Avlink YVR-101A User Manual

YPbPr to VGA
With Audio
Selector Box

Introduction

The YVR-101A is video/audio selector, 1 port HD-15
VGA / 3.5Ø stereo connectors or 1 set YPbPr RCA
connector / 1 set RL audio RCA connectors input signal,
and output to HD-15 VGA / 3.5Ø stereo connector.

Features

 Resolution up to 2048x1536.
 Support 480i, 480p, 576i, 576p, 720p formats.
 Audio output: support multimedia speakers and

headphone.

 480i / 576i formats with Macrovision are not

supported.

FRONT VIEW

1. YPbPr / RL “Input” Port

2. “Input” Port Selection Switches (YPbPr or VGA)

3. Power LED

Rear View

(YVR-101A)

USER MANUAL V1.1

YVR-101A

Package Contents -

 1 AVLINK YVR-101A Selector Box
 1 user manual
 1 power adapter DC 9V 600mA

Any thing missed, please contact with your vendor.

Specification

Function YVR-101A

Video In Connectors

Video Out Connector 1 HD-15 Female

Audio In Connectors

Audio Out Connector 1 3.5Ø Stereo Jack

Cable Distance

(Single end)

YPbPr Bandwidth -3dB@70MHz

VGA Bandwidth -3dB@400MHz

Power Adapt er (Min.) DC 9V 600mA

Housing Metal

Weight 225 g

Dimensions (LxWxH) 130x85x29.5 mm

Note:

Note that although 480i/576i component video is
supported by the YVR-101A, most PC Display Monitors
cannot handle such line rates. Typically, only 480p, 576p,
720p are within the displayable line rate range of LCD
and CRT monitors. Furthermore the scaler in LCD
monitor tems must include a de-interlacer for it to display
interlaced video such as with 480i/576i.

1 Set YPbPr RCA Female

1 HD-15 Female

1 Set RL RCA Female

1 3.5Ø Stereo Ja ck

65m (Max.)

-1-

1. Audio In

2. VGA In

3. Audio Out

4. VGA Out

5. Input Power Jack

Installation

1. Turn off the DVD player, Set Top Box or PC and
monitor or projector.

2. Connect the Set YPbPr RCA Connectors extension
cable between the DVD player or Set Top Box and the
“YPbPr In” port of YVR-101A.

3. Connect the VGA male extensi on cable between the
PC and the “VGA In” port of YVR-101A.

4. Connect the Set RL RCA Connectors extension cable
between the DVD player or Set Top Box and the “RL
In” port of YVR-101A.

5. Connect the 3.5Ø Stereo plug extension cable
between the PC and the “Audio In” port of YVR-101A.

6. VGA Out connect the monitor or projector.

7. Audio Out connect the multimedia speakers or
headphone.

8. Connect the power adapter with the YVR-101A.

9. Turn on the DVD player, Set Top Box or PC and
monitor or projector.

-2-

Operation

1.“Input” Port Selection

The “Input” Port of this switch are as following:

1. When the switch push “Up” it is for YPbPr / RL.

2. When the switch push “Down” is for VGA / Audio.

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.

-3-