AVLink YX-3044, YX-3084 User Manual
User Manual
YX-3044 YX-3084
YX-3088
YX Series Matrix Switching Systems
YX Matrix Switching System—User Manual
1
Before You Use the System
1、Read manual——Carefully read the manual before you use the system.
2、Installation environment——The system should be installed indoor only. Install either on a
sturdy rack or desk in a well-ventilated place.
3、Lightning——Unplug the power cord during lightning or after a prolonged period of non-use
to avoid damage to the equipment.
4、Maintenance——Only qualified technical engineers or specified distributors are permitted to
repair or replace components and parts of the equipment upon failure.
YX Matrix Switching System—User Manual
2
Table of Contents
1.0 Matrix System Overview ..........................................................................................................4
1.0.1 YX Matrix System..........................................................................................................4
1.0.2 YX Matrix System Packing............................................................................................4
2.0 YX Matrix Host Installation......................................................................................................5
3.0 YX Matrix System Models........................................................................................................6
4.0 Matrix System Front/Rear Panels .............................................................................................6
4.0.1 YX-3044 Front/Rear Panels...........................................................................................6
4.0.2 YX-3084 Front/Rear Panels...........................................................................................7
4.0.3 YX-3088 Front/Rear Panels...........................................................................................7
5.0 YX Matrix and Peripherals Connection....................................................................................8
5.0.1 Input/Output Jacks..................................................................................................................8
5.0.1.1 Audio/Video Connecting Cable...........................................................................9
5.0.2 YX Matrix and Control Computer Connection............................................................10
5.0.3 Remote Control Methods and Settings.........................................................................11
5.0.3.1 RS-232 Communication Port, Connection Methods......................................... 11
5.0.3.2 RS-485 Communication Port............................................................................13
5.0.3.3 On/Off Switch Settings .....................................................................................13
5.0.3.4 YX Matrix System and Control System Connection........................................15
6.0 Matrix Control Panel Operation..............................................................................................17
6.0.1 Input/Output Switching Key Operation Mode.............................................................17
6.0.2 Front Panel Key Functions...........................................................................................17
6.0.3 Operation Examples.....................................................................................................18
7.0 Matrix Application Software...................................................................................................21
7.0.1 Software Introduction...................................................................................................21
7.0.1.1 Software Description.........................................................................................21
7.0.1.2 Software Activation...........................................................................................21
7.0.2 Software Features.........................................................................................................21
7.0.2.1 Main Operation Interface Functions .................................................................22
7.0.2.2 Disconnect Function Keys ................................................................................24
7.0.2.3 Select all output, DeSelect all output Switching Functions..............................25
7.0.2.4 Disconnect all Command..................................................................................25
7.0.2.5 Memory Function Usage...................................................................................25
7.0.2.6 Scan Function Usage.........................................................................................26
7.0.2.7 Options Function Usage....................................................................................26
7.0.2.8 Exit Function Usage..........................................................................................27
7.0.2.9 Other Usages.....................................................................................................27
8.0 Communication Protocol and Control Command Code .........................................................27
YX Matrix Switching System—User Manual
3
9.0 YX Matrix System Technical Parameters...............................................................................28
10.0 Common Problems and Solutions.........................................................................................29
YX Matrix Switching System—User Manual
4
1.0 Matrix System Overview
1.0.1 YX Matrix System
The YX Matrix switcher is a high performance switching equipment for audio/video frequencies.
It is used for multiple input/output cross
switching of audio/video signals. It provides independent YPbPr component and audio
input/output terminals. Each YPbPr component signal and audio signal is transmitted
separately and switched separately, thereby minimizing signal attenuation and ensuring high
definition graphics and high fidelity signal output.
The YX Series Matrix is used mainly in TV broadcasting projects, multi-media conference
halls, large display projects, TV teaching and command control centers. It boasts features of
power interruption protection during power surge, LCD display and synchronous and separate
audio/video switching functions. Its RS-232 and RS-485 communication ports enable convenient
communication with remote control equipment. This manual describes using of the YX-3088
model. Refer to the YX-3088 User Manual for using of other models of matrix systems.
