status List (狀態清單).................................................................................................................................... 26

錄影清單....................................................................................................................................................... 26

登入 / 登出事件清單.................................................................................................................................... 28

備份清單 (限 DVR) ...................................................................................................................................... 28

回放畫面....................................................................................................................................................... 30

Page 48

6. IE 網路瀏覽器 ....................................................................................................................31

6.1 透過 IE 網路瀏覽器存取攝影機 ..................................................................................................................... 31

6.2 IE 網路瀏覽器的工具列說明 .......................................................................................................................... 31

7. QUICKTIME 播放程式........................................................................................................ 33

附錄 1 預設值........................................................................................................................ 34

Page 49

產品概述

-1-

1. 產品概觀

1.1 簡介

此攝影機系列屬於網路型數位監控裝置，內建了網路伺服器以方便進行遠端監控與錄影。此系列還支援 TCP/IP 網路協定，能以 MPEG4 或 MJPEG 的格式來進行即時影像傳輸，而且還能透過網頁或隨附的影像觀看程式 AP 軟體來控制攝影機。不論您身在何時何地，IP 網路影像監控就是如此輕鬆容易。

1.2 產品特色

 影片傳輸不延遲，提供清晰流暢的影像

 數位 / 類比影像輸出

 位移偵測與警報通知功能

 高畫質影像感測器

 支援完整的 IP 監控系統，例如：中控管理系統 (Central Management System, CMS) 軟體、網路儲存設備

(Network-Attached Storage, NAS)、網路影像錄影主機 (Network Video Recorder, NVR) 等等。

 支援外接式聲音輸入 / 聲音輸出，以進行雙向語音傳輸 (僅限 AVI202、212)

 日夜兩用型 (僅限 AVI202、212)

1.3 包裝明細

□ 網路攝影機 □ RJ45 網路線

□ 變壓器與電源線 □ 快速使用指南

□ 支架 □ CD-ROM，內含使用手冊和 Video Viewer 軟體

Page 50

產品概述

-2-

1.4 產品規格

產品規格 AVI201 AVI202 AVI212

▓ 網路

LAN 埠是

LAN 速度 10/100 Based-T Ethernet

支援的協定

DDNS、PPPoE、DHCP、NTP、SNTP、TCP/IP、

ICMP、SMTP、FTP、HTTP、RTP、RTSP

Frame 速度 NTSC：30、PAL ：25

線上使用者人數 10

安全性設定多種使用者存取權限與密碼設定

網路管理軟體是 (最多可同時控制16 隻網路攝影機)

▓ 影音

影像壓縮格式 MPEG4 / MJPEG

遠端控制影像是

影像調整 Brightness、Contrast、Saturation 和 Hue

聲音壓縮格式否 uLaw、128kbps

聲音輸入否內建麥克風、外接麥克風

聲音輸出否是

▓ 攝影機

影像感測器 1/3.6" 影像感測器

像素 738(H) x 480(V)

鏡頭 f3.6mm f4.6mm f3.6mm

F 值 F2.0

角度 80° 55.6° 80°

快門速度 1 / 60 (1/50) to 1 / 100,000 sec

IR LED 否是

最低照度 1 Lux / F2.0 1 Lux / F2.0; 0 Lux (10m IR ON)

影像輸出 1.0 Vp-p. 75Ω

背光補償 (BLC) AUTO

白平衡 ATW

▓ 其他

遠端控制是

位移偵測是

警報與事件通知可設定影像上傳到 FTP 和/或電子郵件位址

輸入/輸出否警報輸入 x1

電源 12VDC、0.2A 12VDC、0.5A PoE (Power over Ethernet)

操作溫度 0~40℃

溼度 85%

網路瀏覽最低設備需求

‧Pentium 4 CPU 1.3 GHz 或更高，或同等級 AMD

‧256 MB RAM

‧AGP 圖形介面卡、Direct Draw、32MB RAM

‧Windows XP、Windows 2000 Server、ME、98、DirectX 9.0 或更新版本

‧Internet Explorer 6.x 或更新版本

尺寸 (長 x 寬 x 高)** 152.5 x 115.2 x 40.2 mm (6.00” x 4.54” x 1.58”)

總重量 812g (1.79 lbs)，內含支架和電源供應器

室內 / 室外應用室內用

* 規格變動以實際產品為準，將不另行通知。

尺寸誤差範圍：± 5mm

‧ 尺寸：152.5 (長) x 115.2 (寬) x 40.2 (高) mm

Page 51

硬體概述

-3-

2. 硬體概述

2.1 背板

連接孔 / 按鈕說明

回復原廠預設值此按鈕是隱藏在針孔之中。請按住此按鈕，直到網路攝影機重新開機為止。此舉將會重設所有參數

回原廠設定值，包括 IP 位址。

電源指示燈將攝影機上電後，此指示燈會顯示為紅色。

聲音輸出 (僅限AVI202 / AVI212)

支援到聲音裝置的連接，例如喇叭，以進行遠端聲音傳輸。

聲音輸入 (僅限AVI202 / AVI212) 支援到聲音裝置的連接，例如麥克風，以進行本機端聲音傳輸。

影像輸出使用影像傳輸線 (例如有 BNC 接頭的 RCA 線，或者同軸電纜) 連接到螢幕的影像輸入孔，以進行

影像輸出。

* 影像傳輸線為選購配備。

LAN 使用隨附的 RJ45 網路線，將攝影機連線上網。

電源插孔連接到 DC 12V 變壓器來提供電源。

警報插孔 (僅限AVI202 / AVI212) 支援到警報裝置的連接。

2.2 上方 & 下方

Page 52

安裝

-4-

3. 安裝

3.1 硬體安裝

本攝影機有兩種安裝方式：吸頂式和桌上式。不論選擇何種安裝方式，請確認攝影機的上方永遠朝上 (如圖 1 所示)，以確保影像輸出不會顛倒。

註：以下安裝圖片皆以吸頂式安裝為範例。

註：如需得知詳細的連接方式，請參閱第 3 頁的 “2. 硬體概述”。

所需工具：電鑽 x 1 (未隨附銷售包裝提供)

1. 備妥安裝攝影機所需的所有組件。如圖 1 所示，在銷售包裝內找出網路攝影機、支架包裝盒、一包螺絲和壁虎，以及一個防塵帽。打開支架包裝盒後，會看到支架被分解成三個部分：底座、聯結桿和聯結鎖。

