AVSL GLOW MIRROR BALL MOTOR User Manual

Power: 12Vac / 500mA

GENERAL SAFETY RECOMMENDATIONS:

1) Installation must be done by a qualified person and need to

be installed in accordance with the European standard
EN60598-2-7

2) Before installation check the unit is in good condition. If

damaged do not plug the unit in to the mains. If the unit is
not functioning correctly return to your retailer and do not
attempt to repair yourself as there are no user serviceable
parts inside.

3) Use indoors only

4) Install with a distance of at least 0.5m from flammable

materials (decoration materials and others.

5) The installation must be done in such a way that it can

support 10 times the weight of the mirror ball for at least 1
hour without showing any distortion.

6) The motor needs to be installed perfectly horizontally.

Check the position with a spirit level.

7) Both the motor and the mirror ball must be installed out of

reach of persons

8) Ensure all screw holes are used

9) Use a chain with sufficient strength for the installation of

the mirror ball below the motor. Before connecting check
each link of the chain to ensure there are no breakages

10) Connect the assembly to an earthed wall outlet.

11) Check the unit regally to ensure it has incurred no damage

and is still in fully working order.

SPECIFICATIONS:

Mirror ball Ø: 30cm
Rotation Speed: 6rpm
Weight: 0.5kg

www.qtxlight.com