Page 1
IR WEATHER-PROOF WDR CAMERA
PICO212WIR40
MANUAL
1. Mechanical filter exchange(TrueDay & Night),built-in WDR function.
2. Supreme Resolution(700 TV-Line)
3. This camera is incredibly flexible to install with its 3-axis camera
construction, which makes the camera ceiling, wall or slope
mountable.
4. This product is weather-proof to resist rain, snow and other weather
factors(IP66).
5. 120ft range visible in total darkness with 40pcs of IR LEDs.(Indoor)
6. Adopted DNR technology, It reduces noise efficiently in low light
condition.
7. Support 12 different privacy zone
8. Provide Max. 4x digital zoom
1. Please study the instruction manual before your applications and
keep it foryour future reference.
2. Do not flash LED light directly on the eyes when LEDs are on.
3. Do not install the camera on a unstable surface.
It will cause falling or other hazards.
4. Do not use improper power, it could cause fire or electric shock.
(Use the AC adaptor 12V DC regulated, 1A)
5. Do not disassemble or re-model the camera, it could cause fire,
electric shock or other hazards.
6. Stop using the camera when you find a malfunction like smoke or
unusual heat, it could cause fire or electric shock.
7. Due to the possibility of water leakage, do not cut or peel off the
cable. In case you cut or peel off the cable, the warranty will be
void.
CAUTION
FEATURE
4. Attach the sunvisor and fix the sunvisor fixing bolt.
5. Loosen the bolt by using the 3mm wrench included.
6. Face the direction of the camera to monitor.
7. Tighten the bolt to complete adjustment.
101.7
205.9
80.4
WRENCH
BOLT
BOLT
SUNVISOR
8. Please use thecamera unit within giventemperature andelectricitylimit.
9. Please make sure that installation shouldbe done by qualifiedservice
person only.
10. Donotdisassemblethe unitb yyourself. Whenthere isproblemw ith
theu nitplease contact after-sale service centeror the shopwhere
youbought.
1. Make a hole of Ø25mm in diameter for passing cable.
2. Drill four holes on thewallor ceiling and insert the anchors .
3. Arrange the cables and fix the screws.
If theproduct is to be put out of operation definitively,
take it to alocal recycling plant for a disposalwhich
is not harmful to the environment.
HOW TO INSTALL
ACCESSORIES
ANCHOR 6x30, 4EA
SCREW 4x35 TP1 PAN SUS, 4EA
WRENCH 3mm L TYPE, 1EA
SUNVISOR BOLT, 1EA
Extra video output cable forinstallation,
1EA(option)
Ø6
Ø25
WALL
ANCHOR 6x30, 4EA
SCREW Tp1 4x35, 4EA
DIMENSION
Page 2
SPECIFICATION
FUNCTION SETTING
1. How to use the jog lever
①ENTER :
② UP, ③ DOWN :
④LEFT, ⑤RIGHT :
⑥ FOCUS, ⑦ZOOM :
⑧EXT. VIDEO :
ㆍPush the lever : Used to access the
menu and confirm selection.
ㆍPushthe lever for one second : Used
to return to previous menu from the
motion detection setting section or
privacy mask settingsection.
Used to move the
cursor to up or down.
Used to move the
cursorto left or right and changethe
value.
Use a '+' type
driver for adjustingzoom and focus.
(In case of operation Focus/Zoom,
don't put stress excessively.)
Extra video output terminal for installation. Plug your
test monitorin here. The cable is option.
*OSD menu & Focus/Zoom
adjustment direction
1. Unfasten the screw of the
bottomdoor
2. Adjust the joglever& Focus
/Zoomtrimmers
3. Tighten the screw of the
bottom door
F
EXT.VIDEO
Z
7
6
8
2
5
1
3
4
3B25291A
※Allspecification is subjectto change without noticeto improvethe quality.
Model No.
Image Sensor
Effective Pixel
Resolution
TV Type
Sync. Type
ScanningSystem
Video Output
Gamma Characteristic
Min. Illumination
S/N Ratio
SDNR
Backlight
Day & Night
LED Output
Gain Control
Sense Up
Test Illumination
PowerSupply
CurrentConsumption
Lens
Operation Temp.
Preservation Temp.
