VGA EXTENDER
VGA-LX
VGA-LX
+
(Local)
VGA-RX
(Remote)
USER MANUAL V1.1
Package Contents for VGA-EX
VGA-LX Local Unit
VGA-RX Remote Unit
1 user manual
2 power adapter DC 12V
1 VGA 1.2M cable (HD-15 Male to Male)
Package Contents for VGA-EX+
VGA-LX+ Local Unit
VGA-RX Remote Unit
1 user manual
2 power adapter DC 12V
1 VGA 1.2M cable (HD-15 Male to Male)
Package Contents for VGA-RX
VGA-RX Remote Unit
1 user manual
1 power adapter DC 12V
Any thing missed, please contact with your vendor.
Introduction
Through the VGA Extender, you can use one PC to display identical image and extension of VGA
signal up to 400 meter on monitor. VGA-RX provides perfect skew delay correction. This delay is
as a divaricately result of transmitting RGB signals over CAT5 cables. The skew level in CAT5
cables is negligible when distances below 150M. However skew become significant when using
CAT5 over longer distances.
Features
Equalization length is adjustable.
VGA signal gain is adjustable.
50ns total delay.
1ns delay resolution.
Specifications
Function VGA-LX
VGA-LX
+
VGA-RX
VGA In Connector HD-15 Female x 1 HD-15 Female x 1 None
VGA Out Connector None HD-15 Female x 1 HD-15 Female x 1
RJ-45 Connector 1
Max. Resolution Depends on remote unit 2048x1536 60Hz
Cable Distance 400 m (Max.)
Power Adapter (Min.) DC 12V
Housing Metal
Weight 135 g 290 g 300 g
Dimensions (LxWxH) 92x34x22 mm 123x75x29 mm
LOCAL FRONT VIEW
VGA-LX VGA-LX+
1. CAT.5 (RJ-45 Connector)
2. Power LED
3. Power jack
LOCAL REAR VIEW
VGA-LX VGA-LX+
1. VGA In (HD-15 Female Connector)
2. VGA Out (HD-15 Female Connector)
REMOTE FRONT VIEW
1. CAT.5 (RJ-45 Connector)
2. Power LED
3. Power jack
REMOTE REAR VIEW
1. VGA Out (HD-15 Female Connector)
REMOTE BOTTOM VIEW
1. B Skew CAL.
2. G Skew CAL.
3. R Skew CAL.
4. GAIN – Adjust brightness
5. EQ – Equalization length adjust (Adjust it and weak characters be sharp)
Installation
1. Turn off the PC.
2. Connect VGA-Extender Local Unit HD-15 female input connector with HD-15 male to male
cable from PC.
3. Connect VGA-Extender Local Unit HD-15 female output connector with HD-15 male to male
cable from monitor.
4. Connect the VGA-Extender Local and Remote Unit with CAT.5 cable.
5. Connect VGA-Extender Remote Unit HD-15 female connector with HD-15 male to male cable
from monitor.
6. Connect the power cord each side.
7. Turn on the monitor and PC.
Wiring Information & Coding
Conductor Identification RJ45 Pin Assignment Color Code for Conductor
5 White-Blue
Pair 1
4 Blue
1 White-Orange
Pair 2
2 Orange
3 White-Green
Pair 3
6 Green
7 White-Brown
Pair 4
8 Brown
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names referred to this manual are the
trademarks or registered trademarks belonging to their respective companies.
Loading...