Avlink BS-1216PF User Manual

RGBHV
Distribution
Amplifier

(BS-1213PF)

1 In 3 Out

(BS-1216PF)

1 In 6 Out

USER MANUAL V1.0

BS-1213PF / BS-1216PF

Package Contents-

 1 AVLink BS-1213PF or BS-1216PF RGBHV

Distribution Amplifier

 1 user manual
 1 AC power cord
 2 rack rails, 6 screws

Any thing missed, please contact with your vendor.

Introduction

Through the RGBHV Distribution Amplifier BS-1213PF,
BS-1216PF, you can use one PC or DVD player or VCR
to display identical image on 3,6 HDTV monitors or even
more.

Features

 Bandwidth 500 MHz (-3db).
 Compatible with RGBHV, RGsB, RsGsBs, component

video, S-Video and composite video signals.

 AC/DC coupling per input.
 Long cable gain offset.
 1U rack design.

Specifications

Set (RGBHV) BNC Female

Video Output Connector

Set (RGBHV) BNC Female

Function BS-1213PF BS-1216PF

Video Input Connector

3 6

Max. Resolution 2048 x 1536 60 Hz

Bandwidth 500 MHz (-3db)

Cable Distance

(Device to Monitor)

Power Adapt er (Min.) AC 100~240V / 50~60Hz

Housing Metal

Weight 2450g 2540g

Dimensions (LxWxH) 440x192x42mm

65 m (213 feet) Max.

-1-

1

FRONT VIEW

1. Power LED

REAR VIEW

1. Input AC Power Socket

2. Power Switch

3. AC/DC coupling and GAIN Switch
Pin1 is AC/DC coupling Switch, “ON” for AC
Pin2 is GAIN Switch

4. “RGBHV In” Port

5. “RGBHV Out” Port

*There are 3/6 out ports for BS-1213PF / BS-1216PF.

Installation

1. Turn off the PC or DVD player or VCR and HDTV
monitors.

2. Connect the RGBHV male extension cable between
the DVD player or VCR and the “RGBHV In” port of
BS-1213PF / BS-1216PF.

3. Connect the RGBHV male extension cables between
the HDTV monitors and the “RGBHV Out” ports of
BS-1213PF / BS-1216PF.

4. Connect the power cord and turn on the BS-1213PF /
BS-1216PF.

5. Turn on the PC or DVD player or VCR and HDTV
monitors.

Note:

 If the supply signal is component or composite, then

must project on the AC coupling input.

-2-

Operation for cascade:

1. The function to display identical image on many
monitors, you have to attach another Distribution
Amplifier.

2. Connect the RGBHV male extension cable
between the former Distribution Amplifier of the
“RGBHV Out” port and the latter Distribution Amplifier
of the “RGBHV In” port.

Note:

Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution
Amplifier.

P.S.: The example cascades the 3 and 6 ports
Distribution Amplifier; however, you can cascade the
RGBHV Distribution Amplifier with demanded port.

© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.

Trademarks:

All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.

-3-