Figure 1-1 YX-3088 Matrix
1.0.2 YX Matrix System Packing
YX Matrix Host
RS-232 Communication Connecting Cable
YX Matrix Switching System—User Manual
5
Power Cord
YX Matrix Testing and Applications Software CD
User Manual
2.0 YX Matrix Host Installation
The YX Series Matrix Host has a black metallic housing. It can be placed on a sturdy desk
or installed on a 19-in rack. See Figure 2-1 below:
Figure 2-1 Installing the YX Matrix Host on a Standard Rack
Green Terminal(M) Quantity
YX-3044 2 Pcs
YX-3084 2 Pcs
YX-3088 2 Pcs
YX Matrix Switching System—User Manual
6
3.0 YX Matrix System Models
The YX Series Matrix has following models to meet different requirements of different
users:
Technical
Parameters
Model
Video
Input
Port
Video
Output
Port
Audio
Input
Port
Audio
Output
Port
RS-485
Connec-
tor
RS-232
Connec-
tor
YX-3044 4 4 4 4 √ √
YX-3084 8 4 8 4 √ √
YX-3088 8 8 8 8 √ √
4.0 Matrix System Front/Rear Panels
4.0.1 YX-3044 Front/Rear Panels
Figure 4-1 YX-3044 Front Panel
Figure 4-2 YX-3044 Rear Panel
YX Matrix Switching System—User Manual
7
4.0.2 YX-3084 Front/Rear Panels
Figure 4-3 YX-3084 Front Panel
Figure 4-4 YX-3084 Rear Panel
4.0.3 YX-3088 Front/Rear Panels
Figure 4-5 YX-3088 Front Panel
YX Matrix Switching System—User Manual
8
Figure 4-6 YX-3088 Rear Panel
5.0 YX Matrix and Peripherals Connection
Figure 5-1 YX Matrix System Connection
5.0.1 Input/Output Jacks
Referring to the different matrix models, the video signal input/output jacks are formed by
the 4th and 8th rows RCA female connectors. The connectors from top to bottom are: Y, Pb/Cb,
Pr/Cr, Audio Signal Jack. The Y signal jack is green, the Pb/Cb signal jacks are blue, the Pr/Cr
signal jacks are red, and the upper row audio jacks are red (right audio channel) and the lower
row audio jacks are white (left audio channel). The output jack channels are numbered from left
YX Matrix Switching System—User Manual
9
to right as NO.1 to NO.8 (in five rows). Refer to the drawing on the housing for other types of
connectors.
Different models of YX matrix systems provide a different number of input/output
connectors where users can connect to different audio/video equipment including CD/DVD
players, graphics workstations, and number display. The output connectors can be connected to
projectors, video recorders, displays and multiplexers.
5.0.1.1 Audio/Video Connecting Cable
Different models of the YX matrix system provides a different number of input/output jacks
for users to connect to different audio/visual equipment including CD/DVD players, graphics
workstations, and number displays. The output terminals can be connected to projectors, video
recorders, displays and multiplexers and so on. The YX matrix supports various AV video signal
sources.
The RCA connecting terminal----audio/video port: The 4-hole RCA Jack is a conventional
audio connector. Its installa tion hole measures 14x18mm.
YPbPr Connector—Standard Video Input (3-RCA) Connector:
Type: Video connectors are in pairs (Y, Pb, Pr) (Green Y, Blue Pb, Red Pr)
For YX matrix YPbPr RCA jack connection, see Figure 6-2 below:
Figure 6-2 YPbPr-RCA Connecting Cables
RCA, an abbreviation for lotus socket, is a DVD component (YpbPr) socket.
The YpbPr connector is a high definition digital TV connector (color contour YpbPr)
capable of connecting with high definition digital set-top box, satellite receiver and various high
definition monitors and TV equipment.
Color difference output (YPbPr) connector separates the modulated Y, PB and PR signals. It
separates the colorimetry C signal into blue b-Y color difference and red r-Y color difference and
uses 3 cables for separate transmission to improve display resolution. This way, it ensures the
largest bandwidth of colorimetry and averts interference to the signals because the signals are
transmitted by 3 separate cables and each cable is being properly sleeved.
The Audio Connecting Cable:
Type: The audio connecting cables are in pair for left and right channels (R for red and L
for left).
Connection of the RCA connector of the YX matrix audio is as shown in Figure 6-3
below:
Loading...