Avlink PG-H1 User Manual

1PATTERN

GENERATOR

PG-H1

USER MANUAL

V.2011PGH101.00

Copyright and Trademarks:

All rights reserved by C&C TECHNIC TAIWAN CO., LTD. No part of this
document may be reproduced in any form or by any means without written
permission from the product manufacturer. Changes are periodically
made to the information in this document. They will be incorporated in
subsequent editions. The product manufacturer may make improvements
and /or changes in the product described in this document at any time.

All the registered trademarks referred to this manual are belonging to their
respective companies.

0

Chapter 1 Introduction......................................... 2

1.1 Package Contents............................................2

1.2 Resolution.......................................................3

1.3 Features ..........................................................3

1.4 Specifications .................................................3

1.5 Front Panel......................................................4

1.6 Side Panel.......................................................5

1.6.1 HDMI Transmission Port ....................5

1.6.2 HDMI Type A Connector pin

definition ......................................................5

1.6.3 Power Jack...........................................5

Chapter 2 Connection ......................................... 6

2.1 Preparation......................................................6

2.1.1 Plugs....................................................6

2.1.2 Plug replacement.................................6

2.2 Connect PG-H1 to Monitor............................7

Chapter 3 Operation............................................ 8

3.1 Starting Status.................................................8

3.2 Power and Battery ..........................................9

3.3 MENU Configurations ...................................9

3.3.1 Tim configuration................................9

3.3.2 Ptn configuration...............................10

3.3.3 Func configuration ............................11

3.3.4 Hky (Hot key) configuration.............13

Chapter 4 Troubleshooting................................ 15

Appendix A........................................................ 16

Appendix B........................................................ 18

1

Chapter 1 Introduction

PG-H1 is a test pattern generator designed to be a useful
tool for the new generation of digital video/monitor products.
PG-H1 supports up 27 resolutions and 34 patterns for you
to test and calibrate a digital video/monitor. Further, it also
can improve the quality of digital video/monitor with side by
side comparisons. Through the friendly interface and smart
design, not only you can easy to use the PG-H1 but also
you can reduce your test expenditure.

Caution

To avoid and minimize the risk of damage to PG-H1, please
pay attention to the safety instructions even though the
PG-H1 had been tested for conformance to safety
requirements and certified for international using.

 Follow all instructions marked on the device during using.
 Do not attempt to maintain the device by yourself, any

faults, please contact your vendor.

 Provide proper ventilation and air circulation and do not

use near water.

 It is better to keep it in a dry environment.
 Only using the power adapter and connection cables that

are supported with the device.

 After purchasing and before using the PG-H1 first time,

please charge it continuously for more than 16 hours.

 It is better to charge the battery when the battery power

indicator becomes low.

 The PG-H1 will save the last setting values automatically.
 Do not use liquid or aerosol cleaners to clean the device.
 Always unplug the power to the device before cleaning.

1.1 Package Contents

 1 HDMI pattern generator PG-H1
 1 power adapter DC 12V, 4 replaceable plugs (for USA,

UK, Europe and Australia DC plugs.)

 1 user manual
 1 HDMI 1.2M cable

All packages have been checked carefully for their
completeness and functionality before shipped. Please
contact with your vendor if any items listed as above are
missed or damaged.

2

1.2 Resolution

 Use for test and calibrate a HDTV monitor.
 Use for test and calibrate HDMI image input devices.
 Use for test and maintain studio equipment as monitors,

cabling and recording equipment.

 Use for test the arrangement of the circuit layout during

the process of construction.

1.3 Features

 Intelligent functionality.
 HDMI & HDCP & DVI compliant.
 Support total 48 timings. (up to UXGA/1080P).
 Cost-down.
 Single interface easy to use.
 Portable design, working time up to 6~8 hours by inside

Re-chargeable battery.

 Auto Power-off on battery mode.
 Provide total 36 patterns, Include: Color bar, Gray, Grid,

Block…

 By 16x2 Character LCD and key buttons, easily control.

1.4 Specifications

Function PG-H1

Output Connector HDMI Type A

Select Switch 7

LCD Module:

16*2 Character Display

Max. Resolution 1600x1200 @ 60 Hz

Highest TMDS Frequency 225 MHz

Cable Distance 5M

Power Adapter (Min.) DC 12V 1.25A

Housing

Weight

Dimensions (LxWxH)

180x95x35 mm

1

Plastic

398 g

3

1.5 Front Panel

1. HDMI Transmission Port

2. LCD Module

3. Function Keys

4. Return

5. Power On/Off

6. Power Jack

1. HDMI Transm ission Port: Connect to the attached

HDMI 3M cable.

2. LCD Module: 16*2 Character Display.

3. Function Keys: Depend on the different operation

configuration will show you different functions of the keys.

4. “

5. “

6. Power Jack: Connect to the DC 12V 1.25A power

” Return: Return to up configuration page.
” Power On/Off: Press at least more than 3 seconds

to power on/ff the PG-H1

adapter.

.

4

1.6 Side Panel

1.6.1 HDMI Transmission Port
Use for HDMI 3M cable connector.

1.6.2 HDMI Type A Connector pin definition

Pin # Signal Pin # Signal

1 TMDS Data2+ 11 TMDS Clock Shield

2 TMDS Data2 Shield 12 TMDS Clock-

3 TMDS Data2- 13 NC

4 TMDS Data1+ 14 NC

5 TMDS Data1 Shield 15 DDC-SCL

6 TMDS Data1- 16 DDC-SDA

7 TMDS Data0+ 17 DDC-Ground

8 TMDS Data0 Shield 18 +5V Power

9 TMDS Data0- 19

10 TMDS Clock+

1.6.3 Power Jack

Use for the DC 12V 1.25A power adapter. The Power Jack

is on the right side of the device. PG-H1 supports 4
replaceable plugs (for USA, UK, Europe and Australia DC
plugs.)

Power Jack

Hot Plug Detect

5