AVSL FL-50 User Manual

FL-50 Flanger Pedal

174.225UK

Functions

1. DEPTH – Adjusts the intensity of the flanging effect

2. RATE – Varies the modulation speed of the flanger

3. RES – Adjusts the resonance by re-feeding the flanger effect into itself, varying the focus of
the effect

4. Output – 6.3mm mono jack connector

5. D.C. In – DC jack for optional mains adapter

6. Input – 6.3mm mono jack connector

7. Indicator LED – Shows when effect is on (when it appears dim, replace battery)

8. Pedal Switch – Turns Effect On/Off

9. Battery housing – Compartment underneath for 9V battery

Notes on use

 Connecting to the Input jack enables the battery, please disconnect when not in use to

preserve the battery

 Before connecting to an instrument, ensure amplifier volume is turned down

Specifications

 Input Impedance: 470kΩ
 Output Impedance: 10kΩ
 Residual Noise: 90dBu (IHF A, Typ)
 Power Supply: 9Vdc (battery or optional mains adapter) 15mA

© chord 2009

www.chordmusicuk.com