Avlink HSC-12 User Manual
HDMI
Distribution
Amplifier
(HSC-12)
1 In 2 Out
USER MANUAL V1.0
HSC-12
Package Contents-
1 AVLINK HSC-12HDMI Distribution Amplifier
1 user manual
1 USB-DC PLUG CABLE
Any thing missed, please contact with your vendor.
Introduction
Through the HDMI Distribution Amplifier, you can use one
DVD player/TV receiver to display identical image on 2
projectors or HDTV by HDMI port.
HDMI Distribution Amplifier is ideal for:
Test bench facilities
Data Center
Help desks
Features
USB power available.
Compliant with the specification of HDMI 1.3.
Support high-resolution display up to UXGA, 480p, 480i,
720p, 1080i, 1080p.
Can be cascaded.
Specifications
Function HSC-12
HDMI Input Connector
(A-Type Male)
HDMI Output Connector
(A-Type Female)
Max. Resolution
Cable Distance
(Device to Monitor)
Signal Type
Power Adapter (Min.)
Housing
Weight
Cable Length 280 mm
Dimensions (LxWxH)
Standa rd HDMI Signal
85.5 x 52.7 x 20.3 mm
-1-
1
2
UXGA, 1080p
10m (Max.)
DC 5V
Plastic
120 g
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
TMDS Data 2+
1
TMDS Data 2 Shield
2
TMDS Data 2-
3
TMDS Data 1+
4
TMDS Data 1 Shield
5
TMDS Data 1-
6
TMDS Data 0+
7
TMDS Data 0 Shield
8
TMDS Data 0-
9
TMDS Clock+
10
TMDS Clock Shield
11
TMDS Clock -
12
CEC
13
Reserved
14
(N.C. on device)
SCL
15
SDA
16
DDC/CEC Ground
17
+5 Power
18
Hot Plug Detect
19
FRONT VIEW
1. Power LED
Power LED
HDMI
INPUT”
Port
-2-
SIDE VIEW
HDMI
Out2” Port
Input
Power Jack
HDMI
Out1” Port
1. Input Power Jack
2. “HDMI In” Port
3. “HDMI Out1” Port
4. “HDMI Out2” Port
Installation
1. Turn off the DVD player/TV receiver an d monitors.
2. Connect the HDMI male extension cable between the
DVD player/TV receiver and the “HDMI In” port of
Distribution Amplifier.
3. Connect the HDMI male/female extension cables
between the monitors and the “HDMI Out” ports of
Distribution Amplifier.
4. Connect the power cord and turn on the Distribution
Amplifier.
5. Turn on the DVD player/TV receiver and monitors.
Note:
Have to install all TVs with the same resolution limited.
-3-
Operation for cascade:
1. The function to display identical image on more
monitors, you have to attach another Distribution
Amplifier.
2. Connect the HDMI male/female extension cable
between the former Distribution Amplifier of the “HDMI
Out 1” port and the latter Distribution Amplifier of the
“HDMI In” port.
Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.
P.S.: The example cascades the 2 and 4 ports Di stribution
Amplifier; however, you ca n cascade the HDMI Distribution
Amplifier with demanded port.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
DVD
HSC-12
-4-
Loading...