圖 1：安裝攝影機所需的組件

2. 鎖住支架底座。

先將支架底座鎖在您要安裝攝影機的位置。

圖 2：將底座鎖到天花板

Page 53

VIDEO VIEWER 基本操作

-5-

3. 組合支架： a).將聯結桿對準底座中間的孔，然後旋轉鎖緊 (如圖 3 所示)。 b).將聯結鎖對準聯結桿，然後旋轉鎖緊 (如圖 4 所示)。

圖 3：將聯結桿接到底座圖 4：將聯結鎖接到聯結桿

4. 連接攝影機和支架。

吸頂式：

將攝影機上方的螺絲孔對準聯結鎖的螺紋，然後旋轉鎖緊攝影機 (如圖 4 所示)。

桌上式：

將攝影機下方的螺絲孔對準聯結鎖的螺紋，然後旋轉鎖緊攝影機。

圖 4：連接攝影機和支架圖 5：插入防塵帽

5. 將防塵帽插入攝影機另一個螺絲孔。

吸頂式：

將防塵帽插入攝影機下方的螺絲孔 (如圖 5 所示)。

桌上式：

將防塵帽插入攝影機上方的螺絲孔。

6. 調整攝影機的監視角度，然後鎖緊聯結鎖固定角度。圖 6 為安裝完成圖。

圖 6：安裝完成圖

Page 54

VIDEO VIEWER 基本操作

-6-

3.2 指定 IP 位址與存取攝影機

步驟 1. 安裝軟體

將隨附的 Video Viewer AP 軟體光碟放到 DVD- / CD-ROM 光碟機中。安裝程序會自動啟動。請遵照螢幕上的指示安裝此軟體。安裝完成後，電腦桌面會出現 “Video Viewer” 捷徑圖示。

步驟 2. 使用隨附的 RJ45 網路線讓攝影機連線上網

步驟 3. 搜尋可用的 IP 位址進行登入

a) 連按兩下桌面上的 “

” 圖示進入Video Viewer 控制面板。依據預設， Video Viewer 控制面板右側會顯示 “Address

Book” ( ) 連線位址簿畫面。

b) 按一下 ” ” (Search)  ” ” (Refresh) 搜尋可用的 IP 位址。之後會列出找到的位址。您可以按 “ ”

(Add into address book) 將該位址加入連線位址簿。

詳情請參閱第 9 頁的 “ ” (Search)。

c) 選取您剛加入位址簿的 IP 位址，然後按一下 “ ” (Edit) 編輯相關設定。

d) 連按兩下連線位址簿裡的 IP 位址即可進行登入。

註：如需得知不同網路類型 (Static IP / PPPOE / DHCP) 的網路設定資訊，請參閱第 19 頁的 “Network (網路設定)” 和

第 20 頁的 “DDNS”。

‧ 若找不到可用的 IP 位址，請遵照以下指示進行。

步驟 4. 新增 IP 位址與其他網路設定來進行登入。

a) 連按兩下桌面上的 “ ” 圖示進入 Video Viewer 控制面板。依據預設， Video Viewer 控制面板右側會顯示 “Address

Book” 連線位址簿畫面。

b) 預設的網路攝影機設定如下：

項目預設值

IP 位址

192.168.1.10

使用者名稱

admin

密碼

admin

連接埠號

c) 按一下 “ ” (Address Book)  “ ” (Add) 按鍵輸入您要連線的網路攝影機預設 IP 位址、使用者名稱、密碼

和連接埠號。

項目預設值

IP 位址

192.168.1.10

使用者名稱

admin

密碼

admin

連接埠號

d) 連按兩下您剛加入連線位址簿的 IP 位址進行登入。

Page 55

VIDEO VIEWER 基本操作

-7-

4. VIDEO VIEWER 基本操作

4.1 即時影像顯示頁面

在設完網路資訊、登入使用者名稱和密碼之後，連按兩下電腦桌面上的 “ ” 來開啟和登入 Video Viewer 控制面板。

您會看見類似以下的畫面，分成六個主要區域：

‧ 連接到一台網路攝影機 ‧ 連接到多台網路攝影機 (例如：4 台攝影機)

‧ 1 分割顯示 ‧ 4 分割顯示

NO.

按鈕功能說明

影像顯示

若連接了兩隻或兩隻以上的網路攝影機，按一下對應的藍色標籤即

可切換到另一個攝影機畫面。顯示在藍色標籤上的攝影機名稱是可

以自訂的 (例如：“01”、“02”、“03” 和 “04”)。預設的攝影機名稱為

“Camera1”。如需設定攝影機名稱的相關資訊，請參閱第 16 頁的

“General (一般設定)”。本軟體最多可同時控制 16 隻網路攝影機。

Scale (分割畫面)

按一下可選擇要在單一畫面、4 分割、9 分割或 16 分割模式下觀看

影像。

Full Screen (全螢幕)

按一下可全螢幕顯示影像。若要離開全螢幕顯示，請按一下電腦鍵

盤上的 [Esc] 鍵。

Close (關閉)

按一下可關閉目前的影像顯示畫面。

若關閉影像畫面，您就會自動登出。

Close All (全部關閉)

按一下可關閉所有影像顯示畫面。

若關閉影像畫面，您就會自動登出。

Address Book (連線位址簿)

按一下可顯示預設的 IP 位址。您可以新增、移除或搜尋要遠端登入

的網路攝影機 IP 位址。

Miscellaneous Control

(其他控制功能)

按一下可顯示主要控制功能：聲音頻道選擇、顏色設定、備份、錄

影設定、伺服器設定、升級韌體和尋找事件記錄。

Record (錄影設定)

按一下可開始 / 停止手動錄影。

Snapshot (快照)

按一下可擷取目前畫面的快照。快照影像會儲存在您於第 14 頁的

“5.3 錄影設定” 指定的位置下。

Information (資訊) 按一下可顯示目前的網路連線詳細資訊。

Page 56

VIDEO VIEWER 基本操作

-8-

4.2 Address Book (連線位址簿)

當 Video Viewer 啟動時會顯示此畫面，讓您可以從此畫面登入 / 出網路攝影機，或者搜尋可連線的 IP 位址，畫面如下：



((AAddddrreessss BBooookk))

連連線線位位址址簿

簿

按一下可顯示預設的網路攝影機詳細資訊。

若要登入，請從位址簿選擇一組 IP 位址，然後連按兩下該位址；若要登出，請連按兩下已連線的 IP 位址。

您也可以自訂新的 IP 位址資訊，或者修改或刪除現有的 IP 位址。

NO.

按鈕功能說明

Add (新增)

按一下可新增一組 IP 位址來登入 DVR。輸入所需的網路攝影機存取資訊，然後按一下 “Apply” (套用) 和 “Close” (關閉)，將選取的位址加入連線位址簿。

Edit (編輯)

從位址清單選取一組 IP 位址，然後按一下此按鈕即可編輯設定。

Remove (刪除) 從位址清單選取想要刪除的 IP 位址，然後按一下此按鈕刪除選取的位址。

Record (錄影)

勾選此核取方塊來啟用錄影設定。詳情請參閱第 14 頁的 “5.3 錄影設定”。此

方塊預設為不勾選。

Page 57

AP MISCELLANEOUS CONTROL PANEL

-9-



((SSeeaarrcchh))

搜搜尋

尋

按一下可搜尋和查看可連線的 IP 位址來連接到網路攝影機。您可以選擇一組 IP 位址加入連線位址簿、編輯詳細資訊，或者更新連線位址簿清單。

NO.

