Page 1
SPECIFICATION
HDMI Extender Over 2 x Cat5e/6/7
User Manual
Full 3D Pass-through
Support IR Control
30M Solution
Transmitter
Input Port
Output Port
Receiver
Input Port
Output Port
Bandwidth
Output Resolution
Operating Temperature
Deep Color
Chassis
Dimension
Weight
Power Supply
1 x HDMI (Female Connector)
1 x IR Channel, 2 x Cat5e/6/7
1 x IR Channel, 2 x Cat5e/6/7
1 x HDMI (Female Connector)
6.75Gbps
480i~1080P@50/60,1080P@24/50/60,
VGA~UXGA
-15℃~55℃/5°F~131°F
36bit
Metal
83mm(L)x46mm(W)x22mm(H)
210g
DC 5V
Danger Electric
Shock Risk
Keep Dry
Keep Away
from Heat
4.Stop using the unit during thunder or lightening storms.
5.Avoid the power cable being stepped on or pinched. Position the unit
carefully to avoid damage or accident.
6.Clean the unit only with dry cloth.
7.Only use accessories specified by the manufacturer.
8.Unplug the equipment when unused for a long period of time.
9.Do not try to open any non-serviceable parts. Contact your authorized
servicing center and personnel.
WARNING! This product contains small items that could be a choking
hazard if swallowed. Keep these items away from young children!
AV Supply Group (AVS) intend to make this manual accurate and complete.
However, AVS makes no claim that the information contained herein covers
all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice
or obligation of any kind. AVS makes no representation of warranty, expressed
or implied, regarding the information contained herein. AVS assumes no
responsibility for accuracy, completeness or sufficiency of the information
contained in this document.
Please read the following safety precautions carefully before you unpack
and install this equipment.
CAUTION: Do not use this product for any purpose not explicitly specified
by AVS. Improper installation may cause property damage or personal injury.
If you do not understand these directions, or have doubts about the safety of
the installation, contact AVS Customer Service or call a qualified contractor.
AVS is not responsible for damage or injury caused by incorrect mounting,
assembly, or use.
1.Do not expose the unit to rain, moisture or any other dripping liquids. And
keep it away from any wet locations such as fishing tanks, vases.
2.Do not install the unit close to fire or any other heat sources.
3.Keep the unit in dry and ventilated area. Do not install in bookcase,
cabinet or any other confined space.
SAFETY PRECAUTIONS
Page 2
PANEL DESCRIPTIONINTRODUCTION
•1 x HDMI Transmitter unit, 1x HDMI Receiver unit
•1 x 5V DC power supply
•1 x User Manual
•HDMI, HDCP 1.2 and DVI compliant
•Support full 3D pass-through
•Support high resolution up to 1080P
•Super IR control system, IR transport channel can be forward or backward
per your installation
•Extend to 30M over 2 x Cat5e/6/7
•Support CEC bypass
•External and internal EDID settings
FEATURES
PACKAGE CONTENTS
INSTALLATION
CONNECTION DIAGRAM
Transmitter Unit
Receiver Unit
If you are looking for a way to extend an HDMI signal, then this HDMI
Transmitter and Receiver is what you have been searching for. This HDMI
extender allows you to use two Cat.5e/6/7 cables to extend the HDTV display
up to 30M for 1080P without any signal loss. It is equipped with HDMI connector
and is capable of supporting DVI equipment when used with an HDMI to DVI
adaptor. And if that weren’t enough, you can use a remote to control your
device from over 30m away through an IR blaster and receiver pigtail.
It follows the standard of IEEE-568b, Cat.5e/6/7 cable can substitute HDMI
cable to achieve long distance transmission. It is designed for use in home
theater, professional A/V and personal computer switching applications.
•Connect HDMI input port on transmitter to the signal source equipment
such as DVD player.
•Connect the 2x CAT5e/6/7 output on the transmitter with 2 CAT5e/6/7
cables to the CAT5e/6/7 inputs on the receiver.
•Connect to the IR blaster cable (not included in the package) for IR signal
transmission. Place the IR blaster in direct line-of-sight of the equipment to
be controlled.
•Connect HDMI output port on receiver to HDMI displays.
•Connect to the IR receiver cable (not included in the package) for IR
signal reception. Make sure that the remote being used is in direct
line-of-sight of the IR receiver.
•Plug the 5VDC power supply into the receiver and connect the adaptor to
AC outlet.
1 HDMI INPUT
2 IR OUTPUT
3 CAT5E/6/7 OUTPUT
1 CAT5E/6/7 INPUT
2 IR INPUT
3 HDMI OUTPUT
4 POWER SUPPLY INPUT
1
HDMI Source IR Channel
Cat5e/6/7-1 Cat5e/6/7-2
DC 5V
Cat5e/6/7-1 Cat5e/6/7-2
2
3
4
1
3
HDMI LCD IR Channel
2
DC 5V
30 M Extension Over 2 x CAT5e/6/7
08：08
PLAY
HDMI Extender Over CAT 5E/6/7
TX
HDMI Source IR Channel
HDMI Extender Over CAT 5E/6/7
RX
Cat5e/6/7-1 Cat5e/6/7-2
HDMI Extender
HDMI Extension over Cat5e/6
S1
S2
RX
HDMI Extender
S2
S1
TX
HDMI Extension over Cat5e/6
Loading...