Avlink VS-918UF User Manual

Video
Distribution
Amplifier

(VS-914UF)

1 In 4 Out

(VS-918UF)

1 In 8 Out

USER MANUAL V1.0

VS-914UF / VS-918UF

Package Contents-

 1 AVLink VS-914UF or VS-918UF Video

Distribution Amplifier

 1 user manual
 1 power adapter DC 12V 600mA
 2 rack rails, 6 screws

Any thing missed, please contact with your vendor.

Introduction

Through the Video Distribution Amplifier VS-914UF,
VS-918UF, you can use one PC to display identical
image on 4,8 monitors or even more.

Video Distribution Amplifier is ideal for:

 Test bench facilities
 Data Center
 Help desk
 Video broadcasting:

Presentation
Stock quotes
Timetables
Educational facilities

Features

 Bandwidth 500 MHz (-3db).
 Extends the video signal up to 65 meter (213 feet).
 Support the DDC, DDC2, DDC2B. (For video out port

1)

 Can be cascaded.
 The output is compatible with standard VGA card.
 1U 1/2 rack design.

Specifications

Video Output Connector

Function VS-914UF VS-918UF

Video Input Connector

(HD-15 Female)

(HD-15 Female)
Max. Resolution 2048 x 1536 60 Hz

Bandwidth 500 MHz (-3db)

Cable Distance

(Device to Monitor)

Signal Type

Power Adapt er (Min.) DC 12V 600mA

Housing Metal

Weight 680 g 750 g

Dimensions (LxWxH) 220x116x41 mm

4 8

65 m (213 feet) Max.

VGA, SVGA, XGA, QXGA,

UXGA, Multisync

-1-

1

Technical Specifications
Input/Output Signal

Pin # Signal

1 Red video 9 NC
2 Green video 10 Ground
3 Blue video 11 ID0
4 ID2 12 ID1
5 Ground 13 Horizontal Sync
6 Analog Ground 14 Vertical Sync
7 Analog Ground 15 ID3
8 Analog Ground

Pin # Signal

FRONT VIEW

1. Power LED

REAR VIEW

1. Input Power Jack

2. “Video In” Port

3. “Video Out” Port
*There are 4/8 out ports for VS-914UF / VS-918UF.

-2-

Installation

1. Turn off the PC and monito rs.

2. Connect the HD-15 video extension cable between the
PC and the “Video In” port of Distribution Amplifier.

3. Connect the HD-15 video extension cables between
the monitors and the “Video Out” ports of Distribution
Amplifier.

4. Connect the power adapter and turn on the
Distribution Amplifier.

5. Turn on the PC and monitors.

Note:

 If you install the DDC monitor for the Distribution

Amplifier, the rest of monitors must be the same
resolution as the DDC monitor.

 Available monitors include the VGA, SVGA, XGA,

QXGA, UXGA, Multisync, and exclude the CGA, EGA,
Mono.

Operation for cascade:

1. The function to display identical image on more
monitors, you request to attach another Distribution
Amplifier.

2. Connect the HD-15 male/male video extension cable
between the “Video Out 1” port of the former
Distribution Amplifier and the “Video In” port of the
latter Distribution Amplifier.

Note:

Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution
Amplifier.

-3-

P.S.: The example cascades the 4 and 8 ports
Distribution Amplifier; however, you can cascade the
Video Distribution Amplifier with demanded port.

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.

-4-