按鈕功能說明

Add into address book

(加入連線位址簿)

從可用的 IP 位址清單選取一組 IP 位址，然後按一下此按鈕。輸入所需的網路攝影機存取資訊，然後按一下 “Apply” (套用) 和 “Close” (關閉)，將選取的位址加入連線位址簿。

Setting (設定)

從可連線的 IP 位址清單選擇一組 IP 位址，然後按一下此按鈕編輯相關設定。

Refresh (更新) 按一下可更新連線 IP 位址清單。

4.3 Manual Record (手動錄影)

1) 選擇錄影類型並指定錄影位置

按一下 “ ” (Miscellaneous Control) → “ ” (Record Setting) 進入 “Record Setting” (錄影設定) 頁面。勾選

Manual (手動) 錄影類型，然後連按兩下 “Video Path” (影片路徑) 欄指定要儲存錄影檔的位置。

2) 啟用錄影設定

在 “Record On/Off” (錄影啟動 / 關閉) 一區勾選了 “Manual” (手動) 核取方塊之後，在連線位址簿畫面勾選 “REC” 核取方塊 “ ” 即可啟用錄影設定。

3) 按一下 “ ” (Record) 按鈕開始進行手動錄影

按一下主控制畫面的 “ ” (Record) 就會立即啟動手動錄影，而且錄影檔會儲存在您指定的位置。啟動錄影功能時，

影像顯示畫面的右下方會出現一個閃爍的圓點。

註：如需得知詳細的排程錄影設定、位移偵測設定和警報觸發設定，請參閱第 14 頁的 “5.3 錄影設定”、第 18 頁的 “Trigger

(觸發)”，以及第 25 頁的 “Detection (位移偵測設定)”。

Page 58

AP MISCELLANEOUS CONTROL PANEL

-10-

4.4 影像回放

若要回放錄影檔，請按 “ ” (Miscellaneous Control) → “ ” (Status List)，然後選擇 “Record” (錄影) 標籤。預設

會顯示所有的錄影檔清單，您也可以依類型列出想要的記錄來加快搜尋的速度。詳情請參閱第 26 頁的 “5.6 Status List (狀態清單)”。

若要立即回放某錄影檔，請從清單選取一筆記錄，然後按 “Play” (播放) 按鈕，或者連按兩下選取的記錄進行回放。接著，在主要控制面板下方會出現類似以下畫面的回放控制面板。

有關回放控制面板的詳情，請參閱第 30 頁的 “回放畫面”。

Page 59

AP MISCELLANEOUS CONTROL PANEL

-11-

4.5 快照

若要擷取目前畫面的影像，請按一下主控制畫面的 “ ” (Snapshot)。擷取完影像後，影像顯示畫面的右下角會出現

“ ” 圖示。

快照影像會儲存在您於 “ ” (Record Setting) 指定的位置下。如需得知詳細的快照路徑設定資訊，請參閱第 14 頁的

“5.3 錄影設定”。

4.6 Information (資訊)

按一下可顯示目前的網路連線詳細資訊：

1) IP Address (IP 位址) 7} Quality (影像品質)

2} Transfer Type (傳輸類型) 8} Resolution (解析度) 3} Stream Format (影像格式) 9) Server Time (伺服器時間)

4) AV Option (AV 選項) 10) Online Users (線上使用者人數)

5) Bits Rate (位元傳輸速度) 11) Current Disk Capacity (目前的磁碟空間)

6} Frame Rate (Frame 速度)

Page 60

VIDEO VIEWER 其他控制功能畫面

-12-

5. VIDEO VIEWER 其他控制功能畫面

按一下 Video Viewer 控制面板上的 “ ” (Miscellaneous Control) 會顯示如下的七項功能：

按一下

可顯示 Video Viewer 的目前版本。

聲音

/ 廣播功能僅限 AVI202、AVI212 才支援。

NO.

按鈕功能說明

Audio On / Off

(聲音開 / 關)

按此按鈕可開啟 / 關閉網路攝影機的聲音功能。

Broadcast On / Off

(廣播開 / 關)

在電腦使用廣播功能，將聲音傳到網路攝影機那端。在使用本功能之前，請

確認以下事項已就緒：

‧ 電腦已連接到麥克風裝置，並已安裝 Video Viewer 軟體。

‧ 連線的網路攝影機已接妥擴音器。

‧ 連線的網路攝影機已開啟聲音功能 ( )。

聲音頻道選擇

若要調整音量，請按住並拖曳音量滑桿。

Color Setting

(顏色設定)

按此按鈕可調整選取網路攝影機的亮度 / 對比度 / 色度 / 飽和度。詳情請參

閱第 13 頁的 “5.1 顏色設定”。

Backup (備份)

(限 DVR)

網路攝影機本身並不支援網路備份功能。當 Video Viewer 連線到DVR 時，

才可使用此功能。您可以透過此軟體登入 DVR，並遠端備份儲存在 DVR 內

的影像資料。詳情請參閱第 13 頁的 “5.2 備份 (限 DVR)”。

Record Setting

(錄影設定)

按一下可進入詳細的錄影設定頁面。詳情請參閱第 14 頁的 “5.3 錄影設定”。

Server Setting

(伺服器設定)

按一下可進入詳細的伺服器設定頁面。詳情請參閱第 16 頁的 “5.4 伺服器

設定

”。

Tools (工具)

按一下可更新網路攝影機的韌體。詳情請參閱第 25 頁的 “5.5 Tools (工具)”。

Status List (狀態清單)

按一下可檢視所有的錄影清單和登入/登出事件清單、依日期搜尋要找的記錄，

或者回放選取記錄的錄影檔。詳情請參閱第 26 頁的 “5.6 Status List (狀態

清單)

”。

Page 61

VIDEO VIEWER 其他控制功能畫面

-13-

5.1 顏色設定

在即時畫面下，選取想要變更顏色設定的網路攝影機標籤。按一下 “ ” (Miscellaneous Control) → “ ” (Color

Setting) 進入 “Color Setting” (彩色設定) 頁面，即可調整選取網路攝影機的亮度 / 對比度 / 色度 / 飽和度。

按 “ ” (Set) 可套用變更到選取的網路攝影機。按 “ ” (Default)，再按 “ ” (Set) 可回復預設彩色設定。

註：您必須擁有 ”Supervisor” 的權限才能執行此功能。詳情請參閱第 17 頁的 “Account (權限管理)”。

5.2 備份 (限 DVR)

網路攝影機本身沒有網路備份功能。當 Video Viewer 連線到DVR 時，才可使用此功能。您可以透過此軟體登入 DVR，

並遠端備份儲存在 DVR 內的影像資料。按一下 “ ” (Miscellaneous Control) → “ ” (Backup) 進入 “Backup” (備

份) 頁面，然後就可以選取要遠端備份儲存在 DVR 內的錄影檔，可指定備份特定時間範圍內的影像資料，或者備份特

定事件的影像資料。

註：您必須擁有 ”Supervisor” 的權限才能執行此功能。詳情請參閱第 17 頁的 “Account (權限管理)”。

NO.

功能說明

IP Address (IP 位址) / Port (埠號) / User Name (帳號) / Password (密

碼)

從下拉式清單選擇想要的網路攝影機 IP 位址，然後檢查網路連線資訊是否正確。

HDD Number (硬碟編號) / Channel (頻道)

指定擁有您要備份之資料的硬碟和頻道。

依時間篩選錄影資料

在 “Start Time” (開始時間) 和 “End Time” (結束時間) 欄位指定您要備份的時間範圍。

依事件篩選錄影資料

從右側的事件清單中選取您要下載的特定類型。此清單由上而下會先顯示最近一筆的事件，再依序顯示發生時間較早的事件。

Page 62

VIDEO VIEWER 其他控制功能畫面

-14-

NO.

