Avlink PG-V1 User Manual
PATTERN
GENERATOR
PG-V1
USER MANUAL
V.2009PGV101.00
Copyright and Trademarks:
All rights reserved by C&C TECHNIC TAIWAN CO., LTD. No part of this
document may be reproduced in any form or by any means without written
permission from the product manufacturer. Changes are periodically
made to the information in this document. They will be incorporated in
subsequent editions. The product manufacturer may make improvements
and /or changes in the product described in this document at any time.
All the registered trademarks referred to this manual are belonging to their
respective companies.
0
Chapter 1 Introduction ..............................................2
1.1 Package Contents............................................2
1.2 Resolution.......................................................3
1.3 Features ..........................................................3
1.4 Specifications .................................................3
1.5 Front Panel......................................................4
1.6 Side Panel .......................................................5
1.6.1 Video Output Port................................5
1.6.2 HD-15 Connector Pin Definition.........5
1.6.3 Power Jack...........................................5
Chapter 2 Connection ...............................................6
2.1 Preparation......................................................6
2.1.1 Plugs ....................................................6
2.1.2 Plug replacement .................................6
2.2 Connect PG-V1 to Monitor ............................7
Chapter 3 Operation..................................................8
3.1 Starting Status.................................................8
3.2 Power and Battery ..........................................9
3.3 MENU Configurations .................................10
3.3.1 Tim configuration..............................10
3.3.2 Ptn configuration ...............................10
3.3.3 Sync configuration ............................11
3.3.4 Hky (Hot key) configuration .............13
Chapter 4 Troubleshooting.....................................14
Appendix A................................................................15
Appendix B................................................................18
1
Chapter 1 Introduction
PG-V1 is a test pattern generator with VGA connector
designed to be a useful tool for the new generation of digital
monitor products. PG-V1 supports up to 20 resolutions and
34 patterns for you to test and calibrate a digital monitor.
Further, it also can improve the quality of digital monitor with
side by side comparisons. Through the friendly interface
and smart design, not only you can easy to use the PG-V1
but also you can reduce your test expenditure.
Caution
To avoid and minimize the risk of damage to PG-V1, please
pay attention to the safety instructions even though the
PG-V1 had been tested for conformance to safety
requirements and certified for international using.
Follow all instructions marked on the device during using.
Do not attempt to maintain the device by yourself, any
faults, please contact your vendor.
Provide proper ventilation and air circulation and do not
use near water.
It is better to keep it in a dry environment.
Only using the power adapter and connection cables that
are supported with the device.
After purchasing and before using the PG-V1 first time,
please charge it continuously for more than 16 hours.
It is better to charge the battery when the battery power
indicator becomes low.
The PG-V1 will save the last setting values automatically.
Do not use liquid or aerosol cleaners to clean the device.
Always unplug the power to the device before cleaning.
1.1 Package Contents
1 VGA pattern generator PG-V1
1 power adapter with DC 12V 1.25A, 4 replaceable plugs
(for USA, UK, Europe and Australia DC plugs.)
1 user manual
1 VGA 1.2M cable (HD-15 Male to Male)
All packages have been checked carefully for their
completeness and functionality before shipped. Please
contact with your vendor if any items listed as above are
missing or damaged.
2
1.2 Resolution
Use for test and calibrating VGA video equipments.
Use for test and calibrating VGA image input devices.
Use for TV/Monitor product lines.
1.3 Features
Intelligent functionality.
With 162 MHz pixel frequency.
Support total 38 timings. (up to UXGA)
Support Sync Type: H/V (TTL), SOG.
Low cost.
Single interface easily use.
Portable design, working time up to 6~8 hours by inside
Re-chargeable battery.
Auto Power-off on Battery mode.
Provide total 34 patterns, Include: Color bar, Gray, Grid,
Block…
By 16x2 Character LCD and key buttons, easily control.
1.4 Specifications
Function PG-V1
Video Output Connector 1 HD-15 Female
Select Switch 7
LCD Module:
16*2 Character Display
Max. Resolution 1600x1200 @ 60 Hz
Highest Pixel Frequency 162 MHz
Cable Distance 5M
Power Adapter (Min.) DC 12V 1.25A
Housing
Weight
Dimensions (LxWxH)
190x95x35 mm
1
Plastic
385 g
3
1.5 Front Panel
1. Video output port
2. LCD Module
3. Function Keys
4. Return
5. Power On/Off
6. Power Jack 2.0ψ
1. Video Output Port: Connect to the attached Video
cable.
2. LCD Module: 16*2 Character Display.
3. Function Keys: Depend on the different operation
configuration will show you different functions of the keys.
4. “
5. “
6. Power Jack: Connect to the DC 12V 1.25A power
” Return: Return to up configuration page.
” Power On/Off: Press at least more than 3 seconds
to power on/ff the PG-V1
adapter.
.
4
1.6 Side Panel
1.6.1 Video Output Port
Use for Video cable connector.
1.6.2 HD-15 Connector Pin Definition
Pin # Signal Pin # Signal
1 Red video 11 NC
2 Green video 12 NC
3 Blue video 13 Horizontal sync
4 NC 14 Vertical sync
5 Ground 15 NC
6 Analog ground
7 Analog ground
8 Analog ground
9 NC
10 Ground
1.6.3 Power Jack
Use for the DC 12V 1.25A power adapter. The Power Jack
is on the right side of the device. PG-V1 supports 4
replaceable plugs (for USA, UK, Europe and Australia DC
plugs.)
Power Jack
5
Loading...