Page 1
Input Port
Output Port
Bandwidth
Output Resolution
Operating Temperature
Deep Color
Chassis
Dimension
Weight
Power Supply
SPECIFICATION
4x4 HDMI Matrix
User Manual
4xHDMI(Female connector), 1xIR Channel
4xHDMI(Female connector)
6.75Gbps
480i~1080P@50/60,1080P@24/50/60,
VGA~UXGA
-15℃~55℃/5°F~131°F
36bit
Metal
275mm(L)x150mm(W)x30mm(H)
1089g
DC 12V
Full 3D Pass-through
Support IR Control
Full HD 1080P
Danger Electric
Shock Risk
Keep Dry
Keep Away
from Heat
4.Stop using the unit during thunder or lightening storms.
5.Avoid the power cable being stepped on or pinched. Position the unit
carefully to avoid damage or accident.
6.Clean the unit only with dry cloth.
7.Only use accessories specified by the manufacturer.
8.Unplug the equipment when unused for a long period of time.
9.Do not try to open any non-serviceable parts. Contact your authorized
servicing center and personnel.
WARNING! This product contains small items that could be a choking
hazard if swallowed. Keep these items away from young children!
AV Supply Group (AVS) intend to make this manual accurate and complete.
However, AVS makes no claim that the information contained herein covers
all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice
or obligation of any kind. AVS makes no representation of warranty, expressed
or implied, regarding the information contained herein. AVS assumes no
responsibility for accuracy, completeness or sufficiency of the information
contained in this document.
Please read the following safety precautions carefully before you unpack
and install this equipment.
CAUTION: Do not use this product for any purpose not explicitly specified
by AVS. Improper installation may cause property damage or personal injury.
If you do not understand these directions, or have doubts about the safety of
the installation, contact AVS Customer Service or call a qualified contractor.
AVS is not responsible for damage or injury caused by incorrect mounting,
assembly, or use.
1.Do not expose the unit to rain, moisture or any other dripping liquids. And
keep it away from any wet locations such as fishing tanks, vases.
2.Do not install the unit close to fire or any other heat sources.
3.Keep the unit in dry and ventilated area. Do not install in bookcase,
cabinet or any other confined space.
SAFETY PRECAUTIONS
Page 2
PANEL DESCRIPTIONINTRODUCTION
•1 x HDMI Matrix unit
•1 x Remote
•1 x 12V DC power supply
•1 x User Manual
•HDMI, HDCP 1.2 and DVI compliant
•Support full 3D pass-through
•Support high resolution up to 1080P
•Super IR control system, IR transport channel can be forward or backward
per your installation
•Support CEC bypass
•External and internal EDID settings
FEATURES
PACKAGE CONTENTS
INSTALLATION
CONNECTION DIAGRAM
•Connect HDMI input ports to the signal source equipments such as
DVD player, Blue-ray player, Set-top box etc. You can press each of HDMI
INPUT SELECTION BUTTON repeatedly to choose the HDMI input source
you want to display. The LED will light up accordingly.
•Connect each HDMI output ports to the HDMI displays or monitors.
•You can control the device using a supplied Remote by pointing to the
built-in IR sensor.
•Plug the 12VDC power supply into the unit and connect the adaptor to
AC outlet.
IR Control:
•Connect to the IR EXT output with the IR extender cable (optional)
if you need to extend the distance of using the remote.
•Connect to IR EXT output port with the IR blaster cable (not included in the
package）for IR signal transmission. Place the IR blaster in direct line-of-sight
of the equipment to be controlled.
•Connect to the IR receiver cable (not included in the package) for IR signal
reception. An IR over HDMI adaptor is needed for connection. Make sure that
the remote being used is in direct line-of-sight of the IR receiver.
Front Panel
Rear Panel
1 HDMI INPUT LED AND SELECTION BUTTON
2 IR EXT OUTPUT
3 BUILT-IN IR
4 POWER LED
5 POWER SWITCH BUTTON
1 HDMI OUTPUT
2 HDMI INPUT
3 POWER SUPPLY INPUT
2 3 4
1
2
3
5
1
The 4x4 HDMI Matrix is designed to work as a switcher for multiple video sources
and displays. It is capable of switching HDMI signals between four sources and
four displays. Because it is a true matrix switch, any or all of the 4 inputs can
simultaneously be switched to any or all of the 4 outputs. This devise will support
high definition video in multiple resolutions of up to 1080P. This unit has quick
and easy installation. With IR Remote control option, you can enjoy easy and
comfortable operation via this unit. This Matrix is HDCP Compliant making it is
perfect for all HDMI devices, PC monitors, Plasma TV displays and HDTVs.
The Matrix offers solutions for HDTV, STB, DVD, home theater, projector
manufacture plant environments testing, data center, information distribution,
conference room presentation, school and corporate training environments,
AV installation etc.
Input1
HDMI Input
Input2Input3Input4Output1
HDMI Output
Output2Output3Output4
12V
O N
OFF
1 2 3
4
Select 1
HDMI Output 1
IRIR EXT Power
1 2 3
4
Select 2
HDMI Output 2
1 2 3
4
Select 3
HDMI Output 3
1 2 3
4
Select 4
HDMI Output 4
DC 12V
08：08
PLAY
06：08
PLAY
09：08
PLAY
07：08
PLAY
Input1
HDMI Input
Input2Input3Input4Output1
HDMI Output
Output2Output3Output4
12V
O N
OFF
12 3
4
Select 1
HDMI Output 1
IRIR EXT Power
12 3
4
Select 2
HDMI Output 2
12 3
4
Select 3
HDMI Output 3
12 3
4
Select 4
HDMI Output 4
1 1 1
Loading...