AVLink WVH-EPL, WVH-EPR User Manual

Download

Page 1

HDMI/VGA Extender

WVH-EPL

WVH-EPR

USER MANUAL V1.0

WVH-EPX

Package Contents-

 1x WVH-EPL and WVH-EPR Unit  1 user manual  1x Power adapter DC 48V (With 1x2 Pole Captive

Screw Socket)

 4x screws  2x Female 1x3 Pole Captive Screw Socket  1x IR receiver cable

 1x IR blaster cable (Peak Wavelength 940nm)

Anything missed, please contact with your vendor.

Features

 HDBaseT™ delivers Ultra HD (4K2K@30Hz with

YCbCr 4:4:4 and 4K2K@60Hz with YCbCr 4:2:0)

 Fully compliant with HDMI 1.4, and compatible with

HDMI 2.0 (4K2K 60Hz with 4:2:0 coding)

 Supports all standard formats of audio, such as Dolby

Digital, DTS, Dolby TrueHD, DTS HD-Master Audio and more.

 VGA IN supports up to 1080P@60 (12bits)  Supports Power over Cable  HDCP 1.x,2.2 compliant.  All frequency of IR receiver and emitter (bi-direction).  RS-232 for upgrade firmware  Use CAT.5/5e/6 cable to install easily.

Specifications

Function

WVH-EPL WVH-EPR

HDMI Input Connector

(A-Type Female)

NONE

HDMI Output Connector

NONE

(A-Type Female)

VGA Input Connector 1 NONE

Source select

(HDMI/VGA)

LED SW X1 (BLU/YEL)

LINK RJ-45 Connector x 1

IR IN 3.5ψ Stereo Jack x 1 355g

IR OUT 3.5ψ Stereo Jack x 1

Audio In

3.5ψ Stereo Jack x 1

NONE

Max. Resolution

4KX2K@60 4:2:0 (HDMI IN),

1080P@60 12bits(VGA IN)

Power Adapter (Min.)

DC 48V 0.28A

(1x2 Pole Captive

Screw Socket)

NONE

Cable Distance Cat.6@100 meters (Max.)

RS-232 Connector 1X3 Pole Captive Screw Socket x 1

Housing Metal

Weight 265g 260g

Dimensions (LxWxH) 107x92x45mm 107x92x39mm

-1-

FRONT VIEW

WVH-EPL

1. Source select (HDMI/VGA)

2. 1x HDMI Input Connector (A-Type Female)

3. IR Input

4. IR Output

5. VGA Input Connector

6. Audio Input

WVH-EPR

1. 1x HDMI Output Connector (A-Type Female)

2. IR Input

3. IR Output

-2-

Page 2

REAR VIEW

WVH-EPL

1. RS-232 Connector (1X3 Pole Captive Screw Socket)

2. DC 48V (1x2 Pole Captive Screw Socket)

3. Link (RJ-45 Connector)

WVH-EPR

1. RS-232 Connector (1X3 Pole Captive Screw Socket)

2. Link (RJ-45 Connector)

Installation

1. Turn off the HDMI source and HDMI display.

2. Connect the HDMI/VGA cable between the HDMI/VGA source and the “HDMI/VGA IN” port of WVH-EPL.

3. Connect the HDMI cable between the HDMI display and the “HDMI OUT” port of WVH-EPR.

4. Connect the CAT.5/5e/6 cables between the WVH-EPL “LINK” port and the WVH-EPR “LINK” port of extender.

5. Connect the power cord of WVH-EPL.

5. Turn on the HDMI/VGA source and display.

-3-

IR Receiver Cable Directions:

Put it into the WVH-EPL/R “IR IN” port and place the IR Receiver Cable, so that you can point to it easily with your IR remote controller.

IR Blaster Cable Directions:

Plug IR blaster cable plug into WVH-EPL/R “IR OUT” port, It sits in front of the DVD receiver’s IR sensor, which is located on the front-panel.

Technical Specifications Output Signal

Pin # Signal

TMDS Data 2+

TMDS Clock Shield

TMDS Data 2 Shield

TMDS Clock -

TMDS Data 2-

CEC

TMDS Data 1+

Reserved (N.C. on device)

TMDS Data 1 Shield

SCL

TMDS Data 1-

SDA

TMDS Data 0+

DDC/CEC Ground

TMDS Data 0 Shield

+5 Power

TMDS Data 0-

Hot Plug Detect

TMDS Clock+

-4-

Wiring Information & Coding

Conductor

Identification

RJ-45 Pin

Assignment

Color Code for

Conductor

Pair 1

White-Blue

Blue

Pair 2

White-Orange

Orange

Pair 3

White-Green

Green

Pair 4

White-Brown

Brown

TxGRx (only upgrade firmware):

Use the transmission line with RS-232 to connect the PC for upgrade firmware(local and remote).

Rx /G /Tx: Rx: Receive RS232-level signal pin. (data in) G: GND Tx: Transmit RS232-level signal pin. (data out)

-5-

Page 3

Power Connector:

OUTPUT LED:

FW: When blinking, this LED indicates that the unit’s

firmware has been loaded, and that the system is operating normally.

LINK: When lit, this LED indicates that an HDBaseT connection has been established between the TX and the RX boards over the CATx cable.

Note

However sometimes, especially in demonstrations or in a lab environment, the cable is rolled randomly in small turns for convenience. The randomly rolled UTP cable suffers additional signal impairments (compared to a straight cable) and therefore the maximal operating reach might be reduced. Rolling a CAT5E cable around a 70cm fixed diameter plastic drum has just a minor effect on the FEXT (Far End Cross Talk) when compared to a fully stretched cable.

-6-

Trademarks:

All the companies, brand names, and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companies.

-7-