Avtech 67xb-a, 792c, H.264 Network DVR Quick Start Manual

k679b_677b_674b_675c_c551b_m759b_757b_751b_688b_686b_a791b_Quick_V1.2

H.264 Network DVR

Quick Start

GUI Display with USB Mouse Control

Please read instructions thoroughly before operation and retain it for future reference.

For the actual display & operation, please refer to your DVR in hand.

1

1. GUI DISPLAY WITH USB MOUSE CONTROL

1.1 Connect USB Mouse

Connect your USB mouse to one of the USB ports on the DVR front panel, and check if there’s a mouse icon ( )
on the screen, indicating the USB mouse is detected properly.

Move your mouse to enter the DVR password with the password keypad. The default administrator password is

0000. The status will be changed from (key lock) to (administrator), and the quick menu bar appears on
the left side of the screen.

Note: There are two user levels for DVR access which can be set in the main menu “SYSTEM”  “TOOLS”.

For details, please refer to your user manual.

Password Input Quick Menu: Close

1.2 Quick Menu Bar

Move to the arrow mark to extend the quick menu bar and show the five functions as follows:

Quick Menu: Open

Click to show the channel switch panel and select the channel you want.
For details, please refer to “3.2 Quick Menu Bar” in the user manual.

Click to display the playback control panel, and click to play the latest

recorded video clip, or click

to enter the search list.

Switch to the channel you want first, and click to enter the zoom-in
mode. In this mode, click and drag the red frame on the bottom left of the
screen to move to the place you want to see. To exit this mode, click 7.

Click to select the audio channel you want:
In the live mode, only the live audio channels can be selected.
In the playback mode, live and playback audio channels can be selected.

Click to enter the PTZ mode and show the PTZ camera control panel.

Click to show the power off panel to either halt or reboot the system.

1.3 Main Menu

Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.

Main Menu

QUICK START

Click to set the status display, image settings, and date &
time.

DATE SETUP Click to set the date display and daylight saving.

SYSTEM Click to set the system configurations.

EVENT INFORMATION Click to enter the event search menu.

ADVANCED CONFIG

Click to set CAMERA, DETECTION, ALERT,
NETWORK, DISPLAY, RECORD and DEVICES.

SCHEDULE SETTING Click to set record timer, detection timer, and alarm timer.

2

Main Menu Structure

QUICK START GENERAL CHANNEL TITLE
EVENT STATUS
DATE DISPLAY
MOUSE SENSITIVITY
PRIORITY (For Selected Model Only)
RECORD CONFIG
TIME SETUP DATE
TIME

DATE SETUP DATE INFO DISPLAY DATE OF MODE
FORMAT
DAYLIGHT DAYLIGHT SAVING

SYSTEM TOOLS LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
BACKUP CONFIG
RESTORE CONFIG
SYSTEM INFO BAUD RATE
HOST ID
R.E.T.R. (For Selected Models Only)
AUTO KEY LOCK
CLEAR HDD
RESET DEFAULT
REMOTE CONTROL ID
SERIAL TYPE
VIDEO FORMAT
VERSION
BACKUP DATA (USB)
BACKUP DATA (DVD) (For Selected Models Only)
BACKUP LOG (USB)

EVENT INFORMATION QUICK SEARCH
EVENT SEARCH
HDD INFO
EVENT LOG

ADVANCED CONFIG CAMERA BRIGHTNESS
CONTRAST
SATURATION
HUE
COV.
REC
CHANNEL TITLE
DETECTION LS
SS
TS
MOTION
ALARM
AREA
ALERT EXT. ALERT
INT. BUZZER
KEY BUZZER
VLOSS BUZZER
MOTION BUZZER
ALARM BUZZER
HDD BUZZER
ALARM DURATION (SEC)
HDD NEARLY FULL (GB)
NETWORK NETWORK
SNTP
FTP
E-MAIL
DDNS
ADVANCED CONFIG DISPLAY DE-INTERLACE (For Selected Models Only)
FULL SCREEN DURATION
QUAD SCREEN DURATION (For Selected Models Only)
DWELL SCREEN DURATION (For Selected Models Only)
DISPLAY COVERT
HDD DISPLAY MODE
VGA OUTPUT
ALPHA BLENDING
RECORD CONFIG
RECORD MANUAL RECORD
EVENT RECORD
TIMER RECORD
PRE-ALARM RECORD (For Selected Models Only)
OVERWRITE
EVENT RECORD ALL CH
KEEP DATA LIMIT (DAYS)
RECORD CONFIG
DEVICES (For Selected Models Only)

SCHEDULE SETTING RECORD
DETECTION
ALARM