AVSL PHOTOELECTRIC SMOKE DETECTOR User Manual

Errors and omissions excepted.

Copyright© 2013. AVSL Group Ltd.

PHOTOELECTRIC SMOKE DETECTOR

Order ref: 350.125UN

User Manual

This unit detects initial smoke formation with its sensitive photoelectric system and signal processing
circuit giving an alarm signal as an early warning.

Operation:

1) Remove mounting plate from the back and insert the battery.

2) Press & hold the test button for a few seconds. When the alarm sounds release the button. The
alarm will sound 2 or 3 times to indicate it is in a working state.

3) Install the detector in a suitable place away from obstructions and with plenty of room for air flow,
eg; centre of a ceiling or roof.

4) When the battery needs replacing the alarm will sound approx. every 45 seconds

Please note:

• No user serviceable parts inside. The only replaceable part is the battery.

• Test the alarm weekly and every time the battery is replaced.

• Do not use in dusty and smoky environments.

• Keep out of reach of children.

• Any repairs should be carried out by qualified personnel.

• Please retain this manual for future reference.

Specification:
Battery 9Vdc (1 x PP3)
Alarm output 85dB/3m
Operation temperature -10°C - 40°C
Quiescent current 6-12µA
Dimensions 34 x 101mmØ
Weight 127g

07

1134

1134-CPD-032

EN14604

Photoelectric Smoke Alarm Device

350.125UN-001

Intended for Fire Safety and installed in buildings
Essential characteristic 1: Pass
Essential characteristic 2: Pass
Essential characteristic 3: Pass
Essential characteristic 4: Pass
Essential characteristic 5: Pass
Essential characteristic 6: Pass
Essential characteristic 7: Pass
Essential characteristic 8: Pass