功能說明

‧若要快速找出想要的事件，請勾選或取消勾選 “System” (系統) / “Manual” (手

動錄影) / “Alarm” (警報) / “Motion” (位移偵測) 事件類型，然後選取想要的事件。

‧若想要查看較早或較晚的事件記錄，而該記錄沒有顯示在目前的頁面中時，請

按一下 “Prev. Page” (前一頁) 或 “Next Page” (下一頁)。

‧若要更新事件清單，請按一下 “Reload” (重新載入)。

File Path (檔案路徑) 指定備份下來的檔案要儲存的位置。

Display (顯示)

若要在下載時同步觀看備份的影像，請先勾選 “Display” (顯示)。您會在下載備份影像到電腦時看見影像內容。

若只要下載備份影像而不要預覽，請取消選取 “Display” (顯示)。您只會看見一個訊息方塊，指出下載所需的總時間、目前的狀態和儲存位置。

Download (下載) / Cancel (取消) 按一下 “Download” (下載) 開始備份影像，或 “Cancel” (取消) 不要備份影像。

5.3 錄影設定

按 “ ” (Miscellaneous Control) → “ ” (Record Setting) 進入 “Record Setting” (錄影設定) 頁面，即可設定要啟用的錄影類型 Manual / Schedule / Motion / Alarm (手動錄影 / 排程錄影 / 位移偵測錄影 / 警報錄影)，以及錄影檔 / 快照要儲存的位置。

註：完成設定後，勾選連線位址簿畫面的 “REC” 核取方塊 “ ”，即可啟用錄影設定。詳情請參閱第 8 頁的 “4.2 Address

Book (連線位址簿)”。

Record On/Off (

錄影開

/ 關)

在此區中，您可以選擇要啟用的錄影類型，選項有四種：Manual (手動錄影) / Schedule (排程錄影) / Motion (位移偵測錄影) / Alarm (警報錄影)。

Page 63

VIDEO VIEWER 其他控制功能畫面

-15-

Prev / Post Event Record Time (

事件前

後錄影時間

)

在此區中，您可以按住並拖曳滑桿來設定事件前 / 後的錄影時間 (0 ~ 10 秒)。

Hard Disk Overwrite (

硬碟覆寫

)

勾選此核取方塊後，在硬碟已滿時，會直接從最舊的錄影檔案開始進行覆寫。

Record Time Range (

錄影時間範圍

)

設定錄影時間的方式有兩種：Weekly (每週) & Custom (自訂)

 Weekly (每週)

選取您要啟用錄影的時間方塊。時間間隔為一天 0 ~ 24 小時，而且每一天都有三條時間軸，各自代表三種不同的錄影類型。選取時間方塊時，您會看見方塊變成橘色、粉紅色或藍色：橘色 => 第一條時間軸，代表排程錄影粉紅色 => 第二條時間軸，代表警報錄影藍色 => 第三條時間軸，代表位移偵測錄影

秘訣：若要一次設定整週進行排程錄影、警報錄影和位移偵測錄影，請按 “＋” 按鈕。若要清除所有錄影時間設定，請按

“－“ 按鈕。

 Custom (自訂)

若要指定特定時間進行錄影，請按 “Custom” (自訂)。

a). 選擇想要的錄影類型 Schedule / Motion / Alarm (排程錄影 / 位移偵測錄影 / 警報錄影)，然後設定開始和結束

日期與時間。

b). 按 “Add” (新增) 後，會跳出蹦現式視窗要求您確認設定。按 “OK” (確定) 新增錄影設定，或按 “Cancel” (取消)

放棄設定。

Page 64

VIDEO VIEWER 其他控制功能畫面

-16-

c). 在新增錄影設定後，會在自訂錄影清單中看見剛加入的項目。

若要刪除特定項目，請選擇要刪除的項目，然後按 “Delete” (刪除)。若要修改特定項目，請選取要修改的項目、變更開始時間和結束時間，然後按 “Update” (更新)。

Record Path (

錄影檔案存放路徑

)

選擇和查看要儲存錄影影片和快照圖片的位置。若要變更錄影檔或快照的儲存位置，請先勾選要用來儲存的磁碟機、連按二下 “Video Path” (影像路徑) 或 “Picture Path” (圖片路徑)，然後選擇要儲存影片檔或快照的新位置。

5.4 伺服器設定

按一下 “ ” (Miscellaneous Control) → “ ” (Server Setting) 進入 “Server Setting” (伺服器設定) 頁面，即可檢

視、設定或修改所有網路攝影機的設定。您在此所做的所有變更都將套用到連線的網路攝影機。

註：您必須擁有 ”Supervisor” 的權限才能執行此功能。詳情請參閱第 17 頁的 “Account (權限管理)”。

General (一般設定)

按一下 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” 進入 “General” (一般設定) 頁面。在

“General” (一般設定) 頁面會看見以下項目：

項目說明

Firmware Version (韌體版本) 顯示網路攝影機目前的韌體版本。

MAC Address (MAC 位址) 顯示網路攝影機的 MAC 位址。

Title (名稱) 為網路攝影機命名。字元上限為 15 個字。預設的攝影機名稱為 “Camera1”。

Page 65

VIDEO VIEWER 其他控制功能畫面

-17-

Log (記錄)

按一下 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Log” 進入 “Log” (記錄) 頁面。

在 “Log” (記錄) 頁面會看見網路攝影機的所有事件記錄，例如：“Power On” (開機)、“Reset Default” (回復預設值)、 “Net Login” (網路登入) 和 “SNTP Update” (SNTP 網路對時) 等等。

‧若要更新記錄，請按 “Reload” (重新載入)。 ‧若想要查看較早或較晚的事件記錄，而該記錄沒有顯示在目前的頁面中時，請按一下 “Prev. Page” (前一頁) 或

“Next Page” (下一頁)。

‧若要清除所有記錄，請按 “Clean” (清除)。

Account (權限管理)

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Account” 進入 “Account” (權限管理)

頁面。在 “Account” (權限管理) 頁面中，您可以建立登入要使用的新帳號，或者刪除或修改現有帳號設定。

若要新增帳號，請按一下 “New” (新增)，然後設定 “User Name” (帳號)、“Password” (密碼)、“User Level” (權限) 和 “Life Time” (登入時間)。接著，按一下 “Apply” (套用) 來儲存設定與完成帳號的建立。

‧ 若要修改現有帳號，請選取想要的帳號、進行修改，然後按一下 “Apply” (套用)。 ‧ 若要刪除現有帳號，請選取想要的帳號，然後按一下 “Delete” (刪除)。 ‧ 若要儲存變更，請按一下 “Apply” (套用)。

欄位說明

帳號設定要用來進行遠端登入的帳號。帳號最多只允許 31 個字元。

密碼設定要用來進行遠端登入的密碼。密碼最多只允許 31 個字元。

User Level (權限)

設定帳號的安全權限，以允許控制不同的 Video Viewer 功能。使用者權限共有四種：“Supervisor” (管理員)、 “Power User” (高級使用者)、“Normal User” (一般使用者) 和 “Guest” (訪客)。

如需得知每種使用者權限可以存取的功能，請見以下資訊：

Page 66

VIDEO VIEWER 其他控制功能畫面

-18-

欄位說明

Supervisor

(系統管理員)

