Item ref: 153.303UK
MINI PARTY STROBE LIGHT
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or
moisture and avoid ingress of water into the enclosure. To prevent electric shock do
not remove the cover. No user serviceable parts inside. Refer servicing to qualified
service personnel.
Safety
Prior to connecting mains, ensure that the supply voltage is correct and the mains
lead is in good condition. If the mains fuse blows, refer the unit to qualified service
personnel.
Placement
This unit can be operated free-standing on a stable surface or suspended via the U
bracket.
Ensure adequate lead length to power supply and access to controls.
Keep away from heat sources or direct sunlight.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.
To avoid damage, do not use solvents to clean this equipment.
153.303UK User Manual
Layout
1.
Transparent cover
2.
Strobe tube
3.
Moulded housing
4.
U bracket
5.
Speed control (rear)
Operation
This mini party strobe light is supplied with 3 colour gel filters to offer the option of a
colour strobe effect. If any of these are required, attach the selected gel to the front
transparent cover. Without the gel, the strobe light will be white.
Position or mount the unit in the preferred manner and direct the transparent cover
toward the area where the strobe effect will be required. Adjust the angle by
loosening the screws at the side of the bracket.
Connect the mains lead to an appropriate socket, ensuring adequate lead length and
correct voltage. The strobe will immediately begin to flash.
Adjust the rate (speed) of flashing effect by turning the rotary knob on the rear of
the housing.
When not in use, disconnect the unit from the mains.
Specifications
Power supply
230Vac, 50Hz
Flash rate per second
0 - 10
Fuse rating
3A
Power consumption
7W
Dimensions
140 x 100 x 54mm
Weight
236g
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.
Loading...