Avlink HDM-SXW+ User Manual

HDMI
EXTENDER

HDM-SLW+ HDM-ELW+

HDM-EPLW+

(Local)

HDM-SRW+ HDM-ERW+

HDM-EPRW+

(Remote)

USER MANUAL V1.0

HDM-SXW+ / HDM-EXW+
/HDM-EPXW+

Package Contents-

 1x HDM-SLW+ or HDM-ELW+ or HDM-EPLW+ Local

Unit

 1x HDM-SRW+ or HDM-ERW+ or HDM-EPRW+

Remote Unit

 1 user manual
 2x Power adapter DC 12V with lock (for

HDM-SXW+/HDM-EXW+)

 1x Power adapter DC 48V with lock and Power Cord

(for HDM-EPXW+ )

 1x IR Blaster Cable(Peak Wavelength 940nm)
 1x IR Receiver Cable
 4x screws
 8x foot pads

Any thing missed, please contact with your vendor.

Features

 Through the HDMI Extender, you can use one DVD to

display identical image and extension of HDMI signal
up to 70/100 meter on HDTV

 HDCP Compliant
 Supports 3D pass-through
 Support RS-232(Bi-direction transfer)
 Supports all frequency band IR control
 One CAT.5 cable extension
 Supports HDTV up to 4k2k
 HD-baseT technology
 Use CAT.5 cable to install easily
 Cable Distance
 Supports Power over Cable(EPXW+ ONLY )

Undervoltage, Overvoltage and Thermal Protection
Short-Circuit Protection with Auto-Restart

 Support HDMI DA (Local unit)

Resolution Cable Type HDM-SXW+

1080P(12bit)

4Kx2K

Cat5e/Cat6
Cat6a/Cat7
Cat5e/Cat6
Cat6a/Cat7

60M 100M
70M 100M
35M 70M
40M 100M

HDM-EXW+ /
HDM-EPXW+

Specifications

Function Local Remote

HDMI In

Connector

HDMI A-Type Female

x 1

-1-

None

HDMI Out

Connector

RJ-45 Connector

IR OUT 3.5ψ Stereo Jack x 1

IR2 IN 3.5ψ Stereo Jack x 1

Max. Resolution

Cable Distance

Power Adapter

(Min.)

Housing Metal

Weight

Dimensions

(LxWxH)

HDMI A-Type

Femalex1(DA)

100M (EXW+ / EPXW+)

DC 12V with lock (for EXW+/SXW+)

DC 48V with lock (for EPXW+)

472g(SXW+ /EXW+)

513g(EPXW+)

171x120x25 mm(for

EXW+/SXW+)

171x120x35 mm (for

EPXW+)

HDMI A-Type Female

1

4k2k

70 M (SXW+)

292g(SXW+ /EXW+)

x 1

328g(EPXW+)

150x80x25 mm (for

EXW+/SXW+)

150x80x35 mm (for

EPXW+)

LOCAL FRONT VIEW

1. RS-232

2. IR OUT

3. IR IN

4. LED

LOCAL REAR VIEW

1. Power jack (12V DC for SXW+/EXW+, 48V DC for
EPXW+)

2. LINK (RJ-45 Connector)

3. HDMI OUT (DA)

4. HDMI IN

REMOTE FRONT VIEW

1. IR2 IN

2. IR OUT

3. IR1 IN

4. LED

-2-

REMOTE REAR VIEW

Pin #

Signal

Pin #

Signal

Conductor

RJ45 Pin

Color Code for

Trademarks:

1. Power jack (SXW+ / EXW+)

2. LINK (RJ-45 Connector)

3. HDMI OUT

4. RS-232

Installation

1. Turn off the DVD and HDTV.

2. Connect the HDMI extension cable between the DVD
and the “HDMI IN” port of HDM-SLW+ or HDM-ELW+ or
HDM-EPLW+.

3. Connect the HDMI extension cable between the HDTV
and the “HDMI OUT” port of HDM-SRW+ or
HDM-ERW+ or HDM-EPRW+.

4. Connect the CAT.5 cables between the HDM-SLW+ or
HDM-ELW+ or HDM-EPLW+ “LINK” port and the
HDM-SRW+ or HDM-ERW+ or HDM-EPRW+ “LINK”
port of extender.

5. Connect the power cord and turn on the extender.

6. Turn on the DVD and HDTV.

IR Receiver Cable Directions:

Put it into the HDM-SRW+ or HDM-ERW+ or HDM-EPRW+
“IR2 IN” port and place the IR Receiver Cable, so that you
can point to it easily with your IR remote controller.

IR Blaster Cable Directions:

Plug IR blaster cable plug into HDM-SLW+ or HDM-ELW+
or HDM-EPRW+ “IR OUT” port, It sits in front of the DVD
receiver’s IR sensor, which is located on the front-panel.

Additional Options

Select any additional options you may require.

1. IR Receiver Cable

GND
+V
Sig

-3-

2. IR Blaster Cable

NC
P+
N-

Technical Specifications Output Signal

TMDS Data 2+

1

TMDS Data 2 Shield

2

TMDS Data 2-

3

TMDS Data 1+

4

TMDS Data 1 Shield

5

TMDS Data 1-

6

TMDS Data 0+

7

TMDS Data 0 Shield

8

TMDS Data 0-

9

TMDS Clock+

10

TMDS Clock Shield

11

TMDS Clock -

12

CEC

13

Reserved

14

(N.C. on device)
SCL

15

SDA

16

DDC/CEC Ground

17

+5 Power

18

Hot Plug Detect

19

Wiring Information & Coding

Identification

Pair 1

Pair 2

Pair 3

Pair 4

Assignment

5 White-Blue
4 Blue
1 White-Orange
2 Orange
3 White-Green
6 Green
7 White-Brown
8 Brown

-4-

Conductor

Note

However sometimes, especially in demonstrations or in a
lab environment, the cable is rolled randomly in small turns
for convenience. The randomly rolled UTP cable suffers
additional signal impairments (compared to a straight cable)
and therefore the maximal operating reach might be
reduced.
Rolling a CAT5E cable around a 70cm fixed diameter
plastic drum has just a minor effect on the FEXT (Far End
Cross Talk) when compared to a fully stretched
cable.

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.

-5-