Power User

(超級使用者)

Normal User

(一般使用者)

Guest (訪客)

Address Book (連線位址簿)

● ● ● ●

Miscellaneous Control (其他控制功能)

Color Setting

(彩色設定)

●

X X X

Backup

(備份)

●

X X X

Record Setting

(錄影設定)

● ● ● ●

Server Setting

(伺服器設定)

●

X X X

Tools (工具) ●

X X X

Status List

(狀態清單)

● ● ● ●

Record (錄影設定) ● ● ● ● Snapshot (快照) ● ● ● ● Information (資訊) ● ● ● ●

Life Time (登入時間)

選擇此帳號可停留線上的時間：1 MIN (1 分鐘) / 5 MIN (五分鐘) / 10 MIN (10 分鐘) / 1 HOUR (1 小時) / 1 DAY (1 天) / INFINITE (永久)

Max User(s) (最大上線人

數)

最多可允許 10 名使用者同時上線。

Online User (線上使用者)

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” (一般設定) → “OnLineUser” (線上使用

者)，便可以查看所有的線上使用者資訊。若要更新使用者資訊，請按一下 “Refresh” (更新)。

Trigger (觸發)

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” (一般設定) → “Trigger” (觸發) 進入此頁

面。

Page 67

VIDEO VIEWER 其他控制功能畫面

-19-

‧ AVI201 ‧ AVI202 / AVI212

 位移偵測觸發：

您可以在此區選擇啟用位移偵測觸發功能。在啟用此功能之前，請先設定位移偵測區域。如需得知位移偵測區域設定的詳細資訊，請參閱第 25 頁的 “Detection (位移偵測設定)”。

項目說明

Motion (位移偵測) 您可以在此區選擇啟用位移偵測觸發功能。

Duration (持續時間) 設定位移偵測觸發時的錄影時間 (5 / 10 / 20 / 40 秒)。

 警報觸發 (僅限 AVI202 / 212)：

您可以在此區選擇啟用警報觸發功能。

 Notify (通知)

您可以在此區選擇啟用 E-mail 和/或 FTP 通知的功能。

項目說明

Method (方式)

‧Email 通知：

若啟動了 E-mail 通知功能，網路攝影機就會在觸發位移偵測錄影或警報錄影時，將拍攝

的影像片段寄到指定的 E-mail 信箱。

‧FTP 通知：

若啟動了 FTP 通知功能，網路攝影機就會在觸發位移偵測錄影或警報錄影時，將拍攝的

影像片段上傳到指定的 FTP 位置。

Video Type (影片類型)

顯示觸發後拍攝檔案的影片類型。影片類型會依 “

” (Address Book) 頁面的 “Stream

Format” (線上傳輸格式) 設定而有所不同。

Tota l ( 總秒數) 設定影片片段的錄影時間 (1 ~ 5 秒)。

Network (網路設定)

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” (網路設定) 進入 “Network” (網路設定)

頁面。在 “Network” (網路設定) 頁面，您可以設定網路攝影機的網路連線資訊。

Page 68

VIDEO VIEWER 其他控制功能畫面

-20-

選擇要用來連接到網路攝影機的網路類型，共支援 3 種網路連線類型：Static IP (固定 IP)、PPPOE 和 DHCP。

註： PPPOE與 DHCP網路類型皆需要申請 DDNS服務以取得一個 “主機名稱” 來對應浮動的IP位址。詳情請參閱 “DDNS”

一節。

功能說明

Web Port (埠號) 一般而言，HTTP 所使用的 TCP 埠多半為 80 埠。然而有些情形下，建議您最好變更此埠值以增加彈性或安全

性。有效數值範圍為 1 到 9999。

Static IP (固定 IP) 電腦間的溝通與識別是透過其在網路上的唯一的 IP 位址來達成。由網路 ISP 業者提供的 “固定 IP” 意即電腦

的 IP 位址是固定的，而且適合用於建立網站。請輸入您的網路 ISP 業者提供的伺服器 IP 位址、閘道和網路資訊，來設定固定 IP 網路連線。

PPPOE PPPOE 為 Point-to-Point Protocol over Ethernet 的英文簡稱。只要準備好以下事宜，使用者就可以隨時輕鬆

使用網路服務：1) 將乙太網路卡插入電腦。2) 透過網路 ISP 業者取得 ADSL 服務。3) 取得並安裝 PPPOE 軟體光碟。

完成上述事宜後，請選擇 “PPPOE” 網路類型，然後輸入您的網路 ISP 業者所提供的帳號和密碼。接著，選擇 “Network” (網路設定) → “DDNS” 來設定 DDNS。

詳細的 DDNS 設定資訊，請參閱 “DDNS” 一節。

DHCP 您所使用的路由器或數據機必須支援 DHCP 功能才可使用 DHCP 服務。選擇 “DHCP” 網路類型，然後選擇

“Network” (網路設定) → “DDNS” 來設定 DDNS。

詳細的 DDNS 設定資訊，請參閱 “DDNS” 一節。

DDNS

在設定 PPPOE 或 DHCP 連線方式之前，您必須先申請一個 DDNS 帳號名稱。DDNS 是一種服務，可將浮動 IP 位址轉換對應至一個特定的 “主機名稱”。請至有提供免費 DDNS 服務的網站，然後申請一個主機名稱。

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” (網路設定) → “DDNS” 進入設定頁

面。

 DDNS 申請：

在設定 PPPoE 或 DHCP 連線方式之前，您必須先申請一個 DDNS 帳戶名稱。DDNS 是一種服務，可將浮動IP 位址轉換對應至一個特定的「Hostname」(主機名稱)。請參閱以下步驟。

‧ 到有提供免費 DDNS 服務的網站，申請一個 “Hostname”。例如，DynDNS 網站 (http://www.dyndns.com)。

Page 69

VIDEO VIEWER 其他控制功能畫面

-21-

‧ 依據網站上的指示，輸入所有簽署帳號所需提供的資訊。

‧ 當完成申請後，您可以看到 “Account Created” 的畫面(帳號已建立)，Dyndns 系統會寄相關指示到您的電子信箱，

以讓您完成接下來的帳號啟動。您必須遵照電子確認信中的指示，完成啟動帳號的程序。也就是說，在接獲電子確認信後，必須於 48 小時內到指定網址完成帳號啟動設定。完成帳號啟動後，您會看到 “Account Confirmed” 的視窗。代表您的帳號已經成功建立。

Page 70

VIDEO VIEWER 其他控制功能畫面

-22-

‧ 請使用申請的 DDNS 帳號、密碼登入 DynDNS，並按 ”My Service” 按鈕。

‧ 按 ”Add Host Services” 按鈕。

‧ 按 ”Add Dynamic DNS Host” 按鈕。

‧ 輸入並選擇主機名稱。

Page 71

VIDEO VIEWER 其他控制功能畫面

-23-

‧ 主機名稱已建立。您可使用 DDNS 服務所取得的「主機名稱」做為虛擬的固定 IP 位置，來對應浮動 IP 位址。

SNTP (網路對時)

SNTP (Simple Network Time Protocol / 網路對時) 頁面可用來設定時間。按 “ ” (Miscellaneous Control) →

