AVSL DP4 User Manual

DP4

4-Channel DMX Dimmer Pack

Item ref: 154.110UK

User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introduction

1.

IEC power outlets (2 per channel)

2.

Channel fuses

3.

Power on/off switch

4.

Power inlet

5.

DMX input XLRM

6.

DMX output XLRF

7.

LED display

8.

MODE button (Chase or DMX)

9.

MENU button (select various Chase or DMX options)

10.

UP button (step up through options)

11.

DOWN button (step down through options)

The DP4 4-channel DMX dimmer pack has 4 channels each with 2 IEC power outputs per channel.
It has 16 built-in chase programs or can be controlled by 4 channels DMX.

Warning before use

 This item is for professional use only. Please take note of the following instructions before using this device.

• This product is not suitable for LED products

• This unit must be earthed.

• Do not turn on the power until all connections are securely made.

• Always disconnect from the mains before replacing any fuse

• There are no user serviceable parts inside

Fuses

The DP4 can carry maximum overall load of 10 amps. Each channel can also carry a maximum overall load of
10 amps but the unit is factory fitted with 2.5amps. These can be changed but the maximum overall load for
each channel should not exceed 10 amps and you must be professionally qualified in order to change the
fuses to suit.

Layout

154.110UK User Manual