Page 1
HDMI
Distribution
Amplifier
(HS-2312FS)
1 In 2 Out
(HS-2314FS)
1 In 4 Out
(HS-2318FS)
1 In 8 Out
(HS-2328FS)
2 In 8 Out
USER MANUAL V1.1
HS-2312FS / HS-2314FS
/ HS-2318FS / HS-2328FS
Package Contents-
1 AVLINK HS-2312FS or HS-2314FS or HS-2318FS or
HS-2328FS HDMI Distribution Amplifier
1 user manual
1 HDMI 1.8M cable (Male to Male)
1 power adapter DC 12V 600mA for HS-2312FS,
HS-2314FS
1 AC power cord for HS-2318FS, HS-2328FS
2 rack rails, 8 screws for HS-2314FS only
2 rack rails, 6 screws for HS-2318FS, HS-2328FS
Any thing missed, please contact with your vendor.
Introduction
Through the HDMI Distribution Amplifier, you can use one
DVD player/TV receiver to display identical image on 2,4,8
projectors or HDTV by HDMI port.
HDMI Distribution Amplifier is ideal for:
Test bench facilities
Data Center
Help desks
Features
Use PanelLink digital technology.
Compliant with the specification of HDMI.
Support high-resolution display up to UXGA, 480p, 480i,
720p, 1080i, 1080p, deep color up 12 bits.
2 HDMI input and select one to all output (displays) by
switch key on front panel (HS-2328FS only).
Can be cascaded.
1U rack design for HS-2314FS, HS-2318FS,
HS-2328FS.
Specifications
Function
HDMI Input Connector
(A-Type Female)
HDMI Output Connector
(A-Type Female)
Max. Resolution UXGA, 1080p (12Bits)
Cable Distance
(Device to Monitor)
Signal Type Standard HDMI Signal
Power Adapter (Min.) DC 12V 600mA AC 100~240V
Housing Metal
Weight 620 g 975 g 2340 g 2360 g
Dimensions (LxWxH)
mm
HS-2312FS HS-2314FS HS-2318FS HS-2328FS
1 2
2 4 8
10 m (Max.)
200x75x45
269x104
x45
440x185x45
-1-
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
TMDS Data 2+
1
TMDS Data 2 Shield
2
TMDS Data 2-
3
TMDS Data 1+
4
TMDS Data 1 Shield
5
TMDS Data 1-
6
TMDS Data 0+
7
TMDS Data 0 Shield
8
TMDS Data 0-
9
TMDS Clock+
10
TMDS Clock Shield
11
TMDS Clock -
12
CEC
13
Reserved
14
(N.C. on device)
SCL
15
SDA
16
DDC/CEC Ground
17
+5 Power
18
Hot Plug Detect
19
FRONT VIEW
1. Power LED
REAR VIEW
1. Input Power Jack
2. “HDMI In” Port
3. “HDMI Out” Port
*There are 2/4/8 out ports for HS-2312FS / HS-2314FS
/ HS-2318FS (HS-2328FS).
-2-
Page 2
Installation
1. Turn off the DVD player/TV receiver an d monitors.
2. Connect the HDMI male extension cable between the
DVD player/TV receiver and the “HDMI In” port of
Distribution Amplifier.
3. Connect the HDMI male/female extension cables
between the monitors and the “HDMI Out” ports of
Distribution Amplifier.
4. Connect the power cord and turn on the Distribution
Amplifier.
5. Turn on the DVD player/TV receiver and monitors.
Note:
Have to install all TVs with the same resolution limited.
We suggest user connect TV from “HDMI Out 1” first.
Because Distribution Amplif ier will simulation EDID from
“HDMI Out 1”.
We suggest user connect source equipment to
Distribution Amplifier by 1.8M cable for better video
quality.
Operation for cascade:
1. The function to display identical image on more
monitors, you have to attach another Distribution
Amplifier.
2. Connect the HDMI male/female extension cable
between the former Distribution Amplifier of the “HDMI
Out 1” port and the latter Distribution Amplifier of the
“HDMI In” port.
Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.
-3-
P.S.: The example cascades the 2 and 4 ports Distribution
Amplifier; however, you ca n cascade the HDMI Distribution
Amplifier with demanded port.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-
Loading...