“ ” (Server Setting) → “Network” (網路設定) → “SNTP” (網路對時) 進入 “SNTP” (網路對時) 頁面。

功能說明

GMT (Greenwich Mean Time / 格林威治標準時間) 只要選好時區，網路攝影機就會自動調整系統的本機時間。

Server Name (伺服器名稱) 使用預設的 SNTP 伺服器 (例如：time.stdtime.gov.tw)。

Sync Server Time (同步化伺服器時間) 網路攝影機的時間會與網路時間同步。

FTP (影像上傳)

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” (網路設定) → “FTP” (影像上傳) 進入

“FTP” (影像上傳) 頁面。輸入詳細的 FTP 資訊，然後按 “Apply” (套用) 確認。在 "Trigger" (觸發) 功能表啟用 FTP 通知功能後，就會套用在此所設的資訊。

Page 72

AP MISCELLANEOUS CONTROL PANEL

-24-

MAIL (郵件管理)

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” (網路設定) → “MAIL” (郵件管理) 進

入 “MAIL” (郵件管理) 頁面。輸入詳細的電子郵件資訊，然後按 “Apply” (套用) 確認。在 "Trigger" (觸發) 功能表

啟用電子郵件通知功能後，就會套用在此所設的資訊。

功能說明

Server (伺服器) 輸入您從電子郵件系統供應商取得的 SMTP 伺服器位址。

Mail From (寄信人信箱) 輸入完整的電子郵件位址，以確保電子郵件不會被 SMTP 封鎖。

Verify Password (驗證密碼) 有些郵件伺服器需要驗證密碼。請輸入「帳號」和「密碼」。

Email Address (電子郵件位址) 新增指定收信方的電子郵件位址。

註：使用者最多可指定四名收信方來接收電子郵件通知。

Video (影像設定)

按 “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Video” (影像設定) 進入 “Video” (影像設定)

頁面。

項目說明

System Type (系統影像類型) 選擇連接的網路攝影機的系統類型。

MPEG 影像解析度：VGA (640 × 480) / QVGA (320 × 240)

影像品質：BEST / HIGH / NORMAL / LOW (最佳 / 高 / 一般 / 基本)

Stream Format (影像格式) 選擇網路傳輸的格式 (MPEG-4 / Motion JPEG)。

Frame Rate (Frame 速度) 可以在此調整每台攝影機的 Frame 速度，以符合網路頻寬。將速度設為最大 (FULL)，

或者設為其他速度：HALF (半速) / ONE THIRD (三分之一) / QUARTER (四分之一) /

ONE FIFTH (五分之一) / ONE TENTH (十分之一) / ONE FIFTEENTH (十五分之一)。

實際的 Frame 速度必須視實際網路連線而定，而且可能會低於指定速度。

Page 73

AP MISCELLANEOUS CONTROL PANEL

-25-

項目說明

Maximum Exposure Limits

(最大曝光時間)

您可以調整最大曝光時間來達到光線補償的目的。

曝光時間控制共有五種等級。最短的曝光時間為 LEVEL 0，最長的則為 LEVEL 5。此

設定會影響到影像品質。

Detection (位移偵測設定)

當監視畫面裡有任何動作發生時，就會觸發位移偵測功能。選擇要設定的頻道，然後按下 “Edit” (編輯) 按鈕進入位移偵測區域設定視窗。

功能說明

Motion Detection Setting Area

(位移偵測設定區域)

使用電腦滑鼠設定位移偵測區域。粉紅色格子代表未被偵測的區域，而透明的格子代表

有偵測的區域。您可以設定多個偵測區域。

Select All (選取全部) 按 “＋” (選取全部) 選取全區域進行偵測。

Clear All (全部清除) 按 “－” (全部清除) 清除先前選擇的偵測區域，變成全部不偵測。

Apply (套用) 設定後，按 “Apply” (套用) 確認。

5.5 Tools (工具)

按 “ ” (Miscellaneous Control) → “ ” (Tools) 進入 “Tools” (工具) 頁面。

註：您必須擁有 ”Supervisor” 的權限才能執行此功能。詳情請參閱第 17 頁的 “Account (權限管理)”。

更新韌體

在此頁面可以升級網路攝影機的韌體版本。

Page 74

AP MISCELLANEOUS CONTROL PANEL

-26-

功能說明

Update Server (更新伺服器)

選取網路攝影機的 IP 位址。確認選取網路攝影機的網路設定是否正確。

Current Version (目前版本)

在 “Firmware” (韌體) 下，您會看見目前的韌體版本。

例如：1022-1020-1001

Add (新增)

要升級網路攝影機的韌體版本，按 “Add” (新增) 尋找並選取韌體檔案。

升級檔案有很多。請逐一進行升級。

Update Firmware (更新韌體)

要開始升級網路攝影機韌體，按 “Update Firmware” (更新韌體) 開始進行升級程序。升級後會看見螢幕顯示一串訊息：

“Update Firmware Succeeded! Don’t plug off power, the machine will reboot automatically!” (韌體更新成功！請勿拔掉電源，本裝置會自動重新啟動！)

Configure Backup (設定備份) (僅限 DVR)

若在升級韌體版本之前想要先備份系統，請在 “Configure File” (設定檔案) 下選擇 “System Backup” (系統備份)、按一下 “…” 指定要儲存系統備份的位置，然後再按 “Backup” (備份) 開始進行備份。

註：攝影機的網路設定可能會在升級後回復為出廠預設值。如果網路設定回復為出廠預設值，請重新設定網路。

5.6 Status List (狀態清單)

按 “ ” (Status List) 可檢視所有的錄影清單和登入/登出事件清單 (All)，或者依日期搜尋要找的記錄或回放選取記錄的錄影檔 (Condition)。

記錄類型共有三種：Record (錄影)、Event (事件) 和 Backup (備份)。若要回放某筆錄影記錄的錄影資料，請選取該筆記錄，然後連按兩下開始回放影片。

詳細的回放操作資訊，請參閱第 30 頁的 “回放畫面”。

錄影清單

選擇 “All” (全部) 顯示所有的錄影記錄，或者 “Condition” (依條件) 來依日期或錄影類型來搜尋特定記錄。

‧ All (全部)

Page 75

AP MISCELLANEOUS CONTROL PANEL

-27-

按鈕說明

Query (查詢) 按此鈕可更新記錄清單。

Delete (刪除) /

Delete All (全部刪除)

按一下 “Delete” (刪除) 可刪除選取記錄，或者按 “Delete All” (全部刪除) 刪除目前顯示的記錄清單。

秘訣：若要一次選取多筆記錄，請按住鍵盤上的 [Ctrl] 鍵，然後點選您要刪除的記錄。

Play (播放) 按一下可回放選取的錄影記錄。之後會出現回放控制面板讓您操作。如需得知詳細的

回放操作資訊，請參閱第 30 頁的 “錯誤! 表格製作不正確。”。

Repair (修復) 按一下可修復有問題的記錄。

Apply (套用)

此按鈕僅在您於 “Record” (錄影) 標籤下勾選或取消勾選 “Reserve” (保留) 核取方塊時才能使用。

若要保留重要錄影記錄以供日後使用，請勾選 “Reserve” (保留) 核取方塊，然後按

“Apply” (套用)。選取的記錄會在有人無意或故意按到 “Delete” (刪除) 或 “Delete All” (全部刪除) 時被保留下來，不會被刪除。

Close (關閉)

