AVSL Z44R User Manual

Z44R

Multi-purpose Rack Mixer

Item ref: 953.020

User Manual

 2 balanced microphone inputs
 Lo-cut rumble filters
 3-band EQ per Mic channel
 Switchable 48V phantom power
 2 x A/B selectable stereo line inputs
 2-band EQ per Line channel
 Foot-switchable DSP Reverb or ext. FX
 4 stereo zones with selectable line outs
 Emergency mute contacts
 Suitable for live vocalist PA
 Suitable for 4-zone installation
 Ideal karaoke add-on for DJ

Introduction

1. 48V phantom power LED indicator

2. MIC/LINE 1 LEVEL control

3. MIC/LINE 1 signal and peak LEDs

4. MIC/LINE 1 GAIN control

5. MIC/LINE 2 LEVEL control

6. MIC/LINE 2 signal and peak LEDs

7. MIC/LINE 2 GAIN control

8. LINE 3 LEVEL control

9. LINE 3 peak LED

10. LINE 4 LEVEL control

11. LINE 4 peak LED

12. REVERB TIME parameter control

13. OUT 1 level control & peak LED

14. OUT 2 level control & peak LED

15. OUT 3 level control & peak LED

16. OUT 4 level control & peak LED

17. MIC/LINE 1 combo input

18. MIC/LINE 1 low-cut rumble filter

19. MIC/LINE 1 FX level control

20. MIC/LINE 1 EQ sliders

21. MIC/LINE 2 low-cut rumble filter

22. MIC/LINE 2 FX level control

23. MIC/LINE 2 EQ sliders

24. LINE 3 source select switch

25. LINE 3 EQ sliders

26. LINE 4 source select switch

27. LINE 4 EQ sliders

28. REVERB DEPTH control

29. OUT 1 line selectors

30. OUT 2 line selectors

31. OUT 3 line selectors

32. OUT 4 line selectors

33. Power ON/OFF switch

Thank you for choosing the Adastra Z44R multi-purpose rack mixer. This product has been designed to offer a versatile and wide
range of functions to meet many different applications. In order to achieve the best results from this equipment and avoid damage
through misuse, please read and follow these instructions and retain for future reference.

Warning

To prevent the risk of fire or electric shock, do not expose any part of the unit to rain or moisture
If liquids are spilled on the surface, stop using immediately, allow unit to dry out and have checked by qualified personnel
Avoid impact, extreme pressure or heavy vibration to the unit
There are no user serviceable parts inside the mixer – refer all servicing to qualified service personnel

Safety

 Check that the supplied mains lead is in good condition and the supply voltage is correct.
 Ensure signal leads are of good condition without shorted connections (especially when using phantom power)
 Do not allow any foreign particles to enter the console through connectors or control apertures

Placement

 Keep out of direct sunlight, away from heat sources and damp or dusty environments
 When rack-mounting, avoid placing heavy units above the Z44R and ensure all connectors are accessible

Cleaning

 Use a soft cloth with a neutral detergent to clean the casing as required
 Use a soft brush to clear debris from the control surface
 Do not use strong solvents for cleaning the unit.

Front Panel

953.020UK User Manual