AV LINK BNC100 User Manual

Bluetooth Active Noise Cancelling Headphone

Model No.: BNC100

FCC ID: R2M-BNC100

User manual

Important Safety Instruction

If used in the correct method, this design and production of this product can ensure your personal
safety completely. However, any inappropriate use may lead to potential risk and danger of
electric shock or fire hazard. Please read all the safety instructions before installing and using the
product. In particular, attention shall be given to the following information:

1. It needs to be stored or used in the ambient temperature.

2. It shall not be placed in water or wet locations.

3. It cannot be disposed randomly because it may cause environmental pollution.

4. Without approval, it shall not be disassembled or repaired.

5. The built-in lithium battery can’t be disposed in the fire or other places to prevent causing fire

hazards.

6. It shall be cleaned with dry cloth.

7. Whenever there is damage, it needs to be repaired by professional personnel.

Headphone overview

1. ANC switch

2. Monitor (for the surrounding sound)

3. Battery meter

4. USB charging port

5. Bluetooth LED indicator

6. MFB (Power on / Power off / Call / Pair button)

7. Touch panel (Play/pause, Volume +/-, Last track / next track)

8. AUX jack

9. Microphone

Power on / off

Powering on

 Ensure the headphones are turned off.
 Press the MFB button (6) until a “beep” sound is heard then release the button
 A solid or flashing blue light on the right side should indicate that the BNC100 is powered on

Powering off