AVSL HZ-3 User Manual

HZ-3

HAZE MACHINE

Order ref: 160.459UK

User Manual

VERSION 1.2

INTRODUCTION:

HZ-3 Haze Machine

A follow on from the highly successful HZ-2, the new HZ-3 haze machine features a
range of upgrades to ensure it remains the top haze machine in its class. A new
improved 700W heater ensures all fluid is vaporised quickly as well as decreasing the
warm up time. The new easy to operate LED digital display allows for stand-alone
operation as an alternative to the timer remote or 2 channel DMX operation. The 1.6l
tank is removable and easy to clean. There is a fluid level sensor which indicates
when the machine needs refilling so as not to damage the pump. This product has
been specifically developed for professional installations and high-end DJ
applications.

 2,400 CU Ft (68m³) per minute (approx.)
 Relay temperature controlled for constant temperature control and longer life
 Uniquely designed nozzle for reduced condensation build up in the pipes
 Easy to use digital display operation
 True constant haze output
 Variable output angle
 Low fluid indicator
 Removable fluid tank
 Timer output remote control included
 Easy to transport and portable
 2-channel DMX (output level and fan speed)

160.459UK User Manual

HZ-3 Haze Machine x 1pc

User’s Guide x 1pc

Power Cord x 1pc

Remote Control x 1pc

QTX Ref Code

Description

Size

Results

160.590UK

High quality professional
Haze fluid

1 Litre

High quality ultra
fine mist

160.591UK

5 Litre

PACKAGE CONTENTS:

Please check the contents to ensure that the product has been received in good
condition.

If you find any accessory is missing or the machine has arrived with any problems,
please contact your local dealer at once. Do not try to fix this item yourself or you
will lose the warranty. Please keep the original package and invoice for any possible
replacement or returned demand.

RECOMMENDED FLUID:

For the HZ-3 haze machine we strongly recommend the following fluid which has
been specifically formulated to perform best with any heater based haze machines.

160.459UK User Manual

SETUP:

1. Unpack the haze machine

2. Unscrew the top cap of the tank and remove to fill with the recommended

haze fluid

3. Replace the bottle and screw the cap securely ensuring the pipe is fed down to

the bottom of the bottle so a consistent flow of fluid is supplied to the machine

4. Connect the remote control

5. Connect the IEC mains plug and power up

6. Heat up time is usually between 2-3 minutes. Please ensure no button is

pressed during the heat up time. When the machine is ready the LED light on
the machine and remote control will illuminate

7. After heat up, please refer to page 8 “Operation for HZ-3”

CAUTION! TO PREVENT MORTAL ELECTRICAL RISK AND LONG LIFE OPERATION:

For your safety, please kindly pay attention to all of the warnings listed below:

 Always plug in the power plug last and disconnect from the mains when the

device is not in use or before cleaning

 Do not install and operate the device in rain or extreme heat, moisture or dusty

environments

 This device is for indoor use only and in a dry environment
 Do not switch on immediately but wait until it reaches to room temperature if

the device has been exposed to drastic temperature fluctuations

 Do not shake the device and avoid brute force when installing or operating
 Do not use the device during thunderstorms and please disconnect the power
 Do not use solvents or aggressive detergent to clean the device. Use a soft and

clean cloth

 Do not modify the device or the connected power cord without authorisation

160.459UK User Manual