AVS AIFM4040 Instruction Manual

INTERACTIVE FULL-MOTION WALL MOUNT

fits most flat panel TVs

Model: AIFM4040

Display Size: 42”-55”

Maximum Load: 12-21kg (26.4-46.2 lbs)

Mounting Pattern: 400 mm x 400 mm

Tilt Range: 5° up and 10° down

SPECIFICATIONS

INS TRU CTI ON MANUAL

Thank you for choosing the AVS AIFM4040. Before beginning installation, please
check all parts are included and undamaged. For any parts enquiries, please
contact AV Supply Group Ltd on [phone] or email to [e-mail]

PRODUCT CARE: Periodically clean your mount with a dry
cloth. Inspect all screws and hardware at regular intervals
to ensure that no connections have become loose over
time. Re-tighten as needed.

CAUTION: Do not use this product for any purpose not
explicitly specified by AVS. Improper installation may cause
property damage or personal injury. If you do not
understand these directions, or have doubts about the
safety of the installation, contact AVS Customer Service or
call a qualified contractor. AVS is not responsible for damage
or injury caused by incorrect mounting, assembly, or use.

WARNING! This product contains small items that could
be a choking hazard if swallowed. Keep these items away
from young children!

The desk must be capable of supporting the combined
weight of the mount and the display; if not, the structure

must be reinforced.

1

2

3

4

IMPORTANT SAFETY INSTRUCTIONS

5

Safety gear and proper tools must be used. Failure to do so
can result in injury or damage.

LIFESTYLE MONITOR MOUNTS

HARDWARE KIT

TOOLS REQUIRED

INSTALLATION

AV Supply Group (AVS) in

Step 1-A – Solid concrete mounting

Step 1-B – Wood Stud Mounting

tend to make this manual
accurate and complete. However, AVS makes no claim that
the information contained herein covers all details,
conditions, or variations. Nor does it provide for every
possible contingency in connection with the installation or
use of this product. The information contained in this
document is subject to change without notice or
obligation of any kind. AVS makes no representation of
warranty, expressed or implied, regarding the information
contained herein. AVS assumes no responsibility for
accuracy, complet

cy of the information

contained in this document.

Follow all instructions and recommendations regarding
adequate ventilation and suitable locations for mounting
your display. Consult the owner’s manual for your
particular display for more information.

6

7

(G) 6X6 Allen Key (x1)

(H) Wrench (x1)

(A) M5 x 25 Screw (x4)

(C) M6 x 25 Screw (x4)

(D) M8 x 25 Screw (x4)

(E) Spacer (x4)

(I) Bubble level (x1)

(J) Nut (x2)

(F) Washer M6 (x4)

(B1) Long bolt (x5)

(B2) Wall anchor (x5)

(B3) Washer M5 (x5)

Step 3 —Attaching the VESA plate to the monitor

Step 4 —Hang the TV onto the wall plate

If the LED hole pattern is larger than the TV Plate,
you are required to use the adaptors to install.

Step 2

Step 5

Step 6