Dimension
Weight
White Balance
Reverse Polarity Protection
PICO212WIR40
1/3" Sony Super HAD CCD II
976(H) x 540(V) Pixel
700 TV- Line
Progressive scan
1.0 Vp-p(Sync. Negative)Termination 75Ω±10%
γ
= 0.45(Selectable)
ATW /AWC / MANUAL(2,000 ~11,000 )
005 64 120ft
More 50dB(AGC OFF)
ON
WDR / BLC /OFF
True D&N(AUTO / COLOR /BW)
40
AUTO/ MANUAL
Max. X64(X2, X4,X8, X16,X32, 64)
Average testilluminance byfront view
Yes
Varifocal autoiris lens
14℉ ~ 122℉
-4℉ ~140℉
80.4(W)x 80.7(H) x101.7(D)mm
Approx.1.98 lbs
NTSC
Internal/ External
0. Lux(Senseup X ), 0Lux(LEDs ON, Max. )
IR LED pcs
X
Regulated 12VDC or 24V AC
Max. 600mA(at 12V DC,24V AC): LED ON
CUSTOM
INDOOR
WINDOW
OUTDOOR
LOW
NORMAL
MEDIUM
HIGH
OFF
ON
CUSTOM - -
LOW(24)
MEDIUM(30)
HIGH(36)
OFF
AUTO- -
MANUAL- -
OFF
CRR
CRR2
R/B- -
KELVIN- -
INPUTDELAY
(Sec)
25~ 45~ 100
MIN ~MAX
-8 ~ 0 ~8
OFF
HORIZ
VERT
BOTH
OFF
ON
Lens type selection
(Fixedi ris lens orVari-focal autoiris lens)
User setting value
For indoor
Maximizing WDRfunction
For outdoor
Althoughthe subject had a bright light behind
of it, you can see the subject clearly as well
as background
Determines that useBLC(Back Light Compensation)functionor not
AGC level selectable
(Custom- - Limit :60)
No use sense-up mode
Use sense-up mode automatically in low
illumination(Limit: 2X ~64X)
Sense-uplevel selectable between x2~ x64
Optimized mode fo rflicker(Ifuser choose CRR2
mode,AWC modeis notavailable on the White
Balancemenu)
Balancesthe color automaticallydependingon
thesource of light from 2,000 ~11,000
Move the camera lens toward to white paper
then press the enter button to find the optimal
whitebalancefor currentenvironment(User can
notuse this mode when Flickerlessis CRR2)
Adjustthe Redo rBlue values to shift the color
of the object
Adjustcolor temperature
The camera automatically detects lighting
conditionand selectsthe modeaccordingly
The pictureis always displayed inColor
The picture is always displayed in Black and
white
Change the GAMMAof the screen
(Default: 45)
Change the sharpness of the screen
(Default: Max)
Change the color gain ofthe screen
(Default: 0)
Normal image(No image inversion)
Set ahorizontal image inversion
Set avertical image inve rsion
Set horizontaland verticalimage inversion
Normal image(No Zoom)
Max 4x digital zoom available
PAN, TILT : Zoomed in image canbe movedto
horizontal and vertical
DC
MANUAL
PRESETS
WDR
BLC
AGC
SENSE-UP
FLICKERLESS
ATW
AWC
MANUAL
AUTO
COLOR
B/W
GAMMA
SHARPNESS
COLOR GAIN
FLIP
ZOOM
2.
OSD menu structure
OSD Menu Sel ect Menu SummarySub Menu
LENS SELECT
EXPOSURE…
WHITE
BALANCE
DAY&NIGHT
IMAGE
ADJUST…
*Preset mode for commonapplication tospeed up installation
Determines thatuse the SENSE-UP function ornot and
SENSE-UPlevel selectable
ㆍThe ' ' or '-- ' iconappeared with desired function, press the set button tomove submenu.
ㆍThe '-- -' iconappeared withfunction that isunavailable accordingto functionsetting.
No use motion detection function
Select motion detection area upto 4 area
- Adjustposition& sizeof motion detectionarea
- Pressthe enter buttonto move into the motion
areasetting section,wheneveryou press the
enterbutton,the mask coloris changed.
- Whenthe maskcolor is whiteyou canset the
position of mask by up, down, left and right
button.
- When the mask color is green and red you
canadjust thesize by4 buttons.
- Press the enter button for a few second to
escape.
No use privacy mask function
- Allowyou tomask certainareasof thescreen,
support12 privacyzone
- Press theset button to move into theprivacy
masksettingsection,wheneveryou pressthe
setbutton,the mask coloris changed.
- When the mask color iswhite(orblack orred)
youcan setthe positionof maskby up,down,
leftand rightbutton.
- When the mask color isblue, youcan adjust
thesize by4 buttons.
- Press the enter button for a few second to
escape.
Select mask color(White,Black, Red)
N/A
Displaythe cameraID on the screen
Change the camera ID
Select the positionto displaytheID onthescreen
InternalSync with 12V DCpower
ExternalSync with 24VAC power
(Dual power only)
Phase contollableat 24V AC input(L/L mode)
AREA SELECT
AREA 1~ 4
MASK 1~ 12
MASK COLOR
CAMERA #
ID DISPLAY
CAMERA ID
ID POSITION
V-PHASE
OFF
ON…
OFF
ON- -
RS-485
SETUP*
INT
L.L
CAMERA ID
SETUP
PRIVACY
MOTION
SYNC
FUNCTION
SETUP..
Loading...