AVOCENT® LV 4000 SERIES
FEATURES
Plug and play
The LV4000 Series extenders
are delivered in a zero config
state so you can plug them in
and start working with them
straight away. There’s no need
for drivers or software to be
installed.
USB 2.0
Enables connection of any USB
human interface device from
mice and keyboards through to
graphics tablets, touchscreens,
jog shuttles, joysticks, 3D
explorers and mass storage
devices. Full speed (12Mbps)
isochronous devices such as
headsets are supported.
Analog audio
Stereo CD quality (stereo
channel 16 bit sampled at
44.1kHz) is available to transfer
audio from local to remote for
line out.
Digital video
Single or dual screens at
1920 x 1200 @ 60Hz maximum
resolution.
The LV4000 high performance KVM (Keyboard, Video and
Mouse) extenders enable you to locate your critical computing
hardware in a secure and temperature controlled environment,
away from the user work station environment, while maintaining
the same user experience.
The LV4000 Series can transmit a single or two single Link DVI video streams, USB 2.0
and analog audio over a single or multiple CATx cables. The LV4000 series has been
designed to provide industry-leading video clarity, compatibility and high rack densities.
Perfect digital video, real time control
The LV4000 Series extenders use an uncompressed system whereby every pixel of
every frame is sent without loss. HDMI video and audio can be extended with the
correct adapter cable, although HDCP and CEC are not supported.
50 meters over a single CATx cable
Video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up
to 50m (150ft) of extension. The second video head requires a separate CATx cable.
Power eiciency
The LV4000 Series extenders are designed to be highly power eicient and run with the
minimum of input. In fact, the transmitter unit is so energy eicient that it can be
powered solely from the host computer USB connections.
EDID management
The system has intelligent EDID management to allow the true characteristics of the
monitor to be passed back to the computer.
Rack options
Both transmitter and receiver
units can be used stand-alone or
up to 16.
1
AVOCENT® LV 4000 SERIES
Technical Specifications
Hardware compatibility All computers with DVI-D, USB and audio requirement dependent.
DVI-D Interface – digital only The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz per head.
USB 2.0 Low and Full speed Transparent USB 2.0 (Low and Full speed) that supports HID and mass storage devices to a maximum of 50 meters.
Audio The system delivers analog stereo audio (Line Out). 8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24 bits at
Computer connections Transmitter (TX) 1 or 2 x DVI-D, audio 3.5mm in, USB type B, 1 or 2 RJ45.
Computer connections Receiver (RX) 1 or 2 x DVI-D, audio 3.5mm out, USB type A x 4, 1 or 2 RJ45.
Operating temperature 0 to 40ºC / 32 to 104ºF.
Approvals CE, FCC, UL
Physical Design Compact case, robust metal construction in single and dual head models
Power Receiver
Important extension distance details Recommended cables are CAT7 shielded foiled twisted pairs: Daetwyler 7702 Flexible patch cable Daetwyler 7120 Bulk cable Category
Res (@60Hz) Cable Patches Distance 1920 x 1200 CAT7 @ 50m
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio).
Dimensions for Single Head Model
120mm / 4.7’’ (w) x 75mm / 3’’(d) x 26mm / 1’’ (h) 320g / 0.7 lb.
Dimensions for DUAL Head Model
120mm / 4.7’’ (w) x 75mm / 3’’(d) x 48mm / 2’’ (h) 500g / 1.1 lb.
2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter.
Transmitter
Powered from the desktop computer’s USB connections. Optional 2.5mm DC jack (power adapter not included).
5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio
frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
1920 x 1200 CAT6a @ 50m
1680 x 1200 CAT5e @ 50m
1920 x 1200 CAT7 @ 40m
Ordering Details
PART NUMBER DESCRIPTION
LV4010P LongView single DVI,USB,audio,CATx 50M
LV4020P LongView dual DVI,USB,audio,CATx 50M
PSC0006 Power Supply for LongView 3000/4000 unit
RMK-86 RMK-84 1 module mount plate
RMK-87 RMK-84 2 module mount plate
RMK-84 LV3000/4000 19in 2U chassis kit
VertivCo.com | Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA
© 2016 Vertiv C o. All rights reser ved. Vertiv and the Vert iv logo are tradema rks or registered tra demarks of Vertiv Co. A ll other names and lo gos referred to are tra de names, tradem arks or registered t rademarks of their re spective owner s. While every prec aution has been
taken to ensu re accuracy and com pleteness here in, Vertiv Co. assum es no responsib ility, and disclaims a ll liability, for dama ges resulting fro m use of this informatio n or for any errors or omi ssions. Speci fications are sub ject to change with out notice.
2AV-11416 (R07/16)