按一下 “Close” (關閉) 可退出此視窗。

‧ Condition (

依條件

)

按鈕 / 功能

說明

From / To (開始 / 結束時間)

選擇內含您要搜尋之事件 / 錄影記錄的開始和結束時間。

Record Type (錄影類型) 此功能只在選取 “Record” (錄影) 標籤時方能使用。

選擇想要尋找的錄影類型：User (手動錄影) / Alarm (警報錄影) / Motion (位移偵測錄影)。

Query (查詢) 設好搜尋條件後，按一下可尋找指定記錄。搜尋結果會顯示在記錄清單中，依時間先後排列，

從最晚到最早。

Delete (刪除) / Delete All (全部刪除)

按一下 “Delete” (刪除) 可刪除選取記錄，或者按 “Delete All” (全部刪除) 刪除目前顯示的記錄清單。

秘訣：若要一次選取多筆記錄，請按住鍵盤上的 [Ctrl] 鍵，然後點選您要刪除的記錄。

Play (播放) 按一下可回放選取的錄影記錄。之後會出現回放控制面板讓您操作。如需得知詳細的回放操作

資訊，請參閱第 30 頁的 “錯誤! 表格製作不正確。”。

Repair (修復) 按一下可修復有問題的記錄。

Apply (套用)

此按鈕僅在您於 “Record” (錄影) 標籤下勾選或取消勾選 “Reserve” (保留) 核取方塊時才能使用。

若要保留重要錄影記錄以供日後使用，請勾選 “Reserve” (保留) 核取方塊，然後按 “Apply” (套用)。選取的記錄會在有人無意或故意按到 “Delete” (刪除) 或 “Delete All” (全部刪除) 時被保留下來，不會被刪除。

Close (關閉)

按一下 “Close” (關閉) 可退出此視窗。

Page 76

AP MISCELLANEOUS CONTROL PANEL

-28-

登入 / 登出事件清單

選擇 “All” (全部) 顯示所有的事件記錄 (Login / Logout)，或者 “Condition” (依條件) 來依日期來搜尋特定記錄。 ‧ All (全部)

‧ Condition (

依條件

)

備份清單 (限 DVR)

網路攝影機本身並不支援網路備份功能。當 Video Viewer 連線到 DVR 時，才可使用此功能。您可以遠端觀看備份清單並回放選取項目。

選擇 “All” (全部) 顯示所有的下載記錄，或者 “Condition” (依條件) 來依日期來搜尋特定記錄。

Page 77

AP MISCELLANEOUS CONTROL PANEL

-29-

‧ All (全部)

按鈕說明

Query (查詢) 按此鈕可更新記錄清單。

Delete (刪除) /

Delete All (全部刪

除)

按一下 “Delete” (刪除) 可刪除選取記錄，或者按 “Delete All” (全部刪除) 刪除目前顯示的記錄清單。

秘訣：若要一次選取多筆記錄，請按住鍵盤上的 [Ctrl] 鍵，然後點選您要刪除的記錄。

Play (播放) 按一下可回放選取的錄影記錄。之後會出現回放控制面板讓您操作。如需得知詳細的回

放操作資訊，請參閱第 30 頁的 “錯誤! 表格製作不正確。”。

Repair (修復) 按一下可修復有問題的記錄。

Apply (套用)

此按鈕僅在您於 “Record” (錄影) 標籤下勾選或取消勾選 “Reserve” (保留) 核取方塊時才能使用。

若要保留重要錄影記錄以供日後使用，請勾選 “Reserve” (保留) 核取方塊，然後按

“Apply” (套用)。選取的記錄會在有人無意或故意按到 “Delete” (刪除) 或 “Delete All” (全部刪除) 時被保留下來，不會被刪除。

Close (關閉)

按一下 “Close” (關閉) 可退出此視窗。

‧ Condition (

依條件

)

按鈕 / 功能

說明

From / To (開始 / 結束時間)

選擇內含您要搜尋之事件 / 錄影記錄的開始和結束時間。

Query (查詢) 設好搜尋條件後，按一下可尋找指定記錄。搜尋結果會顯示在記錄清單中，依時間先後排列，從

最晚到最早。

Delete (刪除) / Delete All (全部刪除)

按一下 “Delete” (刪除) 可刪除選取記錄，或者按 “Delete All” (全部刪除) 刪除目前顯示的記錄清單。

秘訣：若要一次選取多筆記錄，請按住鍵盤上的 [Ctrl] 鍵，然後點選您要刪除的記錄。

Play (播放) 按一下可回放選取的攝影機備份記錄。之後會出現回放控制面板讓您操作。如需回放的詳細資

訊，請參閱第 30 頁的 “錯誤! 表格製作不正確。”。

Repair (修復) 若備份檔有問題，按此鈕即可修復錯誤。

Apply (套用)

此按鈕僅在您於 “Backup” (備份) 標籤下勾選或取消勾選 “Reserve” (保留) 核取方塊時才能使用。

Close (關閉)

按一下 “Close” (關閉) 可退出此視窗。

Page 78

AP MISCELLANEOUS CONTROL PANEL

-30-

回放畫面

當您選取某筆記錄回放時，您會立即進入回放模式，而且會出現以下回放控制面板。

NO.

功能說明

回放 / 下載資訊顯示此區會顯示詳細的回放/ 下載資訊，例如：檔案名稱、錄影日期和時間，以及速度等等。

回放進度列此區會顯示回放進度列和目前回放的進度。

回放操作

此區僅在開始回放時方能使用。

(倒轉) / (快轉) / (停止) / (暫停) / (播放)

倒轉 / 快轉按一下可加快 2 倍倒轉 / 快轉、兩下為 4 倍、三下為 8 倍，四下則為 16 倍 (最快)。

De-Interlace (去交錯) 減低影片暫停時的畫面跳動現象。

Page 79

IE 網路瀏覽器

-31-

6. IE 網路瀏覽器

6.1 透過 IE 網路瀏覽器存取攝影機

您可以透過 IE 瀏覽器遠端觀看影像或操作網路攝影機。

註：支援的電腦作業系統 (O/S) 是 Windows 2000 與 Windows XP。

步驟 1：在 URL 網址列輸入網路攝影機使用的 IP 位址，例如 “http://ipcam.dyndns.org”，然後按 [Enter] 鍵。之後會提示您

輸入使用者名稱和密碼來登入網路攝影機。如果您設定的網路攝影機埠號並非 80 埠，就需要另行輸入埠號，格式為 “http://ip

位址:埠號

”。

以浮動 IP 網路類型為例：主機名稱 “ipcam.dyndns.org” / 埠號 “202”。則請在 URL 的網址列中，輸入 “http://ipcam.dyndns.org:202”，然後按 [Enter] 鍵。

步驟 2：輸入使用者名稱和密碼，即與 Video Viewer 登入時使用的使用者名稱和密碼相同，然後按 “OK” (確定)。若登入資

訊正確，您將會看到和以下類似的畫面。

6.2 IE 網路瀏覽器的工具列說明

NO.

