Avlink YH-01 User Manual

YPbPr to HDMI
Conversion Box

(YH-01)

USER MANUAL V1.0

YH-01

Package Contents-

 1 YH-01
 1 user manual
 1 power adapter DC 5V
 1 1.2m component (Video) Cable
 1 1.2m Audio R/L Cable

Any thing missed, please contact with your vendor.

Introduction

The YH-01 Component Video (YPbPr) to HDMI
Converter transforms HD component video (YPbPr) and
Audio (R/L) signal to HDMI output. The converter
changes your input analog signal to digital graphic
signal, so that digital display device or projector can be
connected to your analog output easily and conveniently
by HDMI.

Features

 Use PanelLink digital technology.
 Compliant with the specification of HDMI 1.3.
 Support 480i, 480p, 576i, 576p, 720p, 1080i, 1080p.
 Support Audio Sample rate 96KHz.

Specifications

Function YH-01

Video Input Connector

(Female)

Audio Input Connector

(Female)

Video Output Connector

(HDMI Female)

Max. Resolution 1080p

Cable Distance

(Single end)

Input Signal Type Standa rd YPbPr Signal

Output Signal Type Standa rd HDMI Signal

Power Adapter (Min.) DC 5V

Housing Plastic

Weight 130g

Dimensions (LxWxH) 95*91*31mm

Note:

Different cable qualify might effect upon the maximum
resolution and cable distance.

1 Set RCA(YPbPr)

1 Set RCA(R/L)

1

10 m (Max.)

-1-

Technical Specifications
Input/Output Signal

Pin # Signal Pin # Signal

TMDS Data 2+

1

TMDS Data 2 Shield

2

TMDS Data 2-

3

TMDS Data 1+

4

TMDS Data 1 Shield

5

TMDS Data 1-

6

TMDS Data 0+

7

TMDS Data 0 Shield

8

TMDS Data 0-

9

TMDS Clock+

10

TMDS Clock Shield

11

TMDS Clock -

12

CEC

13

Reserved

14

(N.C. on device)
SCL

15

SDA

16

DDC/CEC Ground

17

+5 Power

18

Hot Plug Detect

19

FRONT VIEW

1. “YPbPr In” Port

2. “Audio In” Port

-2-

REAR VIEW

1. Vertical position adjust
Adjust switch when screen position is right or left
slant.

2. Horizontal position adjust
Adjust switch when screen position is lower or upper.

3. Sharpness adjust
Adjust switch “SHARP” To correct flickering text or
line.

4. “HDMI Out” Port

5. Input Power Jack

TOP VIEW

1. Power LED

-3-

Installation

1. Connect the YH-01 video/audio input RCA connector
with RCA Video/audio male to male cable from different
audio/video equipment.

2. Connect the HDMI Female extension cable between the
monitor and the “HDMI Out” port of YH-01.

3. Connect the power cord and turn on the YH-01.

4. Turn on the DVD and digital monitor or p roje cto r.

Support VGA mode

Analog Resolution Frequency(Hz)

480i(NTSC) 1440x480 59

480p 720x480 59

576i(PAL) 1440x576 50

576p 720x576 50
720p 1280x720 50 / 60

1080i 1920x1080 50 / 60

1080p 1920x1080 50/ 60

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.

-4-