AVSL PAV8 User Manual

PAV8
Portable PA unit
Item ref: 952.409UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
PAV8 portable PA unit
Neckband headset microphone
1 x VHF handheld microphone
Mains power adaptor
1 x VHF bodypack transmitter
IR Remote control for media player
2 x VHF antennas
User manual
Introduction
Thank you for choosing the PAV8 PA unit. This compact unit is provided with a comprehensive array of features to enable it to function in many different sound reinforcement and audio-visual applications. Please read the following to achieve the best results from your new PAV8 product.
Package Contents
Please check the contents to ensure that the product has been received in good condition. If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once.
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible replacement or returned demand.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock do not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
Prior to connecting mains, check the supply voltage is correct and the mains lead and adaptor is OK. Avoid ingress of water or particles into the enclosure or accessories. If the mains fuse blows, refer the unit to qualified service personnel If the VHF microphones are to be unused for a long period of time, remove the batteries and store for later use.
Placement
Keep the unit out of direct sunlight and away from heat sources. Place the unit in an upright position during use and storage. Keep the unit away from moisture or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. To avoid damage, do not use solvents to clean this equipment.
Rear Panel Main Controls
1
VHF A antenna connection
2
VHF A RF indicator
3
Main VOLUME control
4
BASS control
5
TREBLE control
6
ECHO control
7
DVD VOL control
8
AUX VOL control
9
MIC VOL control
10
VHF B RF indicator
11
VHF B antenna connection
12
AUX IN RCA connectors
13
AUX OUT RCA connectors
14
VIDEO OUT RCA connector
15
DC15V IN power inlet
16
MIC IN jack connector
17
FULL battery indicator
18
CHARGING indicator
19
POWER indicator
20
POWER on/off switch
Powering up
Your new PAV8 portable PA unit may arrive with you with the internal battery charged. Before connecting to the mains, switch POWER switch (20) on and see if the POWER indicator (19) lights. If not, you will need to charge the battery before using away from a mains supply.
Connect the PAV8 to mains supply using the supplied 15Vdc adaptor to the DC power inlet (15). When not in use but connected to the mains, if the POWER switch is in the OFF position, the internal battery will be re­charged from the mains supply. This can be observed by the CHARGING” LED (18) which lights when charging. When the battery has achieved full charge, the “FULL” LED (17) will light.
Please note: The internal battery may lose charge over long periods. If the PAV8 is not used for 2 months or longer, connect the supplied 15Vdc power adaptor to the mains to charge the battery.
Turn all rotary controls down except for BASS and TREBLE controls (4, 5), which should remain pointing vertically upwards (12-o-clock position). Turn the POWER switch on (the power LED should light). Turn up the leftmost VOLUME control (3) part way and insert a CD/DVD disc, USB pen drive or SD card into the player and press the PLAY button (see below for further operation instructions if necessary). Increase the “DVD VOL” control (7) whilst checking the output. The audio track should be heard through the PAV8 speaker. Adjust the volume, bass and treble controls as required.
Loading...
+ 5 hidden pages