功能說明

Main (主頁)

ActiveX / Quick Time 視您作業系統的網路瀏覽器的類型而定，請選擇 ActiveX 或 QuickTime。

TCP / UDP 選擇 Internet 傳輸協定：TCP / UDP。

BEST / HIGH / NORMAL / LOW

(最佳 / 高 / 一般 / 基本)

選擇影像品質：BEST / HIGH / NORMAL / LOW (最佳 / 高 / 一般 / 基本)

VGA / QVGA 選擇影像大小：VGA (640 × 480) / QVGA (320 × 240)。

Audio On / Audio Off

(聲音開 / 聲音關)

選擇開啟或關閉聲音功能：On 或 Off。 (聲音功能僅限 AVI202 和 AVI212 方能使用)

Network

(網路設定)

Static IP (靜態IP) / DHCP /

PPPOE / DDNS

在 “Network” (網路設定) 頁面，您可以設定網路攝影機的網路連線資訊。詳情請參閱第 19 頁的 Video Viewer “Network (網路設定)” 一節。

SNTP (網路對時)

SNTP (Simple Network Time Protocol / 網路對時) 頁面可用來設定時間。詳情請參閱第 1 頁的 Video Viewer “SNTP” 一節。

FTP (影像上傳)

指定一個 FTP 位址供位移偵測/警報通知功能使用。詳情請參閱第 23 頁的 Video Viewer “FTP (影像上傳)” 一節。

MAIL (郵件管理)

指定一個電子郵件信箱供位移偵測/警報通知功能使用。詳情請參閱第 24 頁的 Video Viewer “MAIL (郵件管理)” 一節。

Page 80

IE 網路瀏覽器

-32-

NO.

功能說明

Camera

(主機設定)

Snapshot Path (快照存放路徑) 設定快照圖片要儲存的位置。

Frame Rate (Frame 速度)

視頻寬來設定所需的 Frame 速度：FULL (全速) / HALF (半速) / ONE THIRD (三分之一) / QUARTER (四分之一) / ONE FIFTH ( 五分之一) / ONE TENTH ( 十分之一) / ONE FIFTEENTH (十五分之一)。詳情請參閱第 24 頁的 Video Viewer “Video (影像設定)” 一節。

System Type (系統影像類型) 設定連接的網路攝影機的系統類型 (NTSC / PAL)。

Stream Format (影像格式) 選擇網路傳輸的影像格式 (MPEG-4 / Motion JPEG)。

Maximum Exposure Limits

(最大曝光時間)

您可以調整最大曝光時間來達到光線補償的目的。詳情請參閱第24 頁的Video Viewer “Video (影像設定)” 一節。

Detection (偵測設定)

當監視畫面裡有任何動作發生時，就會觸發位移偵測功能。設定位移偵測區域。詳情請參閱第 25 頁的 Video Viewer “Detection (位移偵測設定)” 一節。

Motion Sensitivity Level

(偵測敏感度等級)

根據不同的情況來設定不同的位移偵測敏感度等級。詳情請參閱第 25 頁的 Video Viewer “Detection (位移偵測設定)” 一節。

Color Setting (顏色設定)

調整網路攝影機的亮度 / 對比度 / 色度 / 飽和度。詳情請參閱第 13 頁的 Video Viewer “5.1 顏色設定” 一節。

General

(一般設定)

Language (語言) 支援英文/中文介面切換。

Mac Address (MAC 位址)

顯示網路攝影機的 MAC 位址。

詳情請參閱第 16 頁的 Video Viewer “General (一般設定)” 一節。

Log (系統日誌)

在 “Log” (系統日誌) 頁面會看見網路攝影機的所有事件記錄，例如：“POWER ON” (開機 ) 、 ”REMOTE LOGIN” ( 遠端登入) 、 “RESET DEFAULT” ( 重新回復預設值)、”EMAIL”、”FTP”、”DDNS”、”PPPOE”、”DHCP” 和 “SNTP Update” (SNTP 網路對時) 等等。

詳情請參閱第 17 頁的 Video Viewer “Log (記錄)” 一節。

Account (權限管理)

新增 / 編輯 / 刪除存取網路攝影機的帳號、密碼、權限和登入時間。詳情請參閱第 17 頁的

Video Viewer “Account (權限管理)” 一節。

Trigger (觸發)

設定位移偵測觸發和/或警報觸發功能，例如 “Trigger Motion” (移動觸發)、“Trigger Alarm” (警報觸發) 和 “Trigger Duration” (警報持續時間)。設定移動觸發和/或警報觸發功能，例如：

“Method” (方法) 和 “Record Time” (錄影時間)。詳情請參閱第 18 頁的 Video Viewer “Trigger (觸發)” 一節。

Configure (系統組態)

顯示和升級網路攝影機的韌體版本。詳情請參閱第 25 頁的 Video Viewer “5.5 Tools (工具)” 一節。

快照

按一下可擷取目前畫面的快照。快照圖片會儲存在 “Camera” (主機設定) 功能表的

“Snapshot Path” (快照存放路徑) 中所指定的位置。

重新調整 QVGA

按一下可在即時畫面下放大 QVGA 檢視大小。

Page 81

QUICKTIME 播放程式

-33-

7. QUICKTIME 播放程式

您也可以使用 QuickTime 多媒體播放軟體來登入網路攝影機，並只能觀看即時畫面。

註：

QuickTime 是 Apple 公司的多媒體播放軟體。您必須先將 QuickTime 安裝到您的電腦，然後才能存取網路攝影機觀看即時畫面。

步驟1：進入Apple 的官方網站來下載 QuickTime。網站位址如下：

http://www.apple.com/quicktime/win.html a). 按一下 “DDoowwnnllooaadd” (下載) 進入下載頁面，然後選擇下載免費的播放軟體。 b). 輸入您的電子郵件地址，然後按 “FFrreeee DDoowwnnllooaadd NNooww” (免費下載) 來下載最新版的 QuickTime 多媒體播

放軟體。

c). 下載結束後，執行 “QQuuiicckkTTiimmeeIInnssttaalllleerr..eexxee” 檔，然後遵照螢幕上的指示完成安裝程序。

步驟2：開啟QuickTime 多媒體播放軟體。選擇 “File” (檔案) → “Open URL” (開啟 URL)，然後輸入 URL 位址。

URL 格式為 “rtsp://ipaddress/live/mpeg4” 例如：若 IP 位址為 “avtechipcam.dyndns.org”，埠號為 “201”，請在 URL 網址列輸入 “rtsp://avtechipcam.dyndns.org:201/live/mpeg4”。按一下 “OK” (確定) 繼續。

步驟3：之後會出現蹦現式視窗，提示您輸入授權資訊。輸入存取網路攝影機所需的使用者名稱和密碼。使用者名稱和

密碼就是您用來登入 Video Viewer 的使用者名稱和密碼。若輸入資訊正確，請按 “OK” (確定) 繼續。若輸入資訊錯誤，請按 “Cancel” (取消) 退出存取。

步驟4：若登入成功，您就會看見類似以下畫面的影像：

Page 82

附錄 1 預設值

-34-

附錄 1 預設值

‧ 預設值

項目預設值

‧ 預設網路值：

使用者名稱

admin

密碼

admin

埠號

IP 位址

192.168.1.10

Avtech AVI201, AVI202, AVI203, AVI212 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual