Avlink YV-101A User Manual

YPbPr to VGA
With Audio
Conversion Box

(YV-101A)

USER MANUAL V1.1

YV-101A

Package Contents-

 1 AV LINK YV-101A
 1 user manual
 1 power adapter DC 9V/600mA

Any thing missed, please contact with your vendor.

Introduction

The YV-101A connects your component video source
(DVD player or Set Top Box) to your VGA monitor and
projector, which support 480i, 480p, 576i, 576p, 720
formats.

Features

 Support 480i, 480p, 576i, 576p, 720p formats.
 Progressive DVD player or Set Top Box on VGA

monitor and projector .

 Audio output: support multimedia speakers and

headphone.

 480i / 576i formats with Macrovision are not supported.

Specifications

Function YV-101A

Video In Connectors

(RCA Female)

Video Out Connector

(VGA Female)

Audio In Connectors

(RCA Female)

Audio Out Connector

(3.5Ø Stereo Jack)

Support formats

Cable Distance

(Single end)

Video Bandwidth -3dB@70MHz

Video RGB Output 0.7Vp-p,75Ohm

Power Adapt er (Min.) DC 9V 600mA

Housing Metal

Weight 150g

Dimensions (LxWxH) 67x57.5x38 mm

Note:

Note that although the 480i/576i component video is
supported by the YV-101A, most PC display monitor
cannot handle such line rates. Typically, only 480p, 576p,
720p are within the displayable line rate range of a LCD
and a CRT monitor. Furthermore the scaler in the LCD
monitor tems must include a de-interlacer for it to display
interlaced video, such as with 480i/576i.

480i, 480p, 576i, 576p,

-1-

3
1
2
1

720p

65m (Max.)

FRONT VIEW

1. “Input” Port

2. Power LED

REAR VIEW

1. Input Power Jack

2. Audio Out

3. Video Out

Installation

1. Turn off the DVD player or Set Top Box and monitor or
projector.

2. Connect the YPbPr extension cable between the DVD
player or Set Top Box and the “Input” port of YV-101A.

3. Connect the VGA male extensi on cable between the
monitor or projector and the Video Out of YV-101A.

4. Connect the DVD player or Set Top Box and the Audio
Out R/L to the YV-101A “Input” port.

5. Audio Out connects the multimedia speakers or
headphone.

6. Connect the power adapter with the YV-101A.

7. Turn on the analog monitor or projector.

-2-

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.

-3-