Avlink SS-918 User Manual

S-VIDEO
Distribution
Amplifier

(SS-914)

(SS-918)

USER MANUAL V1.1

SS-914/SS-918

Package Contents-

 1 AVLINK SS-91 4 or SS-918 S-Video Distribution

Amplifier

 1 user manual
 1 power adapter DC 12V 600mA
 2 rack rails, 6 screws
 1 S-Video 1.2M cable (Male to Male)

Any thing missed, please contact with your vendor.

Introduction

Through the SS-914 or SS-918 S-Video Distribution
Amplifier, you can use one PC/DVD player to display an
identical image on 4,8 projectors or TVs.

S-Video Distribution Amplifier is ideal for:

 Test bench facilities
 Data Center
 Help desks

Features

 Bandwidth 400MHz.
 Compliant with the specification of S-Video.
 Can be cascaded.
 1U 1/2 rack design.

Specifications

Video Output Connector

Function SS-914

Video Input Connector

(S-Video Female)
(S-Video Female)

Cable Distance

(Device to Monitor)

Signal Type Standard S-Video Signal

Power Adapt er (Min.) DC 12V 600mA

Housing Metal

Weight 570 g 630 g

Dimensions (LxWxH) 220x115x41 mm

-1-

4 8

50 m (Max.)

SS-918

1

Technical Specifications
Input/Output Signal

Pin Single

1 Y Ground
2 C Ground
3 Y Video
4 C Video
5 Ground

FRONT VIEW

1. Power LED

REAR VIEW

1. Input Power Jack

2. “S-Video In” Port

3. “S-Video Out” Port
*There are 4/8 out ports for SS-914/SS-918.

-2-

Installation

1. Turn off the PC/DVD player and monitors.

2. Connect the S-Video male extension cable between the
PC/DVD player and the “S-Video In” port of Distribution
Amplifier.

3. Connect the S-Video male/female extension cables
between the monitors and the “S-Video Out” ports of
Distribution Amplifier.

4. Connect the power cord and turn on the Distribution
Amplifier.

5. Turn on the PC/DVD player and monitors.

Operation for cascade:

1. The function to display identical image on more monitors,
you have to attach another Distribution Amplifier.

2. Connect the S-Video male/female extension cable
between the former Distribution Amplifier of the “S-Video
Out 1” port and the latter Distribution Amplifier of the
“S-Video In” port.

Note:

Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.

P.S.: The example cascades the 4 and 8 ports Distribution
Amplifier; however, you can cascade the S-Video
Distribution Amplifier with demanded port.

-3-

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.

-4-