AVSL LL6 User Manual

LED INTERLINK LIGHT EFFECT

OPERATING INSTRUCTIONS

LED Interlink light is a novelty lamp which includes different coloured
LED modules. Each LED module has a reflector and 49 LEDs. The
product has a chasing flashing function and also a sound response
sensor.

-FOR INDOOR USE ONLY!

-THIS PRODUCT IS NOT INTENDED FOR CHILDREN UNDER 10 YEARS
OF AGE.

-AVOID DIRECT EYE CONTACT WHEN THE PRODUCT IS TURNED ON.
LED’s ARE VERY BRIGHT AND MAY CAUSE INJURY TO YOUR EYES.

1.Contents of Packaging

-1 LED Interlink Light

-1 Power Adapter

-1 Instruction sheet

2.Special features

LED Interlink lights has 49 LED’s per module
Chasing flashing function
Sound response sensor and sensitivity adjustment

3.Attention

Read the operating guidelines before using the light.
The operating instructions are a product component. These contain important
advice on operating and handing the device.
Always keep the enclosed operating instructions for future reference!

4.Correct operation

This product may only be used indoors; all contact with damp moisture and
humidity should be avoided. Using the device other than as specified may
cause damage to the product, and is also linked to potential dangers such as
short-circuits, fire, or electric shock. Do not change, adapt or open the product
in any way!

5. Safety guidelines

The manufacturer will not be liable in the event that personal injury or
consequential damage results from failure to observe these safety guidelines
and the incorrect use of the device.

-Never attempt to open the device.

-Repairs should only be carried out by qualified repair personnel.

-Ensure that the device is ventilated. Never cover it during operation.

-Avoid subjecting the device to excess stress or strain.

-Do not expose the device to high temperatures, strong vibrations or high
levels of dampness or moisture.

-Only use the components included with the product in conjunction with the
device.

-Keep the device out of the reach of children and animals.

-The Interlink lights are only suitable for use indoors. Please protect the device
from damp and moisture.

-The device can be considered unsafe in the event that:

1. The lighting controls or power adaptor exhibits visible damage,

2. The device no longer functions,

3. The device has been placed under excess stress or strain during
transportation.

6. Operation

1. Connect the power adapter to the control unit.

2. Then, switch on the device using the “ON/OFF” switch.

3. You can now select the “SPEED” or “MUSIC” functions using the two
adjustable controls on the front of the control module.

4. To activate device’s chasing function, turn the “MUSIC” control to the left
(selecting the first possible setting). You can now use the “SPEED” control to
adjust the flashing speed.

5. The “Sound response” function is activated using the left control. The light
spots now react both to light sequence and sounds. You can adjust the
microphone’s sensitivity. Select the desired flashing speed using the “SPEED”
control and adjust the integrated microphone’s sensitivity level using the
“MUSIC” control. The light spots will now flash according to the intensity of the
sound near the unit.