AVLink HRM-212F, HRM-214F User Manual

HDMI
SELECTOR

(HRM-212F)

(HRM-214F)

USER MANUAL

V1.4

HRM-212F / HRM-214F

Package Contents -

 1 AVLINK HRM-212F or HRM-214F HDMI

Selector

 1 user manual
 1 power adapter DC 9V 600mA for HRM-212F
 1 power adapter DC 12V 600mA for HRM-212F
 1 remote controller

Any thing missed, please contact with your vendor.

Features

 HDTV resolution up to 1080p (12Bits) or 1200p

(8Bits).

 Compliant with the specification of HDMI 1.3.
 Remote controller for operation.
 Hot pluggable.
 Auto skips over the power-off and unplugged cable.

Specification

Function HRM-212F HRM-214F

HDMI Input Connector

(A-Type Female)

2 4

HDMI Output Connector

(A-Type Female)

1

LEDs 2 4

Select Switch 1 4

Max Pixel clocks 225MHz

Power Adapter (Min.)

DC 9V

600mA

DC 12V

600mA

Housing Aluminum

Weight 210 g 285 g

Dimensions (LxWxH) mm 130x81x29.5 200x81x29.5

Hardware Requirements

Requirement specifications

HDTV

One LCD, PLASMA TV or projector
with HDMI input function.

DVD player

/ TV Receiver

HDMI output function.

Cable HDMI male to male Standard cable.

-1-

FRONT VIEW

1. Port Selection Switches (Manual type)
Press the switch to access the selected DVD
player/TV receiver.

2. Port LEDs
 All the red LEDs flash while the power adapter is

well connected.

 Green LEDs light up while the DVD player/TV

receiver has well connected and starting
operation.

 Red LEDs light up while the DVD player/TV

receiver has successfully been selected.

3. IR Receiver
Take aim at IR receiver with remote controller.

Rear View

1. Power Supply
Plug the power adapter.

2. HDMI OUT Port Connector
Plug the monitor cable.

3. HDMI IN Port Connectors
Plug the extension cables from HDMI port of HDMI
output port of device.

-2-

Installation

Before the installation, making sure the selector and
monitor (projector) are turning off.

1. Making sure all equipments are turned off.

2. Plug the monitor cable into the HDMI OUT port
connector.

3. Plug the extension cables from HDMI port of DVD
player/TV receiver into the HDMI IN port connectors.

4. Plug the power adapter into the wall socket.

5. Connect the power adapter with the HDMI selector.

6. Turn on the monitor first.

7. All red LEDs will flash back and forth, otherwise, go
back to check the step 4 and 5.

8. Turn on the DVD player/TV receiver .

9. The LEDs green light turn on while the DVD player/TV
receiver have well been connected and maintaining
the activation.

Operation

1. Port selection

 Press the button of “port selection switch” for

accessing the wanted DVD player/TV receiver.

 The selected corresponding port will light on for the

red LEDs which indicating the port is actived.

2. IR remote control

 Use “1”, ”2” key to select DVD player/TV receiver

that wanted DVD player/TV receiver.

 Use “

▲

”, “▼” key to select another DVD player/TV

receiver.

 Use ”

” key to power on/off selector.

-3-

Technical Specifications
Input/Output Signal

Pin # Signal Pin # Signal

1

TMDS Data 2+

11

TMDS Clock Shield

2

TMDS Data 2 Shield

12

TMDS Clock -

3

TMDS Data 2-

13

CEC

4

TMDS Data 1+

14

Reserved
(N.C. on device)

5

TMDS Data 1 Shield

15

SCL

6

TMDS Data 1-

16

SDA

7

TMDS Data 0+

17

DDC/CEC Ground

8

TMDS Data 0 Shield

18

+5 Power

9

TMDS Data 0-

19

Hot Plug Detect

10

TMDS Clock+

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.

-4-