Avlink YVS-714A User Manual

AUDIO/VIDEO
Distribution
Amplifier

(YVS-714A)

USER MANUAL V1.0

YVS-714A

Package Contents-

 1 AVLINK YVS-714A Audio/Video Distribution

Amplifier

 1 user manual
 1 power adapter DC 12V 600mA
 1 1.2m component (Video) Cable
 1 1.2m Audio R/L Cable
 2 rack rails, 8 screws

If anything is missing, please contact with your vendor.

Introduction

Through the YVS-714A Audio/Video Distribution Amplifier,
you can use one DVD player to display an identical image
on 4 projectors or HDTV’s.

YVS-714A Audio/Video Distribution Amplifier is ideal for:

 Test bench facilities
 Data Center
 Help desks
 Video broadcasting:

Presentation
Stock quotes
Timetables
Educational facilities

Features

 Bandwidth 400MHz (-3db).
 Compliant with the component RCA Video.
 Supports 480p, 576i, 576p, 720p, 1080i.
 Video input impedance: 75Ω
 Compliant with the RCA Audio.
 Audio input impedance: 10KΩ
 Supports digital optical audio
 Audio Frequency Response 20Hz~20KHz.
 Extends the signal up to 15 meter.
 Can be cascaded.
 1U rack design.

Specifications

Function YVS-714A

Video Input 1 Set RCA Connector

Video Output 4 Set RCA Connector

Audio Input

Audio Output

Cable Distance

(Device to Monitor)

Power Adapter (Min.) DC 12V 600mA

Housing Metal

Weight 1095g

Dimensions (LxWxH) 269x106x46mm

1 Set(R,L) RCA Connector

1 Digital Optical TOSlink

4 Set(R,L) RCA Connector

4 Digital Optical TOSlink

15m (Max.)

-1-

FRONT VIEW

1. Power LED

REAR VIEW

1. Input Power Jack

2. Video Input

3. Stereo Unbalanced Audio Input

4. Digital Optical Audio Input

5. Video Output

6. Stereo Unbalanced Audio Output

7. Digital Optical Audio Output

Installation

1. Turn off the DVD player and monitors

2. Connect the Video male extension cable between the
DVD player and the YVS-714A“Video In” port of the
Distribution Amplifier.

3. Connect YVS-714A audio input connector with the audio
cable from DVD player.

4. Connect the Video male extension cables between the
HDTV’s and the YVS-714A“Video Out” ports of
Distribution Amplifier.

5. Connect YVS-714A audio output connector with the
audio cable from the audio amplifier

6. Connect the power adapter on each side.

7. Turn on the DVD player and HDTV’s and the audio
amplifier.

-2-

Operation for cascade:

1. To display identical images on more monitors, you have
to attach another Distribution Amplifier.

2. Connect the Audio/Video male/female extension cable
between the former Distribution Amplifier of the “Audio/
Video out 1” port and the latter Distribution Amplifier of
the “Audio/Video In” port.

Note:

Even though you are allowed to cascade the Distribution
Amplifier with several ports, the image might become
unstable if one cascades too many tiers to the Distribution
Amplifier.

OPTICAL

RL RL RL RL RL

INPUT

OPTICAL OPTICALOPTICAL OPTIC AL

YPBPR

PR PB Y YPBPRPR PB Y PR PB Y

OPTICAL

PR PB Y

INPUT OUTPUT2OUTPUT1 OUTPUT3 OUTPUT4

OUTPUT4OUTPUT3OUTPUT1 OUTPUT2

OPTICALOPTICAL OPTICALOP TICAL

LRLRLRLRLR

YPBPRYPBPR PR PB YYPBPR

P.S.: The example cascades the 4 ports Distribution
Amplifier; however, you can cascade the Audio/Video
Distribution Amplifier with the required ports.

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to, in this manual are the trademarks or
registered trademarks belonging to their respective
companies.

-3-