Avlink MRM-701 User Manual
Multi-Format to
HDMI Conversion
Box
(MRM-701)
USER MANUAL V1.0
MRM-701
Package Contents-
1 MRM-701
1 user manual
1 power adapter DC 12V with lock
1 remote controller
1 RS-232 1.8M cable (DB-9 Male to Female)
1 RS-232 control software CD
2 rack rails, 6 screws for MRM-701 only
Any thing missed, please contact with your vendor.
Introduction
The MRM-701 is a multi-format to HDMI convertor for
digital and analog video input. It combines five
independent switchers in a single compact enclosure: 3x1
HDMI with embedded audio, 1x VGA, 1x YPbPr video, 1x
CVBS, 1x S-Video, and 4x1 analog stereo audio. The
MRM-701 features three selectable switching modes,
including the ability to route all and HDMI sources to the
display using a single HDMI cable. Continuous EDID
communications between the HDMI and VGA sources and
the display device ensures the reliable display of video.
HDMI inputs and outputs are HDCP compliant, ensuring
display of content protected media. The MRM-701 is ideal
for use in single-display applications that require a hybrid
switcher for integration of digital and analog video sources
and associated audio signals.
Features
Deep Color video up to 12-bits, 1080p@60Hz (when
HDMI input to HDMI output)
Compliant with HDMI 1.3a and DVI 1.0 standards
Fully HDCP compliant
Video Inputs: 3 x HDMI, 1 x VGA, 1x YPbPr, 1 x
CVBS, 1 x S-Video
Audio Inputs: 3 x HDMI, 3 x 2-chn RCA(work with
YPbPr/ CVBS/ S-Video), 1*x3.5mm (work with VGA)
Video Output: 1 x HDMI
Audio Output: 1x 2-chn analog RCA
IR Remote controller for operation.
Computer can be used RS 232 to control the
MRM-701
1U rack design
Specifications
Function MRM-701
HDMI Input Connector 3
VGA Input Connector 1
YPbPr Input Connector 1
CVBS Input Connector 1
S-Video Input Connector 1
HDMI Output Connector 1
Max. Resolution UXGA, 1080p
Remote control port
Power Adapter (Min.) DC 12V with lock
Housing Metal
Weight 1800g
Dimensions (LxWxH) 384x173x45mm
FRONT VIEW
3
RS232, 9600, 8 data bit,
no parity, 1 stop bit
2
1
-1-
1. Input port selection switch
Press the switch to access the selected video source.
2. Port LEDs
LED lights up when the input port has been
successfully selected.
3. IR receiver
Take aim at IR receiver with remote controller.
REAR VIEW
1 2 34 3 5
1. Power Supply
Plug the power adapter.
2. RS232 port
Use a 9-pin RS-232 cable to connect both computer
serial port and MRM-701’s RS-232 port, refer to”
Matrix Application Software“
3. Video Input port
3 x HDMI, 1 x VGA, 1x YPbPr, 1 x CVBS, 1 x S-Video
4. HDMI out port
5. Audio input port
Work with input port: VGA, YPbPr, CVBS, S-Video
Installation
Before the installation, making sure the MRM-701 and
monitor are turning off.
1. Making sure all equipments are turned off.
2. Plug the monitor cable into the HDMI OUT port
connector.
3. Plug the extension cables from video source device
(DVD player, PC, Digital camera) into the Video IN port
connectors.
4. Plug the power adapter into the wall socket.
5. Connect the power adapter with the HDMI selector.
6. Turn on the monitor first.
7. Turn on the DVD player/TV receiver.
Operation
1. Port selection
Press the button of “port selection switch” for
accessing the wanted DVD player/TV receiver.
The selected corresponding port will light on for the
LEDs which indicating the port is actived.
-2-
2. IR remote control
Use “1” ~”7” key to select video input port.
Use “◄”, “►” key to select another video input port.
Use ” ” key to power on/off MRM-701.
Support HDMI mode
Max resolution: UXGA(1600x1200@60), 1080p@60, 12-bit.
Support VGA mode
Analog Resolution Frequency(Hz)
VGA 640x480 60 / 72 / 75 / 85
VGA 720x400 70 / 85
SVGA 800x600 56 / 60 / 72 / 75 / 85
WVGA 848x480 60
XGA 1024x768 60 / 70 / 75 / 85
SXGA 1152x864 75
SXGA 1280x768 60RB/ 60 / 75 / 85
WXGA 1280x800 60
SXGA 1280x960 60 / 85
SXGA 1280x1024 60 / 75 / 85
WXGA 1360x768 60
SXGA+ 1400x1050 60RB / 75
WXGA+ 1440x900 60
SXGA+ 1440x1050 60
UXGA 1600x1200 60
WSXGA+ 1680x1050 60
1080p 1920x1080 60
WUXGA 1920x1200 60RB
720p 1280x720 60
Support YPbPr mode
Analog Resolution Frequency(Hz)
480i 720x480 60
576i 720x576 50
480p 720x480 60
576p 720x576 50
720p 1280x720 50 / 60
1080i 1920x1080 50 / 60
1080p 1920x1080 50 / 60
-3-
Support CVBS/ S-Video mode
Analog Resolution Frequency(Hz)
480i 720x480 60
576i 720x576 50
Matrix Application Software
Software Introduction
The 《AV Matrix》 Matrix control software applies to
different input/output matrixes.
Software Activation
Power on the computer: Implement the AV Matrix.msi to
activate installation screen as below, click “Next”. And
follow the instructions on screen to finish the installation.
Connect MRM-701 and PC
You must power off the MRM-701. Then, connect the
MRM-701’s RS-232 port to the PC’s RS-232 port.
Matrix Configuration
After finishing installation, click
AV Matrix Application. In the “Options” screen, select the
connected PC Port number and Baud rate, and then click
“OK”.
-4-
to active
Press the “Scan” and found the connected MRM-701 first.
Then use mouse cursor to select which input port to switch,
and press the left button
Communication Protocol/Control Command Code
Communication Protocol: Baud rate 9600bps, no odd or
even calibration bit address, 8bit transmission address,
1bit stop address. Please refer to the “Command list.pdf”
in the CD-ROM for more relative Command Code
information.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-5-
Loading...