HDMI
Pin #
Signal
Pin #
Signal
Distribution
Amplifier
(HS-1414W)
1 In 4 Out
(HS-1418W)
1 In 8 Out
USER MANUAL V1.0
HS-1414W / HS-1418W
Package Contents-
1 AVLINK HS-1414W or HS-1418W HDMI Distribution
Amplifier
1 user manual
1 power adapter DC 12V with lock
2 screws
4 foot pads
Anything missed, please contact with your vendor.
Introduction
Through the HDMI Distribution Amplifier, you can use one
DVD player/TV receiver to display identical image on 4,8
projectors or HDTV by HDMI port.
HDMI Distribution Amplifier is ideal for:
Test bench facilities
Data Center
Help desks
Features
Supports 3D
HDCP Compliant
Compliant with the specification of HDMI
Support high-resolution display up to
1080p@60Hz(12-bit)
DDC copy from port 1
Can be cascaded
CEC Bypass port 1
Specifications
Function HS-1414W HS-1418W
HDMI Input
Connector
(A-Type Female)
HDMI Output
Connector
(A-Type Female)
Max. Resolution 1080p@60Hz(12-bit)
Cable Distance
(Device to Monitor)
Signal Type Standard HDMI Signal
Power Adapter
(Min.)
Housing Metal
Weight 620 g 655 g
Dimensions
(LxWxH)
171x120x25 mm 240x120x25mm
4 8
-1-
1
10 m (Max.)
DC 12V
Technical Specifications
Input/Output Signal
TMDS Data 2+
1
TMDS Data 2 Shield
2
TMDS Data 2-
3
TMDS Data 1+
4
TMDS Data 1 Shield
5
TMDS Data 1-
6
TMDS Data 0+
7
TMDS Data 0 Shield
8
TMDS Data 0-
9
TMDS Clock+
10
FRONT VIEW
1. “HDMI In” Port
2. “HDMI Out” Port
TMDS Clock Shield
11
TMDS Clock -
12
CEC
13
Reserved
14
(N.C. on device)
SCL
15
SDA
16
DDC/CEC Ground
17
+5 Power
18
Hot Plug Detect
19
-2-
REAR VIEW
Trademarks:
1. F/W Upgrade
2. Reset
3. Mode:
SW1 SW2
ON ON Standard Tx/Rx
ON OFF
OFF ON Standard Repeater
OFF OFF
4. 1~4 / 1~8 Out port LED
5. HDCP LED
6. HDMI In LED
7. Power LED
8. DC 12V Input
EDID
Standard : EDID parsing
ECO : EDID Copy from OUT 1
HDCP
Tx/Rx: Transmitter/Receiver independent mode
Repeater: HDCP repeater mode
*When Mode changes HS-1414W/HS-1418W must be
reset
*There are 4/8 out ports for HS-1414W / HS-1418W .
EDID HDCP
ECO Tx/Rx
Reserve
Installation
1. Turn off the DVD player/TV receiver and monitors.
2. Connect the HDMI male extension cable between the
DVD player/TV receiver and the “HDMI In” port of
Distribution Amplifier.
3. Connect the HDMI male/female extension cables
between the monitors and the “HDMI Out” ports of
Distribution Amplifier.
4. Connect the power cord and turn on the Distribution
Amplifier.
5. Turn on the DVD player/TV receiver and monitors.
-3-
Note:
Have to install all TVs with the same resolution limited.
We suggest user connect TV from “HDMI Out 1” first.
Because Distribution Amplifier will simulation EDID from
“HDMI Out 1”.
We suggest user connect source equipment to
Distribution Amplifier by 1.8M cable for better video
quality.
Operation for cascade:
1. The function to display identical image on more
monitors, you have to attach another Distribution
Amplifier.
2. Connect the HDMI male/female extension cable
between the former Distribution Amplifier of the “HDMI
Out 1” port and the latter Distribution Amplifier of the
“HDMI In” port.
Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution Amplifier.
P.S.: The example cascades the 4 and 8 ports Distribution
Amplifier; however, you can cascade the HDMI Distribution
Amplifier with demanded port.
-4-
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-5-
Loading...